(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Screw-Hole-Related Tools（Page3）

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

518 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less

Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

OSG

Enables efficient chip discharge by discharging cutting fluid from the oil holes.

Days to Ship: 15 Day(s) or more
LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

Days to Ship: 16 Day(s) or more
Pointed Tap for Difficult-To-Cut Materials CPM-POT

OSG

The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Days to Ship: 2 Day(s) or more
Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT

OSG

Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.

Days to Ship: 16 Day(s) or more
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

OSG

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

Days to Ship: 16 Day(s) or more
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Days to Ship: 16 Day(s) or more
Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS

OSG

As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials

Days to Ship: 2 Day(s) or more
MACHINING CENTER Tap (Normal Length)_EX-S-MCT

OSG

Cutting chip bite, easily generated with horizontal machining centers, is kept to a minimum, and stable performance is achieved.

Days to Ship: 16 Day(s) or more
Epoch D Thread Mill EDT-□.□□-□□-TH

MITSUBISHI HITACHI TOOL

[Features]
· Simultaneous drilling and thread cutting can be performed with 1 tool.
· Please use the product with the spindle reversed for the left blade.

STOCK
Days to Ship: 12 Day(s)
Hand Tap (for Metric Screws/HSS-E)

TRUSCO NAKAYAMA

[Features]
· Can be used for both through holes and blind holes.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.

STOCK
Days to Ship: 1 Day(s)
Round Die For Metric Screw

TRUSCO NAKAYAMA

[Features]
· Dimensional adjustments can be made with the adjustment screw provided.
· Can also be used to modify screw threads.
· For round dies.
[Applications]
· Work materials: iron, light metals.
· For male threading.
· Correction of coarse screw threads.

STOCK
Days to Ship: 1 Day(s)
Hexagonal Re-threading Die (Metric Fine Screw)

TRUSCO NAKAYAMA

[Features]
· To be used when modifying screw threads.
· Work can be done using a monkey wrench.
· This product can be used in place of a round die when modifying the screw thread ridges.
· Used when cleaning out bolts/screws.
[Applications]
· Modification of fine threads.

STOCK
Days to Ship: 1 Day(s)
Hexagonal Re-threading Die (Whitworth Screw)

TRUSCO NAKAYAMA

[Features]
· Used when cleaning out bolts/screws.
· To be used when modifying screw threads.
· Work can be done using a monkey wrench.
· This product can be used in place of a round die when modifying the screw thread ridges.
[Applications]
· For fixing BSW (Whitworth) Thread.

STOCK
Days to Ship: 1 Day(s)
Broken Tap Extractor (4 Claws)

TRUSCO NAKAYAMA

[Features]
· A tool that extracts broken taps when broken partway through threading without damaging the screw threads.
· The claw uses a special steel wire with high torsion strength that is not easily broken, so it can be used to easily remove broken taps which have caught strongly.
· Even if the claw is broken, it can be used repeatedly until it becomes too short. Also, since it can be simply exchanged with a replacement jaw, it is extremely economical.
· Dedicated for hand tapping.
[Applications]
· For extracting broken hand taps.

Days to Ship: 1 Day(s)
Spiral Flute Tap (SKH)

SKC

[Applications]
Can be used for tapping screw holes in stainless steel.
[Features]
This spiral flute tap can discharge chips with a coiled groove.

Days to Ship: 17 Day(s) or more
Tire Valve Thread

SKC

[Applications]
It can be used to tap threaded holes in tire valves.
[Features]
High speed steel with excellent heat resistance and thermal damage resistance is used.

Days to Ship: 16 Day(s) or more
Hand Tap, Product for DIY

SKC

Threaded part has an outstanding finish

Days to Ship: Same day
Hand Tap, for Metric Fine Threads (Angle: 60°)

SKC

[Applications]
It can be used for engraving thread grooves of fine threads.
[Features]
For right-hand threads.

Days to Ship: Same day or more
Spiral Tap / Drill Set【21 Pieces Per Package】

ISHIHASHI

Set in steel case including spiral taps, pilot hole drills, and tap wrenches

STOCK
Days to Ship: 12 Day(s)
Spiral Tap for Blind Hole 1013

GUHRING

[Features]
· JIS standard compliant tap for blind holes.
· Supports a wide range of work materials from general steel to stainless steel.

Days to Ship: 10 Day(s) or more
For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP

YAMAWA MFG

Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Suitable for blind holes in aluminum castings, for transverse machining.

Days to Ship: 12 Day(s) or more
Thread Mills for Metric Internal Threads_MC-HLC

YAMAWA MFG

A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

Days to Ship: 16 Day(s) or more
Spiral Fluted Taps for Aluminum_AL+SP

YAMAWA MFG

A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

Days to Ship: 1 Day(s) or more
Plus Series Spiral Fluted Taps_+SP

YAMAWA MFG

A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).

Days to Ship: Same day or more
Spiral Pointed Taps_PO

YAMAWA MFG

A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.

Days to Ship: 1 Day(s) or more
Long Shank Hand Taps for Parallel Pipe Threads_LS-PS

YAMAWA MFG

The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.

Days to Ship: 8 Day(s) or more
Spiral Fluted Taps for High Carbon Steels_HC+SP

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Days to Ship: 12 Day(s) or more
Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.

Days to Ship: 16 Day(s) or more
HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D

YAMAWA MFG

Solid die for difficult-to-cut materials, such as stainless steel, etc.
[Features]
· Adopts high-speed tool steel (HSS).
· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
· Stable male threading can be performed.
· Solid type with minimal variation even under harsh cutting condition specifications.
[Applications]
· Optimal for machining stainless steel and other difficult-to-cut materials.

Days to Ship: 11 Day(s) or more
Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

YAMAWA MFG

5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.

Days to Ship: 20 Day(s) or more
Carbide Thread Mills for Metric Internal Threads_MC-CSLC

YAMAWA MFG

A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.

Days to Ship: 12 Day(s) or more
Carbide Taps for Light Alloys_N-CT-LA

YAMAWA MFG

A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.

Days to Ship: 11 Day(s) or more
Carbide Taps for Light Alloys_N-CT-FC

YAMAWA MFG

A carbide tap suitable for thread machining of hard and brittle material such as cast iron.

Days to Ship: 12 Day(s) or more
Carbide taps for ultra hard materials_UH-CT

YAMAWA MFG

[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Days to Ship: 12 Day(s) or more
Roll Taps for Non-Ferrous Materials_N+RS

YAMAWA MFG

A roll tap suitable for threading non-ferrous materials (aluminum casting, aluminum die casting, brass etc.).

Days to Ship: 8 Day(s) or more
Spiral Tap General Purpose Sewing Machines, (SM) Screw EX-SFT-SM

OSG

[Specifications]
· Shape: Spiral Tap
· Screw type: machine
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]

Days to Ship: 16 Day(s) or more
Grooveless Tap Series, X Performer Long Shank LT-S-XPF

OSG

[Specifications]
· Shape: Roll tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]

Days to Ship: 16 Day(s) or more
Threading Round Die Series Pipe General Threading Round Die RD-H

OSG

[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: HSS

Days to Ship: 16 Day(s) or more
I-Series Spiral Tap ISP Blister Pack Product

YAMAWA MFG

[Features]
· Low-speed machining tap for steel materials that can be used in hand-cranked and drilling machines.
[Applications]
· For blind hole machining.
· Work materials: Mild steel, such as SPC, SS400.
[Material]
· High-Speed Steel (HSS)

STOCK
Days to Ship: 1 Day(s) or more
Hand Tap (for Metric Screws / SKS)

TRUSCO NAKAYAMA

[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)

STOCK
Days to Ship: 1 Day(s)
I-Series Hand Tap IHT Blister Pack Product

YAMAWA MFG

[Features]
· Low-speed machining tap for steel materials that can be used in hand-cranked and drilling machines.
[Applications]
· Work materials: Mild steel, such as SPC, SS400.

STOCK
Days to Ship: 1 Day(s) or more
Thread Repair File

TSUBOSAN

[Features]
· One unit can be used for 8 pitch types.
· Stripped screw threads can be repaired.
[Applications]
· For when screw threads have been crushed at work sites.

Days to Ship: 16 Day(s) or more
Thread Repair Tool Set, Tap Die Set【14-59 Pieces Per Package】

LIGHTSEIKI

[Features]
· Perfect for a wide range of work as diverse sizes are included.
[Applications]
· Thread ridge repairs.
[Specifications]
· Machining thread: Metric thread.
· Tap grade: P3 grade.

STOCK
Days to Ship: 1 Day(s) or more
RENNSTEIG, Extractor Set (Square), 471-901-3【5 Pieces Per Package】

RENNSTEIG

[Features]
· An extractor that uses high-quality steel.
· Exhibits exceptional durability and high workability.
· 2-flute specification and tip center punching specification ensure firm holding of screws and bolts.
[Applications]
· For the extraction of things like bolts and pipes that had broken inside.

Days to Ship: 16 Day(s) or more
Hand Tap (SKS2) EA829DB-24C

ESCO

Materials: SKS_2 / JIS grade 3 / finishing tap / overall Length: 95 mm / width: 15 mm

Days to Ship: 17 Day(s) or more

Days to Ship:	15 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	1 Day(s)

Days to Ship:	1 Day(s)

Days to Ship:	1 Day(s)

Days to Ship:	1 Day(s)

Days to Ship:	1 Day(s)

Days to Ship:	17 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day

Days to Ship:	Same day or more

Days to Ship:	12 Day(s)

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	1 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	20 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	1 Day(s)

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	17 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)


Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	TRUSCO NAKAYAMA	SKC	SKC	SKC	SKC	ISHIHASHI	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	OSG	YAMAWA MFG	TRUSCO NAKAYAMA	YAMAWA MFG	TSUBOSAN	LIGHTSEIKI	RENNSTEIG	ESCO
Product Series	Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Pointed Tap for Difficult-To-Cut Materials CPM-POT	Taper Tap for Pipes V Coating, Powder HSS (for high hardness steel) V-XPM-TPT	Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT	CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT	Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS	MACHINING CENTER Tap (Normal Length)_EX-S-MCT	Epoch D Thread Mill EDT-□.□□-□□-TH	Hand Tap (for Metric Screws/HSS-E)	Round Die For Metric Screw	Hexagonal Re-threading Die (Metric Fine Screw)	Hexagonal Re-threading Die (Whitworth Screw)	Broken Tap Extractor (4 Claws)	Spiral Flute Tap (SKH)	Tire Valve Thread	Hand Tap, Product for DIY	Hand Tap, for Metric Fine Threads (Angle: 60°)	Spiral Tap / Drill Set【21 Pieces Per Package】	Spiral Tap for Blind Hole 1013	For Ultra Fast Tapping, Horizontal Use. Low Spiral Fluted Taps for Aluminum_HFASP	Thread Mills for Metric Internal Threads_MC-HLC	Spiral Fluted Taps for Aluminum_AL+SP	Plus Series Spiral Fluted Taps_+SP	Spiral Pointed Taps_PO	Long Shank Hand Taps for Parallel Pipe Threads_LS-PS	Spiral Fluted Taps for High Carbon Steels_HC+SP	Spiral Fluted Taps for High Carbon Steels, Oxidized_HC+SP-OX	HSS Round Dies for Auto Lathe, for Stainless Steel_HS-D	Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S	Carbide Thread Mills for Metric Internal Threads_MC-CSLC	Carbide Taps for Light Alloys_N-CT-LA	Carbide Taps for Light Alloys_N-CT-FC	Carbide taps for ultra hard materials_UH-CT	Roll Taps for Non-Ferrous Materials_N+RS	Spiral Tap General Purpose Sewing Machines, (SM) Screw EX-SFT-SM	Grooveless Tap Series, X Performer Long Shank LT-S-XPF	Threading Round Die Series Pipe General Threading Round Die RD-H	I-Series Spiral Tap ISP Blister Pack Product	Hand Tap (for Metric Screws / SKS)	I-Series Hand Tap IHT Blister Pack Product	Thread Repair File	Thread Repair Tool Set, Tap Die Set【14-59 Pieces Per Package】	RENNSTEIG, Extractor Set (Square), 471-901-3【5 Pieces Per Package】	Hand Tap (SKS2) EA829DB-24C
Days to Ship	15 Day(s) or more	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	12 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	1 Day(s)	17 Day(s) or more	16 Day(s) or more	Same day	Same day or more	12 Day(s)	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	1 Day(s) or more	Same day or more	1 Day(s) or more	8 Day(s) or more	12 Day(s) or more	16 Day(s) or more	11 Day(s) or more	20 Day(s) or more	12 Day(s) or more	11 Day(s) or more	12 Day(s) or more	12 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	1 Day(s) or more	1 Day(s)	1 Day(s) or more	16 Day(s) or more	1 Day(s) or more	16 Day(s) or more	17 Day(s) or more
Specifications									STOCK	STOCK	STOCK	STOCK	STOCK						STOCK																				STOCK	STOCK	STOCK		STOCK
Screw size (Nominal)	-	M3 ～ M30	M1.4 ～ M14	R1 ～ R3/8	No.0UN ～ M20	No.2UN ～ M6	M1 ～ M2.3	M8	M4 ～ M12	M3 ～ M16	M2 ～ M30	M8 ～ M36	W1 ～ W9/16	-	W1 ～ M48	TV8	M5	M10 ～ M13	-	M2 ～ M20	M6 ～ M20	1015 ～ 32506N300M	M2 ～ M24	M2 ～ M6	No.10 ～ M18	1/2 ～ 1/4	1/2W12 ～ M30	M3 ～ M16	M1 ～ M10	No.10 ～ M12	06510X28R ～ 200505N300M	M1.4 ～ M20	No.10-32UNF ～ M24	M2 ～ M20	M2 ～ M8	SM1/4 ～ SM15/64	M3 ～ M12	W1 ～ M25	M3 ～ M10	M12 ～ M30	M3 ～ M10	-	-	-	-
Screw Types	Meter	Meter	Meter	Taper for Pipe	Meter / unified	Meter / unified	Meter	Meter	Meter	Meter	Meter	-	Whitworth	-	Meter / Whitworth	-	Meter	Meter	-	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter / unified / Whitworth	Parallel for Pipes	Meter / Whitworth	Meter	Meter	Meter / unified	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter / unified	Meter	Meter	Sewing Machine	Meter	Meter / Whitworth	Meter	Meter	Meter	-	-	-	-
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	High Hardness Steel (50-60 HRC)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○]	-	-	-	-
Pitch (P), Number of Threading(mm)	0.5 ～ 3	0.5 ～ 3.5	0.3 ～ 2	11 ～ 28	0.25 ～ 80	0.25 ～ 56	0.25 ～ 0.4	1.25	0.7 ～ 1.75	0.5 ～ 2	0.4 ～ 2	0.75 ～ 2	8 ～ 40	-	0.5 ～ 20	32	0.8	0.5 ～ 1	-	0.4 ～ 2.5	1 ～ 1.75	-	0.4 ～ 3	0.4 ～ 1	0.3 ～ 40	14 ～ 19	0.5 ～ 3	0.5 ～ 2	0.25 ～ 1.5	0.35 ～ 64	0.5 ～ 3	0.3 ～ 2.5	0.3 ～ 3	0.4 ～ 2.5	0.4 ～ 1.25	20 ～ 56	0.5 ～ 1.75	0.35 ～ 40	0.5 ～ 1.5	1.25 ～ 3.5	0.5 ～ 1.5	0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00 ～ 10、11、12、14、16、18、20、24F	-	-	-
Tool Material Type	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Alloy HSS	Alloy HSS	Alloy HSS	-	-	High-speed steel	-	-	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	Carbide	Carbide	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	SKS	High-speed steel	-	-	-	-
Tap Type	Thread cutter	Point tap	Point tap	Tap for pipes	Roll tap	Roll tap	Roll tap	Thread-cutting-related tool	Thread cutter	Hand Tap	Die	Die	Die	Modification/removal Tool	Spiral Tap	Point tap	Hand Tap	Hand Tap	Thread-cutting-related tool	Spiral Tap	Spiral Tap	Thread cutter	Spiral Tap	Spiral Tap	Point tap	Tap for pipes	Spiral Tap	Spiral Tap	Die	Thread-cutting-related tool	Thread cutter	Hand Tap	Hand Tap	Point tap	Roll tap	Spiral Tap	Roll tap	Die	Spiral Tap	Hand Tap	Hand Tap	Modification/removal Tool	Oil Hole Tap	Modification/removal Tool	-
Hole type	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	-	-	-	-	-	For blind hole	-	-	-	For blind hole	For through hole / For blind hole	-	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	-	For blind hole	-	For through hole / For blind hole	-	-	-	-
Chamfer threads (Lcf)	-	6P	5P	3P	2P ～ 4P	1P	2P	3P	-	1.5P ～ 9P	-	-	-	-	-	-	5P	5P	-	-	2.5P	-	2.5P	2.5P	5P	3.5P	2.5P	2.5P	-	-	-	1.5P ～ 5P	1.5P ～ 3P	5P	2P ～ 4P	2.5P	-	-	2.5P	-	2P ～ 5P	-	-	-	-
Coating Type	TiAlN	TiN	Non-Coated	TiCN	TiN	TiCN	TiCN	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	-	-	-	-	-	Non-Coated	-	-	Non-Coated	TiN	TiCN	TiN	-	-	-	-	-	-	-	-	TiAlN	-	-	TiAlN	-	Non-Coated	Other	Non-Coated	-	Non-Coated	-	-	-	-	-
Coating Y/N	Available	Available	NA	Available	Available	Available	Available	NA	Available	NA	-	-	-	-	-	NA	-	-	NA	Available	Available	Available	NA	NA	NA	NA	NA	NA	NA	NA	Available	NA	NA	Available	NA	NA	Available	NA	NA	NA	NA	-	-	-	-
Overall Length (L)(mm)	60 ～ 120	100 ～ 200	34 ～ 88	59 ～ 109	30 ～ 105	30 ～ 62	30 ～ 42	70	50 ～ 80	46 ～ 95	-	-	-	-	-	70	-	-	-	40 ～ 105	62 ～ 105	70 ～ 200	42 ～ 135	42 ～ 62	36 ～ 100	100 ～ 150	46 ～ 135	46 ～ 95	-	41.5 ～ 121	50 ～ 140	34 ～ 105	34 ～ 120	40 ～ 105	42 ～ 70	42 ～ 65	80 ～ 150	-	46 ～ 75	80 ～ 135	46 ～ 75	230	-	-	-