(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Thread-Cutting-Related Tools

Threading-related tools are a variety of useful tools used when setting up screws, excluding typical taps and dies. Drill tap with integrated drill and tap, and female thread is set at a time even when there is no pilot hole, enabling high-efficiency work. A tap / drill bit set with a drill bit set for pilot holes attached to the tap set. A check pin dedicated to pilot holes that can easily and accurately inspect the pilot hole diameter of the screw and reduce defects in female thread processing. The lineup includes a magnet tapper that can be fixed with a magnet and tapped vertically, and that can prevent twisting bending and breakage. There are a wide variety of specifications for screws, so select a screw standard, thread diameter, and ridge pitch according to the processing purpose.
Days to Ship
  • All
  • 1 Day(s) or Less
  • 8 Day(s) or Less
  • 12 Day(s) or Less
  • 20 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Hand Tap / Drill Set

      Hexagonal Shaft Tap (for Through Hole)

        MACHINING CENTER Tap (Normal Length)_EX-S-MCT

          MACHINING CENTER Tap with Long Shank_EX-MCT

            Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)

              Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)

                Hexagonal Shaft Tapping Drill

                  Electro plated Diamond Tap for Ceramics_ED-PNT

                    Tire Valve Thread

                      Cobalt jet/spiral type/drill set

                        Cobalt spiral type/drill set

                          Spiral Tap / Drill Set for Electric Construction

                            Mid Tap / Drill Set for Electric Construction

                              Spiral Tap / Drill Set

                                Jet/spiral tap/drill set

                                  Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

                                    Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T

                                      Magnet Tapper

                                        Tap pilot hole drill set

                                          Union Tool Screw Cutting Tool

                                            Mag Tap 3–12 mm

                                              Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

                                                Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

                                                  Shank Adjusters_SA

                                                  Brand

                                                  ISHIHASHI

                                                  ONISHI MANUFACTURING

                                                  OSG

                                                  OSG

                                                  ONISHI MANUFACTURING

                                                  ONISHI MANUFACTURING

                                                  ONISHI MANUFACTURING

                                                  OSG

                                                  SKC

                                                  ISHIHASHI

                                                  ISHIHASHI

                                                  ISHIHASHI

                                                  ISHIHASHI

                                                  ISHIHASHI

                                                  ISHIHASHI

                                                  YAMAWA MFG

                                                  YAMAWA MFG

                                                  NEW STRONG

                                                  HITACHIKOKI

                                                  UNION TOOL

                                                  KANETEC

                                                  YAMAWA MFG

                                                  YAMAWA MFG

                                                  YAMAWA MFG

                                                  Product Series

                                                  Hand Tap / Drill Set【21 Pieces Per Package】

                                                  Hexagonal Shaft Tap (for Through Hole)【1-3 Pieces Per Package】

                                                  MACHINING CENTER Tap (Normal Length)_EX-S-MCT

                                                  MACHINING CENTER Tap with Long Shank_EX-MCT

                                                  Hexagonal Shaft Point Tap for Stainless Steel (for Through Hole)

                                                  Hexagonal Shaft Spiral Tap (for Through Hole / Blind Hole)

                                                  Hexagonal Shaft Tapping Drill

                                                  Electro plated Diamond Tap for Ceramics_ED-PNT

                                                  Tire Valve Thread

                                                  Cobalt jet/spiral type/drill set【21 Pieces Per Package】

                                                  Cobalt spiral type/drill set【21 Pieces Per Package】

                                                  Spiral Tap / Drill Set for Electric Construction【26 Pieces Per Package】

                                                  Mid Tap / Drill Set for Electric Construction【26 Pieces Per Package】

                                                  Spiral Tap / Drill Set【21 Pieces Per Package】

                                                  Jet/spiral tap/drill set【21 Pieces Per Package】

                                                  Check Pins for Bored Hole in Thread Cut Tapping (Straight Type)_CPC-S

                                                  Check Pins for Bored Holes in Thread Cut Tapping (Taper Type)_CPC-T

                                                  Magnet Tapper

                                                  Tap pilot hole drill set【2 Pieces Per Package】

                                                  Union Tool Screw Cutting Tool

                                                  Mag Tap 3–12 mm

                                                  Check Pins for Bored Hole in Thread Form Tapping (Straight Type)_CPR-S

                                                  Check Pins for Bored Holes in Thread Form Tapping (Taper Type)_CPR-T

                                                  Shank Adjusters_SA

                                                  Days to Ship 1 Day(s) 8 Day(s) 12 Day(s) or more 12 Day(s) or more 1 Day(s) or more 1 Day(s) 8 Day(s) 12 Day(s) or more 12 Day(s) or more 1 Day(s) 8 Day(s) 1 Day(s) 1 Day(s) 1 Day(s) 8 Day(s) 20 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) 12 Day(s) 12 Day(s) or more Quote Quote 8 Day(s) or more
                                                  Specifications
                                                  • STOCK
                                                        • STOCK
                                                                • STOCK
                                                                  • STOCK
                                                                  • STOCK
                                                                  • STOCK
                                                                                      Screw size (Nominal)-M3 ~ M8M8M10 ~ M12M3 ~ M10M3 ~ M10M3 ~ M6-TV8------No.10 ~ M12M2 ~ M12--M2 ~ M8-No.10 ~ M12No.10 ~ M12M3 ~ M10
                                                                                      Screw Types-MeterMeterMeterMeterMeterMeterOther-MeterMeter----Meter / unifiedMeter-Meter--Meter / unifiedMeter / unifiedMeter
                                                                                      work material-Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Stainless steel (SUS)[○] / Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]Steel casting (SC)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]-Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]---------------
                                                                                      Pitch (P), Number of Threading(mm)-0.5 ~ 1.251.251.50.5 ~ 1.50.5 ~ 1.50.5 ~ 10.5 ~ 232------0.35 ~ 640.4 ~ 1.75--0.4 ~ 1.25-0.4 ~ 640.4 ~ 64150
                                                                                      Tool Material Type-High-speed steelVanadium High-Speed SteelVanadium High-Speed SteelHigh-speed steelHigh-speed steelHigh-speed steel-High-speed steelCobalt HSSCobalt HSS--High-speed steelHigh-speed steelHigh-speed steelHigh-speed steel----High-speed steelHigh-speed steel-
                                                                                      Tap TypeThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolPoint tapThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related tool-Thread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related toolThread-cutting-related tool
                                                                                      Hole type-For through holeFor through hole / For blind holeFor through hole / For blind holeFor through holeFor through hole / For blind holeFor through hole-For blind hole------For through hole / For blind hole-----For blind holeFor through hole / For blind hole-
                                                                                      Chamfer threads (Lcf)--3P3P--------------------
                                                                                      Coating TypeNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiNNon-CoatedNon-Coated-Non-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated----Other-Non-CoatedNon-CoatedNon-Coated
                                                                                      Coating Y/NNANANANAAvailableNANA-NANANANANANANANANA--Available-NANANA
                                                                                      Overall Length (L)(mm)-70 ~ 70/70/7070150707066 ~ 6950 ~ 8070------41.5 ~ 12142 ~ 110-103 ~ 11350 ~ 60-41.5 ~ 12159.5 ~ 61.5103 ~ 127

                                                                                      Loading...

                                                                                      1. 1

                                                                                      Related Categories to Thread-Cutting-Related Tools