Woodworking Drill Cutters

• 

  Flexible Groove Cutter AJ120 Series

  DAINISHO

  Functional economical version. 24-flute / Single-side polished
  
  [Features]
  · For grooving, rabbeting, etc. By turning the dial, machining is possible as desired.
  · Because the groove width can be flexibly changed by just turning the dial, there is no need for a lineup of cutters with a variety of blades.
  · The large number of blades means that polyvinyl plywood and decorative boards rarely nap up.

  Days to Ship:	19 Day(s) or more

• 

  Flexible Groove Cutter AJ120W21 Series

  DAINISHO

  Functional economical version. 30-flute / Double-side polished. It has 18 mm width and a flat bottom.
  
  [Features]
  · For grooving, rabbeting, etc. By turning the dial, machining is possible as desired.
  · Because the groove width can be flexibly changed by just turning the dial, there is no need for a lineup of cutters with a variety of blades.
  · The large number of blades means that polyvinyl plywood and decorative boards rarely nap up.

  Days to Ship:	16 Day(s) or more

• 

  Impact Bit, Middle

  STAR-M

  [Features]
  · Drilling holes in general wood materials using an impact screwdriver - Middle

  Days to Ship:	12 Day(s) or more

• 

  Short Bit

  STAR-M

  [Features]
  For drilling shallow through-holes

  Days to Ship:	12 Day(s) or more

• 

  Drill for bamboo

  STAR-M

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Long Drill Full length L500

  ONISHI MANUFACTURING

  [Features]
  · For through holes in wood.
  · A drilling tool for deep hole drilling in wood.
  [Applications]
  · Work material: Wood.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Woodworking Drill Bit, Ultra-Hard Straight Bit

  DAINISHO

  [Features]
  - For drilling, grooving, cutting, and as the tip of a stair ruler.
  ・The high-speed rotating blade allows for a very clean finish on woodwork and the bottom surface.
  ・Useful as the cutting edge of each manufacturer's graded ruler.
  ・Hinge bit 6 x 8 x 35 ideal for one-shot processing of hinge drilling.

  Days to Ship:	12 Day(s) or more

• 

  Drill Bit

  STAR-M

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hexagonal Shank Drill Saw

  STAR-M

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hexagonal Shaft Brad-Point Bit / Wooden Dowel

  ONISHI MANUFACTURING

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Short Twisted Ring Auger

  ONISHI MANUFACTURING

  [Features]
  · For through holes in wood.
  · Drill using hand crank (manual) to drill holes in wood materials.
  · Drilling work is possible in locations that lack power.
  [Applications]
  · Work material: Wood.

  Days to Ship:	16 Day(s) or more

• 

  Drill Holder

  STAR-M

  [Features]
  · Completely stores gimlet bits for ironwork drills, pilot hole gimlets, etc.
  · Relax; it won't poke into your leg.
  · It does not scratch the cosmetic material.
  [Compatibility]
  · 6.35 Hexagonal Shaft Drill with 7 mm Drill Diameter and Up to 125 mm Total Length

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, roundover surface

  DAINISHO

  A lightweight, rigid plastic board with a 3-layer structure that sandwiches air.
  
  [Features]
  · For decorative surface/chamfering/joining.

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, beading surface

  DAINISHO

  Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).
  
  [Features]
  · For decorative surface/chamfering/joining.

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, ogee surface

  DAINISHO

  [Features]
  · Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, cove surface

  DAINISHO

  [Features]
  · Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, 2-stepped cove surface

  DAINISHO

  [Features]
  · Blade for decorative surfaces and chamfering of wood materials and resin materials (artificial marble).

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, corner surface

  DAINISHO

  [Features]
  · For Decola and veneer chamfering.

  Days to Ship:	12 Day(s) or more

• 

  Corner bit, chamfering w/ mushroom

  DAINISHO

  [Features]
  · For Decola and veneer chamfering.
  · Included flange provides longer bearing service life.

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, dovetail

  DAINISHO

  [Features]
  · Assembled without nails.

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, horizontal groove bit

  DAINISHO

  [Features]
  · For groove machining of window frames and wooden flooring.
  · Ideal for glass grooves and board grooves in fixtures and furniture.
  · The bearings serve as guides when grooving the rounded part of the arch, making grooving easy.
  · Capable of grooving with the frame assembled when increasing the groove width (when replacing glass or plywood with a heavy material, etc.).
  · Grooving of flooring is possible in combination with jointing male bits (4.5 x 6.5 or 6 x 8).

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, grafting male bit

  DAINISHO

  [Features]
  ·Easy and clean chamfering is possible with the carbide tip
  ·The bearing serves as a guide, allowing free chamfering of curves, straight lines, inside, outside, and corners
  [Applications]
  ·Male processing of flooring

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, joint removal

  DAINISHO

  [Features]
  ・Anyone can easily chamfer Decora, plywood, wood, plastic, artificial marble, etc., and the finished product is beautiful.
  ・Bearings serve as guides for curves, straight lines, inside, outside, and corners. You can freely chamfer
  ・Please select the most suitable blade according to the processing purpose
  [Applications]
  ・Work material: wood
  ・Chamfering, joint cleaning, cutting out, hole drilling , for various work such as ant (male and female) processing.

  Days to Ship:	16 Day(s) or more

• 

  Corner bit, straight w/ guide bearing

  DAINISHO

  [Features]
  ・Anyone can easily chamfer Decora, plywood, wood, plastic, artificial marble, etc., and the finished product is beautiful.
  ・Bearings serve as guides for curves, straight lines, inside, outside, and corners. You can freely chamfer
  ・Please select the most suitable blade according to the processing purpose
  [Applications]
  ・Work material: wood
  ・Chamfering, joint cleaning, cutting out, hole drilling , for various work such as ant (male and female) processing.

  Days to Ship:	16 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard Slit Straight Bit

  DAINISHO

  [Features]
  · Solid carbide, break-resistant.
  · Made from solid carbide, making it more rigid and break-resistant than a carbide straight bit.
  · Ideal for thin grooving and cutting out.

  Days to Ship:	12 Day(s) or more

• 

  Woodworking Drill Bit, V Channel Bit

  DAINISHO

  [Features]
  · For lettering and decorative engraving.

  Days to Ship:	16 Day(s) or more

• 

  Woodworking Bit, Baseboard Bit 6X46°

  DAINISHO

  [Features]
  · Safely measures the out-angle.

  Days to Ship:	16 Day(s) or more

• 

  Woodworking Drill Bit, U Channel Bit

  DAINISHO

  [Features]
  · For slip prevention on sliding door grooves and stairs.

  Days to Ship:	16 Day(s) or more

• 

  Woodworking Drill Bit, Strong 1 Stage (Single Surface) Flush Bit

  DAINISHO

  [Features]
  · Heavy duty cutting flush material.
  · Highly rigid HSS material is used in the base metal section, and the product also supports heavy cutting such as for 2 x 4 window cutting.
  · The tip blade is an HSS blade and the cutting-out blade is a carbide external blade to facilitate smooth discharge of chips. Operation is faster compared to conventional products.

  Days to Ship:	12 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard 1 Stage (Single Surface) Flush Bit

  DAINISHO

  [Features]
  · For cutting out single surfaces of veneer, boards, etc.
  · If the core material is thin, use 6 x 6 x G5 with narrow guide (G).

  Days to Ship:	12 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard 2 Stage (Double-sided) Flush Bit

  DAINISHO

  [Features]
  · Cuts 2 plates in a single action.
  · It can cut out 2 boards, such as doors, in one go.
  · If the core material is thin, use 12 x 12 x G5 with narrow guide (G).

  Days to Ship:	16 Day(s) or more

• 

  Woodworking Drill Bit, Ultra-Hard Tungsten Carbide

  DAINISHO

  [Features]
  · Enables joint processing for both male and female with 1 unit.
  · Use the accessory straight guide for the trimmer/router.

  Days to Ship:	16 Day(s) or more

• 

  Woodworking Drill Bit, Easy Nick Bit

  DAINISHO

  [Features]
  · Cut particle board and thick plywood in two with the single-sided nick blade (rough cut type).
  · Using the single-sided nick blade enables difficult-to-cut materials, such as particle board, plywood and laminated wood, to be drilled precisely and with a light touch.
  · Excellent scrap discharge enables quiet cutting.

  Days to Ship:	16 Day(s) or more

• 

  Impact Bit, Short

  STAR-M

  [Features]
  Drilling holes in general wood materials using an impact screwdriver - Short

  Days to Ship:	12 Day(s)

• 

  Sanding Paper pilot hole drill

  STAR-M

  [Features]
  Drill pilot holes before nailing to prevent siding from cracking.

  Days to Ship:	8 Day(s) or more

• 

  Dowel Cone

  STAR-M

  [Features]
  Drilling for Dowel Hole

  Days to Ship:	12 Day(s)

• 

  HSS Drill Bits - M【1-3 Pieces Per Package】

  STAR-M

  [Features]
  Drill pilot holes before screw-fastening or nailing to prevent wood from cracking.

  Days to Ship:	12 Day(s)

• 

  HSS Hexagonal Shaft Chamfer Cutter 90°

  STAR-M

  [Features]
  Chamfering and deburring after drilling

  Days to Ship:	16 Day(s) or more

• 

  Long S type temporary frame bit

  STAR-M

  [Features]
  For centering work performed during foundational construction of buildings. Ideal for drilling for separators.

  Days to Ship:	8 Day(s) or more

• 

  Long Drill 500L

  STAR-M

  [Features]
  For drilling holes of 240 mm or more depth

  Days to Ship:	12 Day(s)

• 

  Single action universal cone【1-2 Pieces Per Package】

  STAR-M

  This is a new type of adjustable circle cutter series that makes size matching easier.
  Twin-blade type with good balance and speed.
  For drilling holes in recessed lights, pipes, ducts, etc.

  Days to Ship:	12 Day(s)

• 

  Dual Purpose Bit

  STAR-M

  [Features]
  For drilling through holes

  Days to Ship:	12 Day(s) or more

• 

  Flexible Drill

  STAR-M

  [Features]
  Drilling Holes for Down Lights / Piping / Ducts, etc.

  Days to Ship:	Quote

• 

  Universal Auger for Chargeable Drill

  STAR-M

  [Features]
  Drilling Holes for Down Lights / Piping / Ducts, etc.

  Days to Ship:	12 Day(s)

• 

  Pre-Triangle Short Bit

  STAR-M

  [Features]
  For drilling shallow blind holes

  Days to Ship:	12 Day(s) or more

Loading...