Drills for Concrete

• 

  Non-Slip Drill BN Type (Straight Shank)

  UNIKA

  [Features]
  · The "slip-proof" engraving on the shank helps improve speed and durability.
  · Adopts a specially polished carbide tip that makes it possible to drill holes quickly in concrete with a high torque impact drill.
  [Applications]
  · Work materials: Concrete, blocks, brick, mortar, gypsum boards, ALC plates, etc.
  [Material]
  · Blade: Carbide tip

  Days to Ship:	12 Day(s) or more

• 

  Rechargeable Vibratory Drill Bit BJ Type

  UNIKA

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  VB Diamond Drill Water Injector

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Compact and lightweight. Easy to use. · Suction cup type that does not easily scratch tiles.
  · Can be used as a positioning guide at the start of drilling.
  · Water injection can be set to "open" or "closed".

  Days to Ship:	16 Day(s) or more

• 

  Hexagonal Shaft Drill for Concrete

  ONISHI MANUFACTURING

  [Features]
  A hexagonal shaft (6.35 mm) finish tool that can be mounted onto an impact driver with "one touch". The polished tip demonstrates superb sharpness.

  Days to Ship:	13 Day(s) or more

• 

  Anchor Drill ADX-SDS Type (SDS plus Shank)

  SANKO TECHNO

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Anchor Drill ADX2-HEX Type (Hexagonal Shaft)

  SANKO TECHNO

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Chip top bit (SDS-plus) TT type【1-5 Pieces Per Package】【1-5 Pieces Per Package】

  UNIKA

  for work Material Concrete, Block, Mortar, and Japanese Wall.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Serrated Shaft Concrete Drill (For Vibration)

  HOUSE BM

  [Features]
  · The shank has been machined for a serrated shaft finish and to prevent the chuck from slipping.
  · As the drill can be used to its fullest capacity, it provides both sharpness and durability at least 30% higher than conventional products.
  · With a serrated shaft preventing slippage, drilling hard material is now possible.

  Days to Ship:	8 Day(s) or more

• 

  Bit for Cement Extrusion-Molded Panels (for Rotating)

  HOUSE BM

  [Features]
  · For drilling extruded cement boards (ideal for drilling pilot holes for Z-clips).

  Days to Ship:	12 Day(s)

• 

  Concrete Drill (6.35 Hexagonal Axis)

  MAKITA

  [Features]
  · Makita genuine concrete drill.
  [Applications]
  · Work materials: Concrete, blocks, brick, mortar, etc.
  · For drilling holes in concrete, blocks, bricks, mortar, etc.
  [Material]
  · Blade: Carbide Tip

  Days to Ship:	12 Day(s)

• 

  Vibrating drill for concrete (S drill)

  MIYANAGA

  [Features]
  Efficient blade shape suited to use for vibration.

  Days to Ship:	Quote

• 

  All Drill SDS Type (SDSplus Shank)

  SANKO TECHNO

  [Features]
  · Lightweight hammer drill that can be attached and detached with one touch.
  · It efficiently transmits the drilling power to the cutting edge.
  [Applications]
  · Work materials: Concrete, blocks, mortar.

  Days to Ship:	13 Day(s) or more

• 

  Anchor Drill ADX2-MAX Type (SDS max Shank)

  SANKO TECHNO

  Higher speed drilling than those of conventional products is achieved by optimizing the designs of the blade tip and the spiral.
  

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Concrete Drill for Vibration Drill (Straight Shank)【1-5 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Achieves fantastic cutting quality by using an ultra-hard tip with excellent durability, and employing a specially designed blade tip shape and angle.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Concrete Drill (SDSplus Shank) for Small Capacity Hammer Drills【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · The carbide tip and cutting edge of the candle type have been made thin, allowing it to drill workpieces sharply and improving the drilling speed.
  · The center point at the end of the carbide tip exhibits excellent positioning performance to facilitate drilling that is close to a perfect circle.
  · Center point suppress core vibration during drilling to reduce vibration load during operation.
  [Applications]
  · Work materials: Concrete, blocks, mortar, Japanese walls.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Hex shaft rechargeable screwdriver bit (6.35 hex shaft)【1-3 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Use of 6.35 mm hexagonal shank improves torque transmission efficiency.
  · An integrated shape from the shank to blade tip for safety.
  [Applications]
  · Work materials: Block, mortar, brick, plasterboard, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Concrete Drill "SDS-Plus UX" (SDSplus Shank) for Small Capacity Hammer Drills

  TRUSCO NAKAYAMA

  [Features]
  · It can make a hole close to a perfect circle and makes inserting an anchor smooth.
  · The blade tip is a cross blade which can penetrate a deck plate.
  · The low-wear blade tips and outer diameter cross blades maintain stable hole boring and minimize pinching even when reinforced steel bar is struck.
  [Applications]
  · Work material: Deck plate + Concrete, Block, Brick, Mortar, Gypsum board, Marble.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Rechargeable Drill Bit for Porcelain Tile (6.35 Hexagonal Shaft)

  TRUSCO NAKAYAMA

  [Features]
  · Because a special carbide tip that maintains boring force is adopted, hard-to-cut materials can be bored steadily with sharp cutting quality.
  · When the cutting edge is cooled with water before boring, the edge has more cutting ability and durability.
  · An integrated shape from the shank to enable proper perforation without blade tip chattering.
  [Applications]
  · Work materials: Porcelain tiles, ceramic tiles, roof tiles, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  "Glass Drill" (Straight Shank)

  TRUSCO NAKAYAMA

  [Features]
  · Ideal for delicate drilling of difficult-to-cut materials such as glass and marble.
  [Applications]
  · Work materials: Glass, tile, marble, concrete, etc.

  Days to Ship:	1 Day(s)

• 

  SDS-Plus UX

  UNIKA

  [Features]
  · The blade tip is a cross blade which can penetrate a deck plate.
  · Can make a hole close to a perfect circle, allowing anchors to be inserted smoothly.
  · The low-wear blade tips and outer diameter cross blades maintain stable hole boring and minimize biting even when reinforced steel bar is struck.

  Days to Ship:	12 Day(s) or more

• 

  Concrete Drill Bit Type B【1-5 Pieces Per Package】

  UNIKA

  [Features]
  · Abundant sizes support a wide range of work environment needs.
  · Achieves fantastic cutting quality by using a carbide tip with excellent durability, and employing a specially designed blade tip shape and angle.
  · SKS material (alloy tool steel) with excellent rigidity and impact resistance is selected for cutting edges with diameters: 5.0 mm or less. Suppresses breaking and bending of the drill to the minimum.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Drill Bit for Porcelain Tile, TR Type

  UNIKA

  [Features]
  · Ideal for drilling holes into 10 to 15 porcelain tiles at once.
  · A special carbide tip that maintains boring force is adopted. High sharpness allows reliable punching even of difficult-to-cut material.
  · By cooling the cutting edge with water when boring, even greater cutting performance and durability will be achieved.

  Days to Ship:	13 Day(s) or more

• 

  Rechargeable Impact Screwdriver Bit【1-5 Pieces Per Package】

  UNIKA

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Rechargeable Drill Bit for Porcelain Tile TJ Type

  UNIKA

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Drill Bit for Stone SB Type

  UNIKA

  [Features]
  · Outstanding sharpness and durability support materials from general stone to difficult-to-cut granite.
  · Provides effective power transmission due to the "slip-proof" engraving on the shank.
  · By cooling the cutting edge with water when boring, even greater cutting performance and durability will be achieved.

  Days to Ship:	13 Day(s) or more

• 

  Hex shaft bit HEX type

  UNIKA

  [Features]
  · Hammer drill dedicated bit that efficiently transmits striking torque without loss.
  · The integral design from the chuck part to the cutting edge makes it effective in through hole and deep hole machining.
  · Bits for drilling pilot holes for anchors or bits for stone (for slope construction) are also available.
  · Supports a wide range of work requirements. * Use the dedicated stone material type for drilling stone.
  · Applicable Motor: Hammer Drill

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Concrete diamond bit (hexagonal axis)

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · For anchoring and pilot holes in concrete (cannot bore reinforced steel) mortar, blocks, extrusion molding cement plates, bricks, and roof tiles.
  · A straightforward, easy, quiet drill bit that can drill holes with impact screwdrivers. A rotary dedicated type that is environmentally friendly and ideal for construction. Quiet and unlikely to scatter dust

  Days to Ship:	13 Day(s) or more

• 

  VB Diamond Drill (Hexagonal Shaft)

  SANKYO DIAMOND INDUSTRIAL

  [Features]
  · Applications: For drilling hard tiles, ceramic tiles, and stone tiles.
  · Less chipping for a more beautiful finish. 20 times carbide drills

  Days to Ship:	16 Day(s) or more

• 

  Concrete Drill (For both rotary and vibration)

  HOUSE BM

  [Features]
  · Rotation mode: For drilling mortar, ALC, Japanese style walls, ceramic siding, pottery tile, etc.
  · Impact mode: For drilling holes in concrete, blocks, brick, mortar, etc.

  Days to Ship:	11 Day(s) or more

• 

  Granite Drill (for Oscillation)

  HOUSE BM

  [Features]
  · For drilling work on stone, granite, PC boards, etc.

  Days to Ship:	Quote

• 

  Drill for Porcelain Tile / Roof Tile (for Rotation)

  HOUSE BM

  [Features]
  · As it can drill by rotation alone, cracking can be prevented.
  · Clean round holes can be drilled.
  · Special polished cutting edge enables direct hole drilling without center marking.
  · If the sharpness deteriorates after drilling tiles and the like, it can also be used for concrete.
  · 3 times higher drilling capacity with porcelain or roof tiles than when drilling with conventional concrete drills.
  · The ideal rpm for the electric drill is 800 to 1,200 per use.
  · Avoid continuous use. (After using 3 to 4 times continuously, stop once and cool using water.)
  · Press the electric drill forcefully when drilling. In addition, use a heavy object.

  Days to Ship:	12 Day(s) or more

• 

  Hex shaft bit J-type (rechargeable)

  HOUSE BM

  [Features]
  · With hexagonal shaft (subtense 6.35 mm), it can be directly mounted on rechargeable impact screwdrivers.
  · An integrated type with reduced flare and superior durability.

  Days to Ship:	12 Day(s) or more

• 

  Cushion Drill (for Concrete) Long Type

  VESSEL

  [Features]
  · For drilling mortar, block, brick, ALC, and gypsum board and drilling pilot holes for plugless screws and inserting plug anchors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  "Amera Drill AMD Type" (Straight Shank)

  SANKO TECHNO

  Special cutting edge shape that relieves stripping (chipping) for through holes. Enables smooth hole drilling work.

  Days to Ship:	12 Day(s)

• 

  Concrete Drill long life (straight shank)

  ALPEN

  [Features]
  · The carbide bit at the tip contributes to excellent bite performance and durability.
  · Has a particularly long operating life in concrete drilling.
  [Applications]
  · Work materials: Concrete, brick, admixtures, natural stone, etc.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Multi-Cut Drill (6.35 Hexagonal Shaft)

  ALPEN

  [Features]
  · This "all-rounder" drill enables drilling holes in a variety of materials with 1 unit.
  [Applications]
  · Work materials: Tile, brick, wood, stone, iron, plastic, etc.

  Days to Ship:	12 Day(s) or more

• 

  Granite/Marble Drill "Granite" (Straight Shank)

  ALPEN

  [Features]
  · The optimal cutting edge and spiral shape provide a long product life even when drilling high-hardness granite and marble.
  [Applications]
  · Work materials: Granite, marble, etc.

  Days to Ship:	16 Day(s) or more

• 

  High Accuracy Beton Concrete Drill (6.35 Hexagonal Shaft)

  ALPEN

  [Features]
  · Extremely durable with a with a superior tip end shape that enables sustained high-precision drilling.
  · Ideal when high precision pilot hole drilling in concrete, etc. is required.
  [Applications]
  · Work materials: Concrete, brick, admixtures, natural stone, etc.

  Days to Ship:	12 Day(s) or more

• 

  High Accuracy Beton Concrete Drill (Straight Shank)

  ALPEN

  Days to Ship:	12 Day(s)

• 

  Porcelain Tile Drill Kera Model Extreme (Straight Shank)

  ALPEN

  [Features]
  · The special patented shape of the carbide blade tip enables fast and clean drilling of various tiles which are brittle and also extremely hard.
  · This stops cracks from developing on the underside of tiles that are particularly prone to this following drill piercing.
  · Continuous drilling is feasible without water, ensuring a long product life.
  [Applications]
  · Work materials: Stoneware tile, porcelain tile, earthenware tile, ceramic tile, glass, etc.

  Days to Ship:	16 Day(s) or more

• 

  Iron Core Concrete Drill F8 Extreme (SDS Plus Shank) Regular Type

  ALPEN

  [Features]
  · 4-flute carbide tip structure achieves optimum balance of core thickness and chip discharge performance.
  · Enables drilling as is of materials such as concrete reinforced with steel bars.
  [Applications]
  · Work materials: Reinforced concrete, granite, concrete, natural stone, etc.

  Days to Ship:	13 Day(s) or more

• 

  Iron Core Concrete Drill F8 Extreme (SDS Plus Shank) Long Type

  ALPEN

  [Features]
  · 4-flute carbide tip structure achieves optimum balance of core thickness and chip discharge performance.
  · Enables drilling as is of materials such as concrete reinforced with steel bars.
  [Applications]
  · Work materials: Reinforced concrete, granite, concrete, natural stone, etc.

  Days to Ship:	16 Day(s) or more

• 

  Drill Bit for Vibration B Type (Straight Shank) Set

  UNIKA

  [Features]
  · Achieves fantastic cutting quality by using an ultra-hard tip with excellent durability, and employing a specially designed blade tip shape and angle.
  [Applications]
  · Work materials: Concrete, blocks, marble, gypsum boards, tiles.
  [Set Contents]
  · 3.2, 3.5, 4.3, 4.5, 4.8, 5.0 mm (total length 85 mm) x 1 pc each
  · 6.0, 6.4 mm (total length 100 mm) 1 pc each
  · 8.0, 8.5 mm (total length 125 mm) 1 pc each

  Days to Ship:	12 Day(s)

• 

  Non-Slip Drill BN Type (Straight Shank) Same Size 5 Pc Set

  UNIKA

  [Features]
  · The "slip-proof" engraving on the shank helps improve speed and durability.
  · Adopts a specially polished carbide tip that makes it possible to drill holes quickly in concrete with a high torque impact drill.
  [Applications]
  · Work materials: Concrete, blocks, brick, mortar, gypsum boards, ALC plates, etc.
  [Material]
  · Blade: Carbide tip

  Days to Ship:	13 Day(s) or more

• 

  Porcelain Tile Bit

  BOSCH

  [Features]
  · Enables high durability and quick hole drilling due to the seven-sided polished tip.
  [Applications]
  · For drilling porcelain, ceramic tiles, and roof tiles.
  [Material]
  · Blade: Carbide Tip

  Days to Ship:	13 Day(s) or more

Loading...