Tooling-Related Equipment（Product Category：Attachments/Accessories）

• 

  F Type, Cutout Type Insert Bushing

  NT TOOL

  [Applications]
  · Cutout type insert bushing is used frequently when making the same product in a large quantity or for a long period of time.
  

  Days to Ship:	10 Day(s) or more

• 

  Mega Wrench (Mega Chuck Series)

  BIG DAISHOWA SEIKI

  [Features]
  · The one-direction clutch system allows nuts to be tightened uniformly around the whole circumference.
  · It eliminates the risk of the wrench coming off during work, so work can be done securely.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Pull stud JBS/MAS standard

  YUKIWA SEIKO

  ·JBS and MAS standard pull studs.
  ·The shape of the pull stud is manufactured according to JIS and MAS standards.
  Special sizes other than those listed above can be manufactured.

  Days to Ship:	14 Day(s) or more

• 

  SEC-Cartridge Unit, BU Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  BU type cartridge unit with a minimum machining diameter of 24 to 60.

  Days to Ship:	10 Day(s) or more

• 

  Rotary Table (Vertical Use)

  TRUSCO NAKAYAMA

  [Features]
  · It is ideal for cutting arcs, drilling, countersinking, etc. when mounted on the table, and can also be used vertically.
  · A single rotation of the handle rotates the table 4 times.
  [Applications]
  · For an accurate angle calculation.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pull Stud Bolt

  SHOWA TOOL

  Widely supports 49 machine tool manufacturers

  Days to Ship:	14 Day(s) or more

• 

  SEC-Cartridge Unit, P24 Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  P24 Type cartridge unit with a minimum machining diameter of 24 and 38.

  Days to Ship:	12 Day(s) or more

• 

  T-Slot Clean

  BIG DAISHOWA SEIKI

  [Features]
  · Set to the groove of a machine table to prevent cutting chips clogging the groove
  · Table surface can be made even by filling in the grooves, and cutting chips can be easily cleaned up
  · Grooves can be prepared in 3 different widths to match the machine table. (Groove widths 14/18/22 mm)
  · Changeover Time Significantly Shortened

  Days to Ship:	1 Day(s)

• 

  Drill Sleeve [for Morse Taper]

  TRUSCO NAKAYAMA

  [Features]
  · Use when making the drill or reamer Morse taper size smaller. (Such as when aligning to the spindle taper size of the drilling machine being used)

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Tooling mate

  BIG DAISHOWA SEIKI

  [Features]
  It is a tooling mate that comes with 1 adapter.
  [Applications]
  Ideal for attaching and removing pull bolts and cutting tools.

  Days to Ship:	12 Day(s) or more

• 

  Pull Stud (with center hole)

  YUKIWA SEIKO

  Pull stud dedicated for center through type machining center.
  
  [Features]
  · Pull stud dedicated for center through type machining center

  Days to Ship:	16 Day(s) or more

• 

  Chuck Wrench

  SHOWA TOOL

  Suited to Various Chucks for Tool Tightening

  Days to Ship:	14 Day(s) or more

• 

  SEC-Cartridge Unit, PN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  PN Type cartridge unit with a minimum machining diameter of 38 to 70.

  Days to Ship:	10 Day(s) or more

• 

  Spindle Cleaner

  BIG DAISHOWA SEIKI

  [Features]
  · Cleaner that completely removes dirt on machine spindles and holder bores

  Days to Ship:	1 Day(s) or more

• 

  New Baby Wrench (for New Baby Chucks)

  BIG DAISHOWA SEIKI

  [Features]
  ·A dedicated wrench with a length and hook designed to provide the optimum tightening force for the New Baby Chuck.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Manual Type Index Heads

  YUKIWA SEIKO

  High accuracy, speedy with one-touch method.
  It strongly supports labor-saving work.
  [Features]
  ·Used on milling machines, drilling machines, and slotters, it can easily improve the efficiency of angle indexing work for cut workpieces, contributing greatly to labor-saving and rationalization of production systems.
  ·"Unclamping" → "Indexing" → "Clamping" can be automatically performed with one-touch operation by moving the lever of the manual indexing table back and forth with one hand.
  ·The clamp is extremely strong and the indexing accuracy is precise.
  ·The maximum number of divisions is 24, and the division position can be selected by flipping the "select pin" on the side of the table.
  ·The indexing position can be changed quickly and easily.

  Days to Ship:	16 Day(s) or more

• 

  Side Spindle

  YUKIWA SEIKO

  [Features]
  · Use side spindle SS series to support one end of the jig when performing multi-surface machining with a C-type jig.

  Days to Ship:	16 Day(s) or more

• 

  Lock Nut

  YUKIWA SEIKO

  [Features]
  This product pursues high performance and high quality.
  ·Compatible collets: SG6,SG8,SG10,SG12,SG16,SG20,SG25,SG32
  ·Compatible wrenches: FS20,FS26,FS33,FS36,FS42,FS50,FS62,FS76

  Days to Ship:	14 Day(s) or more

• 

  Tool clamp

  YUKIWA SEIKO

  [Features]
  Special accessory for HSK holder
  Main body can be fixed vertically or horizontally.

  Days to Ship:	16 Day(s) or more

• 

  Wrench

  YUKIWA SEIKO

  [Features]
  9 types of wrenched for EY tool holders.
  ·Type: EFS,EKS

  Days to Ship:	16 Day(s) or more

• 

  Rotary Table Flange Bolt and Nut Set

  TRUSCO NAKAYAMA

  For scroll chucks compatible with front mounting.

  Days to Ship:	12 Day(s)

• 

  Chuck Wrench (Micron Chuck)

  SHOWA TOOL

  [Features]
  Accessories for Micron chuck, H series, M series

  Days to Ship:	18 Day(s) or more

• 

  SEC-Microunit, MUP Type

  SUMITOMO ELECTRIC HARDMETAL

  SEC series micro unit.
  There are several types depending on the minimum machining diameter and the cutting direction.

  Days to Ship:	16 Day(s) or more

• 

  Center through coolant nut (single piece)

  MANYO TOOLS

  [Features]
  · Use the replacement nut and sealing disc for reliable center-through operation

  Days to Ship:	12 Day(s) or more

• 

  S Shaft Chuck Arbor

  TAKURA KOGU

  [Features]
  Hardening and ground S-axis chuck arbor.
  Because it is hardening and ground product, it has excellent runout accuracy and taper contact, as well as excellent durability.

  Days to Ship:	10 Day(s) or more

• 

  Tongue piece

  TAKURA KOGU

  [Features]
  ·Screw that converts the drawing threaded type of MT/BS into TANG type.
  Minimum order quantity: 1 pc.

  Days to Ship:	10 Day(s) or more

• 

  α Taper Cleaner

  BIG DAISHOWA SEIKI

  [Features]
  · Removes particles and oil from the chuck bore taper.

  Days to Ship:	12 Day(s) or more

• 

  Adjustment Screw

  BIG DAISHOWA SEIKI

  [Features]
  Adjusting screw for Mega New Baby Chuck, Mega E Chuck and New Baby Chuck.
  [Applications]
  Ideal for adjusting tool runout length of tools.

  Days to Ship:	8 Day(s) or more

• 

  Mega Nut

  BIG DAISHOWA SEIKI

  [Features]
  Standard type mega nut for mega new baby chuck.
  High-precision nut that prevents coolant from entering and has excellent seal performance.

  Days to Ship:	12 Day(s) or more

• 

  Manual-type Tailstock

  YUKIWA SEIKO

  The pneumatic tailstock TSA/TSB series is a manual type basic tailstock (press cup). For machining 60°center holes close to the end face of a workpiece.

  Days to Ship:	16 Day(s) or more

• 

  YUKIWA SEIKS Spring Collet

  YUKIWA SEIKO

  [Features]
  · The spring collet YSS series easily and accurately chucks round workpieces in machining that uses a circular table or indexing table.

  Days to Ship:	16 Day(s) or more

• 

  Coolant Seal Screw

  YUKIWA SEIKO

  For Super G1 Chuck
  
  [Features]
  · Supports high pressure coolant with a coolant seal screw as part of the set

  Days to Ship:	14 Day(s) or more

• 

  Chuck Handle

  YUKIWA SEIKO

  for drill chucks.
  
  [Features]
  ·The quality of a drill chuck is determined by factors such as core run-out accuracy, "grasping power" to grip the drill, and "durability" to maintain accuracy.
  ·Runout precision: We ensure a high accuracy that exceeds the run-out accuracy of the JIS standard.
  ·Gripping force: Outstanding technology and strict quality control ensure a stable and strong gripping force.
  ·endurance: Appropriate heat treatment provides excellent wear resistance and maintains accuracy for a long time.
  ·jacob stever hole: Since the taper hole is finished by grinding, the taper contact amount is extremely large and there is no slippage.

  • STOCK

  Days to Ship:	Same day or more

• 

  Wrench with Torque Limiter

  YUKIWA SEIKO

  Since the recommended torque has been set, lock nuts will not be overtightened.

  Days to Ship:	16 Day(s) or more

• 

  Vertical Rotary Table (Vertical and Horizontal Type)

  NEW STRONG

  Vertical/Horizontal Alignment Table

  Days to Ship:	Quote

• 

  Divider

  NEW STRONG

  [Features]
  Divider that allows you to easily change angle by simply operating lever

  Days to Ship:	16 Day(s) or more

• 

  NEW STRONG Drill Drift

  NEW STRONG

  [Features]
  · The tip is fully heat treated and can withstand long-term use.
  · Since a spring is built into the grip, there is no effort wasted during work.

  Days to Ship:	16 Day(s) or more

• 

  SEC-Cartridge Unit, CE Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  CE Type cartridge unit with a minimum machining diameter of 30 to 70.

  Days to Ship:	16 Day(s) or more

• 

  SEC-Cartridge Unit, CP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  CP Type/CE Type cartridge unit with a minimum machining diameter of 30 to 70.

  Days to Ship:	16 Day(s) or more

• 

  SEC-Cartridge Unit, N38 Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  N38 Type cartridge unit with a minimum machining diameter of 24 and 38.

  Days to Ship:	10 Day(s) or more

• 

  SEC-Cartridge Unit, SP Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  SP/CE Type cartridge unit with a minimum machining diameter of 30 to 60.

  Days to Ship:	12 Day(s) or more

• 

  SEC-Microunit, MUN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]
  A micro unit with a minimum machining diameter of 36 to 73 mm and available in right and left hand.

  Days to Ship:	16 Day(s) or more

• 

  SEC-Microunit, NC Type

  SUMITOMO ELECTRIC HARDMETAL

  SEC series micro unit.
  There are 5 types depending on the minimum machining diameter.

  Days to Ship:	12 Day(s) or more

• 

  MMC Wrench

  MANYO TOOLS

  [Features]
  ·Compatible with MMC millmax milling chuck.
  [Product Type]
  ·Compatible chuck: MMC20
  ·Compatible chuck: MMC25
  ·Compatible chuck: MMC32
  ·Compatible chuck: MMC42

  Days to Ship:	12 Day(s) or more

• 

  Back-up Screw with Coolant Seal Pad

  MANYO TOOLS

  This is a coolant type adjustment thread part.
  Comes with a coolant seal pad.

  Days to Ship:	12 Day(s) or more

Loading...