Presetters

• 

  Level Master

  BIG DAISHOWA SEIKI

  [Features]
  · For level management of machine tools/precision assembly machinery
  · 2-axis simultaneous detection level
  · Alerts to completion of leveling operation with an LED and buzzer
  · Uses an optical level detection sensor
  · 2-axis simultaneous detection dramatically reduces cost and inspection time compared to conventional leveling work using 2 levels

  Days to Ship:	16 Day(s) or more

• 

  Reference Position Detection Bar Magic Center

  KASAHARA

  As it has a simple structure and measurement terminal that does not easily get magnetized, high measurement accuracy can be maintained for a long time. Measurement accuracy is within 2 microns

  Days to Ship:	12 Day(s) or more

• 

  Ceramic Centering Bar

  FUJI TOOL

  [Features]
  ·The ceramic stylus shields magnetism and prevents iron powder, drill powder, etc. from adhering. It also has excellent wear resistance.
  [Applications]
  ·For detecting the origin position of the X and Y axes of machine tools such as general-purpose machines, NC machines, and machining centers.

  • STOCK

  Days to Ship:	Same day or more

• 

  Accu Stand Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]
  · Straight shank type Accu-Stand. Ideal for aligning workpieces

  Days to Ship:	10 Day(s) or more

• 

  Accu Center (High-Precision Centering Bar)

  BIG DAISHOWA SEIKI

  [Features]
  · High-precision positioning done with a simple mechanical design. Measurements can be completed by simply attaching a probe to the end face of the workpiece.
  · Repeatability within 3 μ (vertical type).
  · A hard chrome plating of excellent durability has been adopted for the probe.

  Days to Ship:	Same day or more

• 

  Pace master

  BIG DAISHOWA SEIKI

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Z Block Presetter

  KASAHARA

  Measurement error is within 5 microns

  Days to Ship:	12 Day(s) or more

• 

  Tool Setter - Conductive Type / Magnetic Cable

  NISSIN SANGYO

  An ultra-precision tool setter with a detection accuracy of 1 µm.
  ·Minimum measuring tool diameter: ⌀1 mm
  ·LED: Red
  ·Repeatability: ±0.001 mm
  ·Weight: TOS50: 540 g, TOS100: 780 g
  ·Accessories: Lithium battery CR2032, 1 pc.

  Days to Ship:	17 Day(s) or more

• 

  Point Master Replacement Stylus

  BIG DAISHOWA SEIKI

  [Features]
  · Point Master replaceable stylus.
  · Stylus portion can be detached and an M3 screw-in type is used, meaning that the stylus can be replaced based on the workpiece shape should the stylus suffer damage

  Days to Ship:	16 Day(s) or more

• 

  Point Master (PMC Series/BT/BBT Shank Type)

  BIG DAISHOWA SEIKI

  [Features]
  · Instantly transmits touch position with LED lamp and buzzer.
  · Notifies reduction of battery life via flashing LED during workpiece measurement.
  · BT/BBT shank type.

  Days to Ship:	12 Day(s) or more

• 

  Point Master Pro

  BIG DAISHOWA SEIKI

  [Features]
  · Ideal for a high-speed machining center with ceramic bearings. Instantly detects the reference point even for non-conductive workpieces or machines

  Days to Ship:	12 Day(s) or more

• 

  NS Tool Setter / Magnet Cable

  NISSIN SANGYO

  For easy length measurement of tools mounted on machines. Significantly shortens the work time.
  
  [Features]
  · With sub-zero treatment and ultra-precision lapping in the block gauge production method to prevent secular gauge.
  · Used for both iron and non-ferrous metals (aluminum, copper, etc.) (use magnetic cable for plastics, wood molds, etc.).
  · It has movable width of 5 mm vertically and is not affected by a small amount of oil film.
  · The tool length can be directly input in offset

  Days to Ship:	12 Day(s) or more

• 

  CK Presetter

  BIG DAISHOWA SEIKI

  [Features]
  · Fully utilizes the advantages of a modular system.
  · Dedicated, low-cost presetter enables simple presetting with only the head.
  · Work can be performed even in a small space adjacent to machinery thanks to its compact design.
  · One unit can be used as a roughing and finishing head, and various lengths of toolholder heads can be easily preset.

  Days to Ship:	12 Day(s) or more

• 

  Touch point sensor (energizing formula)

  VERTEX

  Indicates the touch position by a lamp and sound.
  Accessories: Battery 12 V dry cell battery (size N) × 1 pc.

  Days to Ship:	12 Day(s) or more

• 

  Touch point sensor

  VERTEX

  A lamp indicated the touch position.
  [Features]
  A highly accurate energized ceramic probe.
  ·VPS series
  ·Shank diameter: 20 mm, 32 mm
  ·Grit size: ±0.005 mm
  ·Probe diameter: 10 mm
  ·Battery: N dry cell battery (1.5 V) × 2 pcs. (included)

  Days to Ship:	12 Day(s) or more

• 

  Centering bar

  FUJI TOOL

  [Features]
  · Can be used for everything from machining centers to NC milling machines.
  [Applications]
  · For general machine, NC machine, machining center, and other factory machine X and Y axis origin point location testing.

  Days to Ship:	12 Day(s)

• 

  Point Master

  NIIGATA SEIKI (SK)

  A presetter ideal for scribing work with milling machines.
  [Features]
  · High precision scribing work can be performed easily by slightly tightening the spindle milling chuck of the milling machine.
  · 60° angle scribing needle equipped as standard (80°tip angle replacement needle available).
  · Tip: With carbide tip.
  · Shank part: φ32 (diam. 32 mm) for K2-32, φ20 (diam. 20 mm) for K2-20.
  [Applications]
  · Can be used as a scribing tool for milling.

  Days to Ship:	16 Day(s) or more

• 

  Point Master Pro PMPC Series Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]
  · Detects reference point instantly even on non-conductive workpieces or machines.
  · Notifies user of touch position with LED and an electronic beep.

  Days to Ship:	12 Day(s) or more

• 

  Point Master Pro PMPC Series BBT Shank Type

  BIG DAISHOWA SEIKI

  [Features]
  · Detects reference point instantly even on non-conductive workpieces or machines.
  · Notifies user of touch position with LED and an electronic beep.

  Days to Ship:	12 Day(s) or more

• 

  Reference Position Detection Bar Spring for Replacement of Magic Center

  KASAHARA

  There are hooks on both ends of the spring, and the spring itself has two hooks.

  Days to Ship:	12 Day(s) or more

• 

  Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces)

  NISSIN SANGYO

  An ultra-precise tool setter with a detection accuracy of 1 μm.
  
  [Features]
  · An ultra-precise tool setter with a detection accuracy of 1 μm.
  · Uses scratch-resistant ceramic for the cutting edge detection part.
  · Ideal for detecting the position of the cutting edges of small diameter drills and end mills.
  · Adopts an internal contact system that can be used for non-conductive workpieces and machining centers with ceramic spindles.
  · Magnet on base plate.
  · Can be used with both vertical and horizontal types.

  Days to Ship:	16 Day(s) or more

• 

  Tool Point

  NIIGATA SEIKI (SK)

  A presetter used as a high precision positioning detector for milling cutters and machining centers.
  [Features]
  · Finds the 0 point rapidly with light sensor. (Conductivity)
  [Applications]
  · For setting the reference position in the Z direction.
  · Used for setting the zero point reference for standard to precision tolerance on general purpose and NC milling machines, machining centers, etc.

  • STOCK

  Days to Ship:	12 Day(s) or more

• 

  Stylus Center

  NIIGATA SEIKI (SK)

  Presetter optimal for high-precision X/Y-axis centering bar.
  [Applications]
  · It can detect the reference position within 2 μm.
  · Ideal for determining accurate reference points for general use, NC milling cutter and MC origin positions, etc.
  · Lapping finish is applied to working surface, which is the foundation of accuracy.
  · Enables positioning by simply placing the probe on the end face of the workpiece.
  · Suitable rotation speed: 450 to 600 rpm; over-increasing the rotation speed can cause damage.
  [Applications]
  · Used as a high-precision X/Y-axis centering bar.

  Days to Ship:	12 Day(s) or more

• 

  TS Test Bar

  MANYO TOOLS

  [Features]
  · On taper shank φ50 ± 0.005 run-out within 0.002. φ50 ± 0.005 roundness within 0.002, cylindricity within 0.002.
  · L dimension (from gauge line to test bar edge) ±0.005.

  Days to Ship:	18 Day(s) or more

• 

  Accu Stand (AM-M)

  BIG DAISHOWA SEIKI

  [Features]
  · A miniature flexible arm stand which provides secure locking with a special cam mechanism.
  · Strong magnet for firm hold.
  · The movable part is covered with rubber, protecting it from dust.

  Days to Ship:	16 Day(s) or more

• 

  Accu Stand (ASP-M)

  BIG DAISHOWA SEIKI

  [Features]
  ・ Standard type of a flexible arm stand that locks securely with a special and cam mechanism
  ・ Firmly fixed with a strong magnet
  ・ Since the movable part is covered with rubber, it shuts out dust

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Accu Stand HSK Shank Type

  BIG DAISHOWA SEIKI

  [Features]
  · Ideal for small machining center HSK-E spindles.
  · HSK-E shank type which can be directly mounted on spindles.

  Days to Ship:	12 Day(s) or more

• 

  Clamp Piece for φ6 Accu Stand

  BIG DAISHOWA SEIKI

  [Specifications]
  Tip hole ø8, side hole ø6
  [Applications]
  Please purchase when using a ø6 dial gauge.

  Days to Ship:	20 Day(s) or more

• 

  Accu Stand Arm Only Type

  BIG DAISHOWA SEIKI

  [Features]
  · Arm only type of the Accu Stand. Can be used for various purposes depending on personal requirements

  Days to Ship:	12 Day(s) or more

• 

  Accu Stand Cast Base Type

  BIG DAISHOWA SEIKI

  [Features]
  · A flexible arm stand which provides secure locking with a special cam mechanism
  ■ Cast Base Type
  · The surface plate is a "cast base type" ideal for precision measurements.
  · A highly stable base shape and precision polish processed bottom surface allow for more precise measurement.
  · Further, since the side face has been polished at a right angle to the bottom face, measurements while sliding can also be performed.

  Days to Ship:	12 Day(s) or more

• 

  Accu Stand Double-Magnet Type

  BIG DAISHOWA SEIKI

  [Features]
  · Double magnet type Accu-Stand. Ideal for machining and cutting workpieces

  Days to Ship:	12 Day(s) or more

• 

  Accu Stand Magnetic-Base Type

  BIG DAISHOWA SEIKI

  [Features]
  ·Firmly fixed with a strong magnet.
  ·Accu stand magnet base type.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Point Master (PMC Series/Straight Shank Type)

  BIG DAISHOWA SEIKI

  [Features]
  · Instantly transmits touch position with LED lamp and buzzer.
  · Notifies reduction of battery life via flashing LED during workpiece measurement.
  · A straight shank type.

  Days to Ship:	12 Day(s) or more

• 

  Point Master (PMG Series/Morse Taper Type)

  BIG DAISHOWA SEIKI

  [Features]
  · Instantly transmits touch position with LED lamp. Morse taper type

  Days to Ship:	12 Day(s) or more

• 

  Point Master (PMG Series/Straight Shank Type)

  BIG DAISHOWA SEIKI

  [Features]
  · Instantly transmits touch position with LED lamp. A straight shank type.

  Days to Ship:	1 Day(s) or more

• 

  Straight shank touch point

  NIKKENKOSAKU

  [Features]
  · With LED. Can be easily attached to / detached from Nikken Milling Chuck Styles 20 and 32.

  Days to Ship:	16 Day(s) or more

• 

  Straight shank micro touch

  NIKKENKOSAKU

  [Features]
  · 3D electronic reference point detector.
  · 3 Repeatability: ±2 μ swing type touch sensor.
  · 3 Large overtravel with red lamp and electronic buzzer that alert the touch position.
  · Red lamps around the entire periphery illuminate instantly with 3 touches.

  Days to Ship:	16 Day(s) or more

• 

  Straight shank micro touch (Internal contact type)

  NIKKENKOSAKU

  [Features]
  · Repeatability: ±2 μ.
  · An internal contact type detector which can also be used with non-conductors, with a large overtravel of x, y = ±7 mm, Z = 3 mm.
  · The moment you touch it, blue lamps light around the periphery.

  Days to Ship:	16 Day(s) or more

• 

  Machining Center Touch Point

  NIKKENKOSAKU

  [Features]
  · Tip of the ball is located in a spot 200 mm away from end face of the spindle, usable as a reference point of the Z-axis.
  · Equipped with an ultra-precision float mechanism in the thrust direction that enables position detection with a soft touch.

  Days to Ship:	16 Day(s) or more

• 

  Thick Touch Sensor (Current Supply System)

  SYIC

  [Features]
  · With an overrun protection function.
  [Applications]
  · Detects position in NC milling cutters and machining centers.

  Days to Ship:	1 Day(s)

• 

  Dial Type Tool Point

  NIIGATA SEIKI (SK)

  A dial type presetter that can output the zero datum point in the Z direction.
  [Features]
  · Using the dial gauge display, it is simple to set the zero datum point for tools.
  · With base magnet.
  [Applications]
  · Used as a dial type positioning detector for milling cutters and machining centers.

  Days to Ship:	1 Day(s)

• 

  Non-Magnetic Waterproof Type Point Finder

  NISSIN SANGYO

  Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm.
  
  [Features]
  · The waterproof structure prevents the cutting fluid from entering the sensor, thus avoiding measurement errors.
  · The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
  · Enables accurate measurement of thin workpieces. The stylus swings in the X, Y and Z directions.
  · Usable for iron and non-ferrous metal workpieces.
  · With the development of a new mechanism (patent pending), measurement accuracy has improved dramatically

  Days to Ship:	10 Day(s) or more

• 

  Non-Magnetic Waterproof Type Point Finder i

  NISSIN SANGYO

  Peace of mind even in harsh working environments thanks to IP67 waterproofing (IEC standard). Measurement error will not occur even if cutting fluid is applied. ±1 μm repeat accuracy is possible up to 80 mm. Even measures non-metal workpieces.
  
  [Features]
  · In addition to features of the above-mentioned "Non-Magnetic/Waterproof Type Point Finder," measurement on non-metallic workpieces is also enabled.
  · Capable of all types of measurement such as reference position setting, inner/outer diameter, centering, angle, groove width and height with high precision

  Days to Ship:	10 Day(s) or more

• 

  Tool Setter i

  NISSIN SANGYO

  Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.
  
  [Features]
  · Developed for machining centers with ceramic spindles.
  · Can also be used for non-conductive workpieces because of the internal contact system.
  · Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
  · A magnet is attached to the bottom to support both vertical and horizontal use.

  Days to Ship:	14 Day(s) or more

• 

  Non-Magnetic Buzzer Specification Point Finder

  NISSIN SANGYO

  [Features]
  · The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
  · Accurate measurement, even on thin workpieces.
  · Includes buzzer with simultaneous electronic sound and LED to provide notification of position detection.
  · Safe design that allows the stylus to swing in X/Y/Z directions.
  · The measurement accuracy of metals and nonferrous metals has been dramatically improved

  Days to Ship:	10 Day(s) or more

Loading...