Jigs for Manual Tightening

• 

  Screw Jack (SJK)

  MISUMI

  Model SJK-K is provided with a through hole in the center of the jack allowing the jack to be fixed by a bolt, etc.
  No. E-175A attachment is usable for the SJK type.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Clamp Support Screw Jack

  NABEYA

  Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.

  Days to Ship:	14 Day(s) or more

• 

  Clamp Support Screw Jack (CSJ)

  MISUMI

  Convenient for supporting various clamps.
  Allows connecting use of 2 or 3 in the case of one screw not being effective or lacking in height.
  Use of an attachment allows convenient support for deformed objects.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  HA-NE Clamp Set With T-Slot Bolt【2 Pieces Per Package】

  FUJI TOOL

  [Features]
  · Free type with continuously variable fastening ability.
  · Doesn't turn a hair even at intense vibrations.
  [Applications]
  · It is used to press and hold a workpiece or mold from above.

  Days to Ship:	12 Day(s)

• 

  Q Lock (Screw Type) Locating Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Screw Support - Long Stroke Type (2 Pcs 1 Set)

  SUPER TOOL

  [Features]
  · By providing intermediate male screws, a long stroke has been achieved. (1.5 to 2 times comparison by manufacturer)
  · By providing intermediate male screws, a long stroke has been achieved. (1.5 to 2 times comparison by manufacturer)
  · Turns an intermediate male screw to resolve problems that can occur when turning the male screw when a load is applied, such as scratches on the workpiece and slipped alignment.
  · When adjusting intermediate male screws, the screws in the upper and lower parts can be manipulated with minimal force, since the direction is the same and the pitch is different.
  · A lock screw (locking piece) to lock male threads for loosening prevention.
  [Applications]
  · For support of heavy objects, height adjustment of clamps, and suppression of chattering during cutting.
  · It is also ideal for support of heavy objects, height adjustment of clamps, and suppression of chattering during cutting.

  Days to Ship:	14 Day(s) or more

• 

  Toggle Side Clamp 6841

  NABEYA

  6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

  Days to Ship:	10 Day(s) or more

• 

  Screw Support with Magnetic Force

  NEW STRONG

  For height adjustment of workpieces. A set of 2 pcs. Materials: S45C HRC: 35 to 40

  Days to Ship:	16 Day(s) or more

• 

  Aluminum Screw Jack

  NABEYA

  Made of aluminum so doesn't scratch the base, clamps, etc. Convenient for use as a support jack for plastic clamp sets.

  Days to Ship:	14 Day(s) or more

• 

  Side Clamp Jack

  NABEYA

  It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustment

  Days to Ship:	16 Day(s) or more

• 

  Adjusting Clamp

  NABEYA

  Clamps for fixing workpieces on machining centers, milling machines, etc.
  [Features]
  ·Standard type with T-slot bolt.
  [Applications]
  ·Convenient for fixing the workpiece.

  Days to Ship:	14 Day(s) or more

• 

  Magnetic Jack

  NABEYA

  The main body has a built-in magnet and can be used for both horizontal and vertical machines. Lightweight as it is made of aluminum.

  Days to Ship:	10 Day(s) or more

• 

  Large Machine Screw Support

  NEW STRONG

  It is very useful for clamping large or tall workpieces.
  [Applications]
  It is used to support clamps and adjust the height of workpieces.

  Days to Ship:	16 Day(s) or more

• 

  Tapered Clamp With Supporting Screw EA637BA-24

  ESCO

  【Product Specifications】
  ・Material-Quenched steel with anti-wear finish
  ・Screw…M24 x 87
  ・A…30
  ・B…70
  ・C…200
  ・D x E…26 x 80

  Days to Ship:	16 Day(s) or more

• 

  Supporting Screw EA637BC-12

  ESCO

  【Product Specifications】
  ・Material-Quenched steel
  ・D…M12
  ・L…49
  ・D1…36
  ・K…10

  Days to Ship:	16 Day(s) or more

• 

  Supporting Screw EA637BC-20

  ESCO

  【Product Specifications】
  ・Material-Quenched steel
  ・D…M20
  ・L…69
  ・D1…50
  ・K…16

  Days to Ship:	16 Day(s) or more

• 

  Toggle Side Clamp 6844

  NABEYA

  6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.

  Days to Ship:	16 Day(s) or more

• 

  Universal Clamp

  NABEYA

  It can steplessly fasten tall and short workpieces.

  Days to Ship:	10 Day(s) or more

• 

  Universal Clamp Main Body

  NABEYA

  [Features]
  · Parts for universal clamps.
  · It can steplessly fasten tall and short workpieces.

  Days to Ship:	14 Day(s) or more

• 

  Screw Jack (Fixed) Type

  NABEYA

  Attachment for No. E-175A can be used for SJK type. SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

  Days to Ship:	16 Day(s) or more

• 

  Strap Clamp

  NEW STRONG

  [Features]Materials: S 45C, Hardness: HRC35, black oxide coating finish type.

  Days to Ship:	13 Day(s) or more

• 

  T-Slot Bolt EA637FG-250

  ESCO

  ESCO clamping parts (for hand tightening), T-slot bolt.
  High clamping force and long lifespan due to rolling thread manufacturing

  Days to Ship:	16 Day(s) or more

• 

  High Lock Screw【1-5 Pieces Per Package】

  MISUMI

  [Features]
  ·Even if screw is turned, head that comes in contact with workpiece does not rotate, preventing damage to workpiece
  ·By inserting ball between head part and thread section, cutting force is transmitted to threaded part via ball, making it more difficult to loosen than conventional screws
  ·Tightening torque is directly converted into clamping force linearly, so fastening is stronger than conventional screws

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Injeck Clamp Q-model

  MISUMI

  Clamping with mold bases is easy. The clamp and step block are connected to prevent losing.
  Opening of the oblong hole allows easy attachment and detachment from the side.
  Can be adjusted to 4 different heights by changing the position of the step block of the main unit.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Hold Clamp, Stopper

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Days to Ship:	16 Day(s) or more

• 

  Mini Low Height Clamp

  NABEYA

  With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.

  Days to Ship:	16 Day(s) or more

• 

  Rubber Cap 6893

  NABEYA

  Dedicated clamping screw for toggle clamps.

  Days to Ship:	14 Day(s) or more

• 

  Quick lock

  NABEYA

  Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.

  Days to Ship:	14 Day(s) or more

• 

  Toggle Down Clamp 6830

  NABEYA

  [Features]
  · 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Days to Ship:	14 Day(s) or more

• 

  Heavy Duty Toggle Hook Clamp 6849PH

  NABEYA

  Heavy-duty type hook clamp. The hook length can be adjusted.

  Days to Ship:	16 Day(s) or more

• 

  Swing Clamp B Type

  NABEYA

  It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.

  Days to Ship:	16 Day(s) or more

• 

  Toggle Hook Clamp 6848H

  NABEYA

  6848HNI is made of stainless steel. The hook length can be adjusted.

  Days to Ship:	14 Day(s) or more

• 

  Helical clamp

  NABEYA

  Achieve large fastening strength in restricted spaces. Can be used with two clamping methods.

  Days to Ship:	16 Day(s) or more

• 

  Universal Clamp Semi-Cylindrical Sealing Washer

  NABEYA

  [Features]
  · Parts for universal clamps.
  · The swivel pad fits on the workpiece and clamping surface for vertical tightening.
  · Although this product is equipped with T-nuts, it can also be used with them removed

  Days to Ship:	14 Day(s) or more

• 

  Atlas Screw Jack

  NABEYA

  Convenient for fixing workpieces thanks to its widened base and lengthened screw.

  Days to Ship:	16 Day(s) or more

• 

  Injeck Clamp

  NABEYA

  [Features]
  · The body is made of bainite cast iron and does not get damaged even in excessive tightening.
  · Can also be used for metal press clamps and the metal working clamps of injection molding machines.
  · If a T-slot nut is used, then of course it can also be used with T-groove tables

  Days to Ship:	14 Day(s) or more

• 

  Q Lock (Screw Type) Clamp Pin

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Q Lock (Screw Type) Locating Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Days to Ship:	14 Day(s) or more

• 

  Locating Pin (Adjustable Diameter Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Days to Ship:	14 Day(s) or more

• 

  Strong Nut

  NEW STRONG

  [Features]
  · A strong nut that plays an important role in various clamping applications.
  · Achieves axial force three times higher than previous by changing 80% of the friction at the bottom to ball friction resistance

  Days to Ship:	14 Day(s) or more

• 

  HA-NE Clamp【2 Pieces Per Package】

  FUJI TOOL

  [Features]
  · Free type with continuously variable fastening ability.
  · Doesn't turn a hair even at intense vibrations.
  [Applications]
  · It is used to press and hold a workpiece or mold from above.

  Days to Ship:	8 Day(s) or more

• 

  Tapered Clamp With Supporting Screw EA637BA-16

  ESCO

  【Product Specifications】
  ・Material-Quenched steel with anti-wear finish
  ・Screw…M16 x 55
  ・A…25
  ・B…50
  ・C…125
  ・D x E…18 x 45

  Days to Ship:	16 Day(s) or more

• 

  Tapered Clamp With Supporting Screw EA637BA-24B

  ESCO

  【Product Specifications】
  ・Material-Quenched steel with anti-wear finish
  ・Screw…M24 x 87
  ・A…35
  ・B…70
  ・C…250
  ・D x E…26 x 105

  Days to Ship:	16 Day(s) or more

• 

  Step Clamp With Supporting Screw EA637BB-10

  ESCO

  【Product Specifications】
  ・Material-Quenched steel with anti-wear finish
  ・Screw…M10 x 39
  ・A…20
  ・B…30
  ・C…100
  ・D x E…11 x 70

  Days to Ship:	16 Day(s) or more

• 

  Screw Jack EA637EA-140

  ESCO

  【Product Specifications】
  ・Material-Quenched steel with anti-wear finish
  ・Pad hole-Dia. 12mm
  ・The pads EA637EP-1 to -3 can be attached.

  Days to Ship:	16 Day(s) or more

Loading...