Cutters (Electric)

• 

  Ultrasonic Cutter

  SUZUKI

  [Features]
  · Ultrasonic vibration at 40,000 times per second, so excessive force is not needed for cutting.

  Days to Ship:	12 Day(s) or more

• 

  Ultrasonic Cutter SH-3510

  SONOTEC

  [Features]
  · It generates powerful and stable vibration even for high-load workpieces that are difficult to cut, and can withstand long-term use.
  · Used even in aircraft parts and materials processing.

  Days to Ship:	Quote

• 

  Ultrasonic Cutter SF-30

  SONOTEC

  [Features]
  · Lightweight, easy-to-carry product with an emphasis on workability.
  · Used even in aircraft parts and materials processing.

  Days to Ship:	Quote

• 

  High Nibbler (for Thick Boards)

  SANWADENKO

  [Features]
  · There is little warping and kinking.
  · The pipe can be vertically cut by replacing the tool holder (optional).
  · Hollow-out cutting can be performed. (Center cutting pilot hole 50 mm)
  [Applications]
  · For thick boards.
  · Enables straight and curved profile cutting.

  Days to Ship:	1 Day(s)

• 

  Ultrasonic Cutter SF-3441

  SONOTEC

  [Features]
  · A large amplitude type that increased the blade amplitude compared to the conventional model.
  · Also used in machining scenes of aircraft material.

  Days to Ship:	Quote

• 

  Iron Bar Cutter

  IKURA SEIKI

  [Features]
  · Dual insulation structure.
  · Uses spigot joint fixing method to prevent loosening of the fixed blade.
  · A tough device which can withstand continuous cutting and which features an air pack that increases in size.
  [Applications]
  · Rebar cutting.

  Days to Ship:	12 Day(s)

• 

  High Nibbler with Disposable Blade (for Thick Boards)

  SANWADENKO

  [Specifications]Sanwa electric tools, metal plate cutting machine "Hi Nibbler" (for thick plates)
  [Material] steel

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Full Thread Cutter "Hard Cutter"_Replacement Blade

  KAMEKURASEIKI

  [Applications]
  · Cutting Material Full-threaded Bolt For Both Stainless Steel and Iron
  [Specifications]
  · Applicable Model: DW-404/DW-408B

  Days to Ship:	Quote

• 

  Ultrasonic Cutter SH-3510

  SONOTEC

  [Features]
  · Features a high output of 500 W for cutting a wide variety of materials.
  · Used even in aircraft parts and materials processing.

  Days to Ship:	Quote

• 

  Replacement Carbide Blade For Mini Cutters

  ARS

  [Features]
  · Replacement blade for HC-1007A/HC-1015A/PC-1062. (ø50 carbide circular blade)
  · Also cuts aramid fiber, Kevlar, Vectran, Dyneema and Zylon PBO fiber.
  · The carbide blade enables the cutting of super fibers such as aramid fiber.
  [Applications]
  · Knife diameter: ø50 mm
  · Blade hardness: HV 1,300 or greater

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Rechargeable Rebar Cutter

  OGURA

  [Features]
  · About 2 times faster at cutting than conventional equipment, giving about 2 times better work efficiency.
  · In one charge, D13 (SD345) can be cut 240 times.

  Days to Ship:	Quote

• 

  Charging Angle Processor, "Angle Compo Cordless"

  IKURA SEIKI

  Cordless type angle processor. Various processes are possible by changing attachments and it is ideal for work in locations where a power source can be difficult to secure.

  Days to Ship:	Quote

• 

  Ultrasonic Cutter SF-653

  SONOTEC

  [Features]
  · Unique power system and air-cooling air inlet prevent heat generation, enabling continuous use for long periods of time.
  · Used even in aircraft parts and materials processing.

  Days to Ship:	Quote

• 

  Chargeable Cable Cutters

  PANASONIC

  [Features]
  · Cuts through CV cable at approximately 5 seconds/wire.
  · Maximum cutting diameter of φ32 mm. It can easily cut thick CVT wires and CV wires with one finger and improves efficiency of cable cutting work in various sites.

  Days to Ship:	14 Day(s)

• 

  Cable Cutter Blade

  PANASONIC

  [Features]
  · A cable cutter blade made by Panasonic.

  Days to Ship:	14 Day(s)

• 

  Ultrasonic Cutter SUW-30cD

  AS ONE

  【Product Specifications】
  ・Model number： SUW-30CD
  ・Titanium horn (high amplitude type)
  ・Size： Body/180 x 175 x 79mm, Hand piece/φ34 x 216mm
  ・Cord length： 2.0m
  ・Maximum output： 35W (continuously variable)
  ・Oscillation frequency： 40kHz
  ・Input： AC100V 50/60Hz 0.7A
  ・Weight： Body/approximately 1.6kg, Hand piece/approximately 0.3kg

  Days to Ship:	8 Day(s) or more

• 

  Rechargeable Square Hole Cutter “Dual”

  PANASONIC

  [Features]
  · Equipped with a "Dual circuit"; can differentiate whether 18 V or 14.4 V battery has been installed, for control enabling tools to be used at the most appropriate current and voltage.
  · Product has passed international standard IP5X test, and is robust against dust and coarse powder.
  · Possible to start cutting without a pilot hole.
  · Plenty of dust can be collected in the dust case.
  · With base cover to avoid getting decorative materials dirty.

  Days to Ship:	14 Day(s)

Loading...