(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

FUJIGEN Replaceable Blade Type Chamfering Tools/Tips/Blades（Single blade, two blades：Single blade）

30 items

: 30; 45; 60

Days to Ship	All 1 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less 18 Day(s) or Less

Momimen

FUJIGEN

[Features]
· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

STOCK
Days to Ship: 1 Day(s) or more
Momimen Nano

FUJIGEN

[Features]
· Smallest class in the industry. A screw-on type, the smallest class in the industry thanks to its industry-smallest class tip (underneck diameter of φ6 mm).
· Interference of vise, clamp and the like can be avoided.
· Capable of machining previously unreachable locations.

Days to Ship: 10 Day(s) or more
Mini momi

FUJIGEN

[Features]
· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

Days to Ship: 8 Day(s) or more
Decamomi

FUJIGEN

[Features]
· Only one tool needed for both gouging and C-chamfering. Improves productivity by helping reduce the number of tools used in ATC tool changes.
· The dedicated tip has a unique shape, eliminating the risk of vibration and damage.

Days to Ship: 8 Day(s) or more
60° Momimen

FUJIGEN

[Features]
· A throw-away type requiring only a tip change (no tool correction required).
· This tool allows C-chamfering and conical gouging, while reducing the number of tools used in ATC tool changes, and improving machining speed and productivity.
· The shank diameter is φ16 and the cutting edge diameter is φ12, making it suitable for 60° chamfering in tight spaces.

Days to Ship: 12 Day(s) or more
Mini eco

FUJIGEN

[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life

Days to Ship: 12 Day(s) or more
Momi Eco

FUJIGEN

[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life

Days to Ship: 12 Day(s) or more
Ecomen

FUJIGEN

[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life

Days to Ship: 12 Day(s) or more
Mini eco 2

FUJIGEN

[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life

Days to Ship: 12 Day(s) or more
Momi Eco 2

FUJIGEN

[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life

Days to Ship: 10 Day(s) or more
Ecomen 2

FUJIGEN

[Features]
· Reduces the processing cost. : The 3-cornered insert reduces customer machining costs.
· Improved tip shape and cutting edge specification improve machinability and chip discharge.
· Ultrafine particle base material has a new coating for a long service life

Days to Ship: 16 Day(s) or more
Chamfering cutter

FUJIGEN

[Features]
· Wide variety. Angle can be selected from 15° to 75° (5° increments) according to applications.
· Tips are available in many types to support diverse workpieces.

Days to Ship: 12 Day(s) or more
Young Men

FUJIGEN

[Features]
· C15 chamfering. An excellent finish without chattering after one round of chamfering.
· Chamfering performance next only to that of "Gentlemen" at a price equivalent to "Chamfering Cutter".

Days to Ship: 10 Day(s) or more
Gentlemen

FUJIGEN

[Features]
· The longest blade length. It is also possible to machine difficult-to-cut materials with a unique breaker with a tip blade length of 30 mm.
· Available in 13 angles from 15° to 75°.

Days to Ship: 8 Day(s) or more
Machining Bit

FUJIGEN

[Features]
· For drilling machines. Excellent sharpness is provided due to high-speed steel tip with breaker.
· Lineup of 30°, 45°, and 60° types.

STOCK
Days to Ship: 1 Day(s)
Kame Cutter

FUJIGEN

[Features]
· Reduction of work time. : The special tip shape enables high-feed processing

Days to Ship: 12 Day(s)
Ryanmencut / V

FUJIGEN

[Features]
· Simultaneous chamfering. : Can be used for front and back chamfering, as well as side V-grooving

Days to Ship: 8 Day(s) or more
Uratorimen-C

FUJIGEN

This tool is specialized for back chamfering in drilling and edge chamfering.
The insert with chip breaker provides excellent sharpness.
Since the insert is replaceable, there is no need to re-grind it.

Days to Ship: 8 Day(s) or more
Multi Angle Mill

FUJIGEN

[Features]
· Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.
· 0° to 90° at 5° pitch for easy, reliable angle adjustment

Days to Ship: 8 Day(s) or more
Menmen

FUJIGEN

[Features]
· Small diameter type. Small diameter type supporting smaller diameter machining than conventional chamfer cutters.
· Angle can be selected from 15° to 75° (5° increments) according to applications.
· Tips are available in many materials to support diverse workpieces.

Days to Ship: 10 Day(s) or more
Baitender

FUJIGEN

[Features]
· Turning tool type. Telescopic turning tool enables a wide range of chamfering.
· Hole chamfering capacity: φ28 mm - φ134 mm.
· Uses the T32 type tip.

Days to Ship: 11 Day(s) or more
Baitender dedicated arm

FUJIGEN

It is a dedicated accessory for the Baitender.
A wide area of chamfering is possible with the telescopic tool bit.

Days to Ship: 16 Day(s) or more
R Cutting Bit

FUJIGEN

[Features]
· Easy rounding change: Various round chamfering is possible by exchanging the tip.

Days to Ship: 16 Day(s) or more
R Special Jr.

FUJIGEN

Single flute replaceable insert for round chamfering of R0.5 to R5 and also for small diameter round chamfering.
Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single process.

Days to Ship: 12 Day(s) or more
R Special

FUJIGEN

Replaceable insert for round chamfering of R0.5 to R5.
Carbide insert that can be used on 4 sides with 1 insert.

Days to Ship: 16 Day(s) or more
R-Nouveau Jr.

FUJIGEN

Single flute replaceable insert for round chamfering of R5 to R10.
Fujigen's original negative/positive method is used, so it is possible to cut R10 in a single process even with compact machining.

Days to Ship: 12 Day(s) or more
R-Nouveau

FUJIGEN

Various round chamfering is possible by exchanging the tip.

Days to Ship: 8 Day(s) or more
RC Hand Cutter

FUJIGEN

Round chamfering and C chamfering of R1, R2, and R3 are possible by exchanging the insert.
The unique insert replacement method makes insert replacement fast and accurate.

Days to Ship: 12 Day(s) or more
Ryanmencut R

FUJIGEN

[Features]
· Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.
· Mini R is for front only.
· Uses a tip that allows 8 corners to be used.

Days to Ship: 16 Day(s) or more
Mini R

FUJIGEN

8 corners of an insert can be used.
Round chamfering and C chamfering are possible by exchanging the insert.

Days to Ship: 12 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	1 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Tool Material Type
Tool Diameter (D)(mm)
Tip angle (θ)
Application
work material
Single blade, two blades
Peripheral Blade Y/N
Coating Y/N
Coating Type
R Size (R)(mm)


Brand	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN	FUJIGEN
Product Series	Momimen	Momimen Nano	Mini momi	Decamomi	60° Momimen	Mini eco	Momi Eco	Ecomen	Mini eco 2	Momi Eco 2	Ecomen 2	Chamfering cutter	Young Men	Gentlemen	Machining Bit	Kame Cutter	Ryanmencut / V	Uratorimen-C	Multi Angle Mill	Menmen	Baitender	Baitender dedicated arm	R Cutting Bit	R Special Jr.	R Special	R-Nouveau Jr.	R-Nouveau	RC Hand Cutter	Ryanmencut R	Mini R
Days to Ship	1 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	10 Day(s) or more	16 Day(s) or more	12 Day(s) or more	10 Day(s) or more	8 Day(s) or more	1 Day(s)	12 Day(s)	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	8 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more
Specifications	STOCK														STOCK
Tool Material Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tool Diameter (D)(mm)	13.5 ～ 16.15	6 ～ 7.4	9	22.5 ～ 26.6	11.88	10.3 ～ 12.3	14.2 ～ 17.1	22 ～ 26.6	16.5 ～ 18.6	22.3 ～ 25.3	34.1 ～ 36.9	29.9 ～ 37.9	58.2 ～ 62.2	50.7 ～ 73.3	21.77 ～ 67.94	34.9	19.5 ～ 45.6	6.2 ～ 14	-	13.5 ～ 18.2	49.85～134.6	16	-	25	56	35.4	69.2	25	30 ～ 48	16
Tip angle (θ)	90 ～ 118	90 ～ 120	90	90 ～ 120	60	90 ～ 120	90 ～ 120	90 ～ 120	30 ～ 60	30 ～ 60	30 ～ 60	15 ～ 70	30 ～ 60	15 ～ 75	30 ～ 60	45	45	45	0–90	15 ～ 75	45	45	-	-	-	-	-	-	-	-
Application	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Centering (Positioning) / Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal / V Groove	Chamfering/Horizontal	Chamfering/Horizontal	Chamfering/Horizontal	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer	Round Chamfer
work material	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade
Peripheral Blade Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA
Coating Y/N	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.5 to 4	0.5~5	0.5~5	5–10	5–10	1–3	0.5~5 ～ 1–5	1–5

Configure

Specification/Dimensions

Tool Material Type
- High-speed steel
- Carbide
Details

Clear

Tool Diameter (D)(mm)
0.45～2.1

0.45～2.7

0.65～2.1

0.65～2.7

1–6

2–10

3~14

3 to 15

6

6.2

7.4

7.5

9

10

10.3

11.88

12

12.3

13

13.5

14

14.2

14.5

14.6

14.8

15

15.1

15.2

15.5

15.6

16

16.15

16.3

16.5

17

17.1

17.7

18

18.2

18.6

19.5

20

21.77

22

22.3

22.5

23.4

25

Max: 25, Min: 4.2

25.20

25.3

26.6

29

29.9

30

Max: 30, Min: 4

30.20

30.5

Max: 31, Min: 10

31.7

31.9

32.6

32.7

33.1

33.3

34.1

34.8

34.9

35.4

35.9

36

36.9

37.1

37.9

38

39.83

40

Max: 41, Min: 20

45.6

48

49.85～134.6

50.7

52.8

53.6

53.91

54.3

56

56.8

57.0

57.9

58.2

61.4

62.2

64.6

67.4

67.94

69.2

69.8

71.8

73.3
Drawing

Clear

Tip angle (θ)
0–90

5～85

15

20

25

30

35

40

45

45°

50

55

60

65

70

75

90

118

120

145+90
Drawing

Clear

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Engraved
- Other
Images

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Details

Clear

Single blade, two blades
- Single blade
Images

Clear

Peripheral Blade Y/N
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- TiAlN
- TiN
- DLC
- Non-Coated
- AlCrN
- Other
Details

Clear

R Size (R)(mm)
0.2

0.4

0.5

0.5/1/1.5/2

0.5 to 4

0.5~5

0.8

1

1RM

1RY

1/2/3/4

1–3

1–5

1.5

2

2RM

2RY

3

3RM

3RY

4

4RM

4RY

5

5RM

5–10

6

7

8

9

10

XRM

XRY
Drawing

Clear