MISUMI Locating Pins（Mounting Side Tolerance：p6）

• 

  MiSUMi Economy

  Locating Pin - Straight, Configurable[RoHS Comliant]

  MISUMI

  Straight Type Locating Pins with the diameter configurable in 0.01 mm increments. *The minimum order quantity is 30 pcs. Please check with the part number tab or WOS

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Large Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to tolerance p6 only.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Locating Pins - Small Head, Round Tapered - Press Fit

  MISUMI

  - Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Sphere Large Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Large Flat Head (Press Fit)

  MISUMI

  - Locating Pins - Large Flat Head (Press Fit) from MISUMI.
  - Flat Head Type. Suitable if the mating side has limited space.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polished, centering hole is may not available for SUS304.
  - The material of locating pin can be selected 3 types, SKS3 Equivalent, SUS304, SUS440C or 13Cr stainless.
  - The insertion guide is applicable to tolerance p6 only.
  - The tolerance of locating pin head is h6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• • On Sale Till 31/03/2025

  

  Locating Pins - Small Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Small Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to both the tolerance m6 and p6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Locating Pins - Tip Shape Selectable (Press Fit)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Press Fit) from MISUMI.
  - The tip shape is selectable from three types, Tapered (A), Taper R (B), Spherical (C). Highly customizable with each dimension configurable. Press Fit.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Height Adjusting Pins - Counterbored

  MISUMI

  - Height Adjusting Pins – Counterbored from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Sphere Small Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Tapped)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - For tapped type, unless described otherwise on the drawing, the spec. design is the same as for Press Fit Type. For D Tolerance g6, h7, no Insertion guide is provided. (ℓ1)
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Tapped

  MISUMI

  - Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished and centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Threaded

  MISUMI

  Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Tapped)

  MISUMI

  - Locating Pins - Straight, Tapered (Tapped) from MISUMI.
  - The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection -Press Fit-

  MISUMI

  Straight Type with the diameter configurable in 0.01 mm increments has been newly offered. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Height Adjusting Pins - Press Fit

  MISUMI

  - Height Adjusting Pins - Press Fit from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
  - A straight positioning pin made of high hardness stainless steel.
  - Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
  - Tapped type locating pin provided tapped thread for disassembled.
  - For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
  - The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Tapped)

  MISUMI

  - Locating Pins - Straight, Sphere (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins-High Hardness Stainless Steel/R/Taper R/Press Fit

  MISUMI

  R and Taper R Types have been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit) from MISUMI.
  - Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
  - If the diameter exceeds Ø10, core hardness may be 30HRC~.
  - For high hardness stainless steel large head tapered type, the configurable range of dimensions has been further widened and the number of available alterations has been increased.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel Sphere Large Head (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel Sphere Large Head (Press Fit) from MISUMI.
  - Sphere Large Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
  - If the diameter exceeds Ø10, core hardness may be 30HRC~.
  - For high hardness stainless steel sphere large head type, the configurable range of dimensions has been further widened.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Tapped

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)

  MISUMI

  - Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped) from MISUMI.
  - Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polishing and centering hole is sometimes not available for SUS304.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Press Fit)

  MISUMI

  - Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Flat Head (Press Fit)

  MISUMI

  Flat Head Type. Suitable if the mating side has limited space.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)
  - Large Flat Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - If the diameter of locating pin exceeds Ø10, core hardness may be 30HRC~.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - The material of this locating pin is made of High hardness stainless steel.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Small Head, Tapered (Press Fit)

  MISUMI

  For High Hardness Stainless Steel, Small Head Tapered Type, the configurable range of dimensions has been further widened. For order of up to 1,000 pcs., the 7th Day Shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Air Vent, Threaded

  MISUMI

  Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Press Fit

  MISUMI

  R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)

  MISUMI

  - Locating Pins - Large Head Tapered (Plastic Tip - Press Fit) from MISUMI.
  - Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
  - SUS304 locating Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins Double Stepped - Press Fit

  MISUMI

  [Features]Suitable for positioning workpieces with different hole diameters. It is installed by press-fitting.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins for Height Adjusting - Large Head Press Fit

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins for Height Adjusting - Small Head Press Fit

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s)

• 

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins Small Head Round Tapered

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
  - Shouldered with each dimension configurable.
  - Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - SUS304 may not be polished and may have no centering hole.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Tapped)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a female thread.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pin High Hardness Stainless Small Head Spherical -Press Fit-

  MISUMI

  For High Hardness Stainless Steel Sphere Small Head, the configurable range of dimensions has been further widened and the number of available alterations has been increased. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

Loading...