(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 sampai dengan 20:00 pada tanggal 16/6/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (WIB) 16/6/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
NACHI(FUJIKOSHI) Carbide Square End Mills（Machining Application：Inclined Cuts）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
GSX MILL Slot 1.5D GSXSLT-1.5D
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
The GS hard coating makes it ideal for ultra-high-speed machining of high-hardness materials.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of continuous high-performance drilling of holes and grooving with a wide range of materials, from raw materials to hardened materials.
Days to Ship: 16 Day(s) or more -
GS MILL Long Neck, 2-Flute GSN2
NACHI(FUJIKOSHI)
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
Days to Ship: 12 Day(s) or more -
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: 10 Day(s) or more -
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
GSX MILL 4-Flute Blade 2D GSX4C-2D
NACHI(FUJIKOSHI)
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cuttingDays to Ship: 16 Day(s) or more -
DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC
NACHI(FUJIKOSHI)
End mill for aluminum, suitable for a wide range of side wall machining, grooving deep grooves or grooving in deep locations.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Ideal for rough and medium finishing of materials from steel to stainless steel. High performance machining with BT30 machines is possible with little cutting resistance.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel.
Days to Ship: 16 Day(s) or more -
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Days to Ship: 12 Day(s) or more -
GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing. Cutting edge has a sharp corner.
Days to Ship: 12 Day(s) or more -
GSX MILL 2-Flute Blade 2D GSX2C-2D
NACHI(FUJIKOSHI)
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]
· Blade Shape: With Lead
[Applications] Flat surfaces / side surfaces / grooves / inclined cuttingDays to Ship: 16 Day(s) or more -
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
GSX MILL 4-Flute Blade 3D GSX4C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
GSX MILL VL Ti/ SUS 2.5D GSXVL4T-2.5D
NACHI(FUJIKOSHI)
The variable split, variable lead, and sharp cutting edge suppress chatter and make it suitable for heat-resistant alloys.
Days to Ship: 16 Day(s) or more -
X's Mill Geo Long Shank 4GEOLS
NACHI(FUJIKOSHI)
High precision machining is possible even for deep engraving.
Days to Ship: 11 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.
Days to Ship: 16 Day(s) or more -
Carbide Mini Square End Mill with 2 Flutes 2MNE
NACHI(FUJIKOSHI)
Carbide solid type small diameter end mill. Suitable for grooving precision molds and precision components.
Days to Ship: 16 Day(s) or more -
Carbide Mini Square End Mill with 4 Flutes 4MNE
NACHI(FUJIKOSHI)
Carbide solid type small diameter end mill. Suitable for side-wall machining precision molds and precision components.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
[Features]
· End mill for aluminum and copper alloys.
· Dry machining of aluminum is possible.Days to Ship: 12 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Days to Ship: 16 Day(s) or more -
GSX MILL 2-Flute Blade 3D GSX2C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
GSX MILL 2-Flute Blade 4D GSX2C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.
Days to Ship: 11 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of applications from raw materials to high hardness steel.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Suitable for side processing of wide side surfaces and deep positions.
Days to Ship: 16 Day(s) or more -
Days to Ship: 16 Day(s) or more -
Long Neck for Copper Work, 2-Flute CURIB
NACHI(FUJIKOSHI)
Ideal for fine processing of copper electrodes. Also suitable for aluminum. Available in various sizes and can be used for all kinds of machining.
Days to Ship: 16 Day(s) or more -
DLC Mill, Sharp Corner, 2-Flute 2DLCSC
NACHI(FUJIKOSHI)
End mill for aluminum and copper alloys. Adopts sharp corners.
Days to Ship: 16 Day(s) or more -
DLC Mill Slot Long Shank DLCSLTLS
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining of aluminum alloys from hole drilling to groove cutting. Suitable for deep engraving work.
Days to Ship: 16 Day(s) or more -
GS MILL Long Neck, 4-Flute GSN4
NACHI(FUJIKOSHI)
Ideal for fine machining of molds. Available in various sizes and can be used for all kinds of machining.
Days to Ship: 12 Day(s) or more -
GSX MILL 3-Flute Blade 2D GSX3C-2D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
GSX MILL Roughing 2.5D GSXRE-2.5D
NACHI(FUJIKOSHI)
Improved fracture resistance when used at high speeds for high efficiency. The GSX coating further improves heat resistance and abrasion resistance.
Days to Ship: 16 Day(s) or more -
GSX MILL 4-Flute Blade 1D GSX4C-1D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Days to Ship: 16 Day(s) or more -
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for side surface machining.
Days to Ship: 10 Day(s) or more -
NACHI(FUJIKOSHI)
General purpose carbide end mill. Suitable for side surface machining.
Days to Ship: 16 Day(s) or more -
Days to Ship: 16 Day(s) or more -
GSX MILL 4-Flute Blade 2.5D P Type GSX4P-2.5D
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Days to Ship: 16 Day(s) or more -
GSX MILL 2-Flute Blade 1.5D GSX2C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Days to Ship: 16 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 11 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 11 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more |
| Blade diameter (D)(φ) | 1 ～ 16 | 1 ～ 20 | 1 ～ 2 | 3 ～ 20 | 1 ～ 16 | 0.2 ～ 6 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 0.2 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.2 ～ 20 | 0.1 ～ 2 | 1 ～ 2 | 1 ～ 20 | 3 ～ 16 | 1 ～ 20 | 1 ～ 20 | 2 ～ 32 | 2 ～ 20 | 3 ～ 20 | 1 ～ 20 | 0.4 ～ 4 | 1 ～ 20 | 2 ～ 20 | 1 ～ 10 | 1 ～ 20 | 4 ～ 20 | 1 ～ 20 | 2 ～ 20 | 2 ～ 20 | 2 ～ 20 | 1 ～ 20 | 1 ～ 20 |
| Blade length (ℓ)(mm) | 1.5 ～ 24 | 2.5 ～ 38 | 3 ～ 6 | 7.5 ～ 50 | 3 ～ 32 | 0.3 ～ 9 | 4 ～ 80 | 2.5 ～ 50 | 1.5 ～ 30 | 2 ～ 40 | 12 ～ 56 | 13 ～ 38 | 13 ～ 38 | 0.5 ～ 50 | 2.5 ～ 50 | 2 ～ 40 | 1.5 ～ 30 | 3 ～ 60 | 7.5 ～ 50 | 4.5 ～ 30 | 0.4 ～ 38 | 0.2 ～ 6 | 3 ～ 6 | 3 ～ 38 | 8 ～ 32 | 3 ～ 60 | 4 ～ 80 | 6 ～ 70 | 10 ～ 56 | 18 ～ 75 | 3 ～ 38 | 0.6 ～ 6 | 3 ～ 38 | 3 ～ 30 | 1.5 ～ 15 | 2.5 ～ 40 | 10 ～ 50 | 1 ～ 20 | 6 ～ 38 | 6 ～ 38 | 6 ～ 38 | 2.5 ～ 50 | 1.5 ～ 30 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | 0.5 ～ 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | 12 ～ 82 | - | - | - | - | - | - | - | - | - | - | - | 2 ～ 35 | - | 8 ～ 82 | 4 ～ 80 | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 4 ～ 16 | 3 ～ 20 | 6 | 6 ～ 20 | 4 ～ 16 | 4 ～ 6 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 3 ～ 4 | 4 | 4 ～ 20 | 6 ～ 16 | 4 ～ 20 | 4 ～ 20 | 4 ～ 32 | 4 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 6 | 4 ～ 20 | 4 ～ 20 | 4 ～ 10 | 4 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 |
| Number of flutes(sheet) | 3 | 4 | 4 | 4 | 3 | 2 | 4 | 4 | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 2 | 2 | 4 | 2 | 3 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 3 | 4 | 3 | 4 | 4 | 4 | 4 | 2 | 4 | 2 |
| Overall Length (L)(mm) | 40 ～ 90 | 38 ～ 100 | 50 | 45 ～ 100 | 50 ～ 115 | 45 ～ 120 | 40 ～ 140 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 50 ～ 125 | 50 ～ 100 | 50 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 120 | 45 ～ 100 | 60 ～ 200 | 38 ～ 100 | 40 | 40 | 40 ～ 100 | 50 ～ 115 | 40 ～ 120 | 40 ～ 140 | 50 ～ 175 | 50 ～ 125 | 60 ～ 155 | 50 ～ 100 | 45 ～ 80 | 40 ～ 100 | 50 ～ 200 | 50 ～ 150 | 40 ～ 100 | 45 ～ 100 | 40 ～ 100 | 40 ～ 100 | 50 ～ 100 | 50 ～ 100 | 40 ～ 100 | 40 ～ 100 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[◎] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | - | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts | Inclined Cuts |
| Coating | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | DLC | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) | - | - | DLC | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | - | CrN | DLC | DLC | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | - | - | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) |
| Blade tip shape | With Lead | Sharp Edge | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead |
| Type | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Long-Neck Square | Square | Roughing | Square | Square | Square | Square | Square | Square |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
62
-
63
-
64
-
65
-
66
-
67
-
70
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
200
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- MISUMI (118)
- OSG (83)
- NS TOOL (49)
- NACHI(FUJIKOSHI) (43)
- UNION TOOL (23)
- SANKO MFG (14)
- KYOWA SEIKO (13)
- 7 LEADERS (11)
- Poulten&Graf (5)
- GCT (2)
- GUHRING (1)
- PROCHI (0)
- OMIKOGYO (0)
- ISCAR (0)
- TAIYO-TOOL (0)
- SANDVIK (0)
- MAPAL (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- THE CUT (0)
- VAN HOORN (0)
- WIDIN (0)
- EIKOSHA (0)
- ASAHI TOOLS (0)
- ATOM (0)
- MITSUBISHI HITACHI TOOL (0)
- KYOCERA (0)
- TOYO DRILL (0)
- DIJET (0)
- OKAZAKI SEIKO (0)
CAD
-
- 2D
- 3D
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy