(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

NS TOOL Ball End Mills (Carbide)

30 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less

MSB345 3-Flute Ball-End Mill

NS TOOL

Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Days to Ship: 16 Day(s) or more
SFB200 CBN Super Finish Ball End Mill

NS TOOL

The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

Days to Ship: 16 Day(s) or more
MSBH345 3-Flute Ball-End Mill for High-Hardness

NS TOOL

Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Days to Ship: 16 Day(s) or more
SSB200 CBN Super Speed Ball End Mill

NS TOOL

High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

Days to Ship: 16 Day(s) or more
MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)

NS TOOL

Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

Days to Ship: 16 Day(s) or more
MSBH230 2-Flute Ball-End Mill for High-Hardness

NS TOOL

Standard type ball end mill for high hardness. Ideal for finishing

Days to Ship: 8 Day(s) or more
SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

NS TOOL

The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

Days to Ship: 16 Day(s) or more
NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

NS TOOL

World's smallest ball end mill "Micro Ball" extends the microfabrication area

Days to Ship: 16 Day(s) or more
MSB230 MUGEN-COATING 2-Flute Ball End Mill

NS TOOL

Supports three-dimensional precision machining from low to high speeds

Days to Ship: Same day or more
MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

NS TOOL

Long Neck Ball End Mill for Short Shank Type (supports shrink fit)

Days to Ship: 16 Day(s) or more
MSB230S MUGEN-COATING Short Ball End Mill

NS TOOL

The high-rigidity design enables high speed machining without chattering

Days to Ship: 16 Day(s) or more
MSBL230 MUGEN-COATING Long Ball End Mill

NS TOOL

Machining utilizing the benefits of a long shank is possible

Days to Ship: 16 Day(s) or more
MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

NS TOOL

The tuned Infinity coating sustains high precision machining for a long time

Days to Ship: 16 Day(s) or more
MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels

NS TOOL

Large cutting depth can be set, with effective high-speed feed

Days to Ship: 16 Day(s) or more
Miniature Ball End Mill NCB-2

NS TOOL

Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

Days to Ship: 16 Day(s) or more
X Coated Miniature Ball-End Mill NCB-2X

NS TOOL

Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

Days to Ship: 10 Day(s) or more
X Coated Ball-End Mill NSB-2X

NS TOOL

Ideal for high-precision 3D processing. A universal type for roughing, semi-finishing and finishing

Days to Ship: 10 Day(s) or more
Long Ball End Mill NSBL-2

NS TOOL

The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

Days to Ship: 16 Day(s) or more
Aluminum Ball-End Mill ALB225

NS TOOL

The unique blade shape suppresses chattering during corner and side machining

Days to Ship: 16 Day(s) or more
MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230

NS TOOL

Infinity coating has been adopted for the extra long ball end mill. Machining utilizing the benefits of a long shank is possible

Days to Ship: 16 Day(s) or more
Ball End Mill for Copper Electrode / Aluminum / Plastic DB

NS TOOL

Uses a very sharp cutting edge for outstanding nonferrous machining performance

Days to Ship: 16 Day(s) or more
Aluminum Ball-End Mill (DLC Coating) ALB225-DLC

NS TOOL

Adopts a highly adhesive DLC coating suited to long periods of machining.

Days to Ship: 16 Day(s) or more
SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Days to Ship: 16 Day(s) or more
NSB-2 Ball End Mill

NS TOOL

[Features]
· Ball end mill suitable for use with materials from carbon steel to heat-treated steel.

Days to Ship: 16 Day(s) or more
NLBL-2 Long Blade Long Shank Ball End Mill

NS TOOL

[Features]
· Ball end mill suitable for use with materials from carbon steel to heat-treated steel.

Days to Ship: 16 Day(s) or more
Ball End Mill for Resin【1-6 Pieces Per Package】

NS TOOL

Days to Ship: 12 Day(s) or more
Carbide End Mills

NS TOOL

Days to Ship: 12 Day(s)
MUGEN-Coating Two-flutes Ball End Mill

NS TOOL

Days to Ship: 12 Day(s)
Two-flute Ball End Mill for Hardened Steels

NS TOOL

Days to Ship: 1 Day(s) or more
Two-flute MUGEN-Coating Ball End Mill

NS TOOL

Days to Ship: 8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	1 Day(s) or more

Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type


Brand	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL
Product Series	MSB345 3-Flute Ball-End Mill	SFB200 CBN Super Finish Ball End Mill	MSBH345 3-Flute Ball-End Mill for High-Hardness	SSB200 CBN Super Speed Ball End Mill	MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)	MSBH230 2-Flute Ball-End Mill for High-Hardness	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	MSB230 MUGEN-COATING 2-Flute Ball End Mill	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MSBL230 MUGEN-COATING Long Ball End Mill	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels	Miniature Ball End Mill NCB-2	X Coated Miniature Ball-End Mill NCB-2X	X Coated Ball-End Mill NSB-2X	Long Ball End Mill NSBL-2	Aluminum Ball-End Mill ALB225	MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230	Ball End Mill for Copper Electrode / Aluminum / Plastic DB	Aluminum Ball-End Mill (DLC Coating) ALB225-DLC	SSPB220 CBN Super Spiral Ball End Mill	NSB-2 Ball End Mill	NLBL-2 Long Blade Long Shank Ball End Mill	Ball End Mill for Resin【1-6 Pieces Per Package】	Carbide End Mills	MUGEN-Coating Two-flutes Ball End Mill	Two-flute Ball End Mill for Hardened Steels	Two-flute MUGEN-Coating Ball End Mill
Days to Ship	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s)	12 Day(s)	1 Day(s) or more	8 Day(s) or more
R Size(mm)	0.5 ～ 6	0.1 ～ 1	0.5 ～ 3	0.1 ～ 1	0.1 ～ 3	0.05 ～ 6	0.01 ～ 0.05	0.005 ～ 0.05	0.05 ～ 6	0.1 ～ 6	0.1 ～ 6	0.1 ～ 5	0.05 ～ 3	0.1 ～ 3	0.2 ～ 0.9	0.2 ～ 0.9	1 ～ 6	3 ～ 6	0.3 ～ 6	0.5 ～ 5	0.5 ～ 3	0.3 ～ 6	0.1 ～ 3	1 ～ 5.5	0.5 ～ 10	0.1 ～ 3	0.05	0.05 ～ 1.5	0.05 ～ 6	0.05 ～ 6
Blade length (ℓ)(mm)	1.5 ～ 20	0.15 ～ 1.2	1.5 ～ 10	0.15 ～ 1.2	0.2 ～ 6	0.1 ～ 20	0.02 ～ 0.1	0.01 ～ 0.1	0.1 ～ 20	0.2 ～ 12	0.2 ～ 12	0.5 ～ 25	0.1 ～ 10	0.2 ～ 6	0.8 ～ 3.6	0.8 ～ 3.6	3 ～ 15	15 ～ 30	0.45 ～ 24	2.5 ～ 25	2 ～ 12	0.45 ～ 24	0.15 ～ 3.6	3 ～ 15	15 ～ 70	0.2 ～ 30	0.1	0.1 ～ 5	0.1 ～ 20	0.07 ～ 20
Underneck length (ℓ1)(mm)	-	0.5 ～ 5	-	0.3 ～ 5	0.5 ～ 15	-	-	-	-	-	-	-	-	0.5 ～ 15	-	-	-	-	3 ～ 60	-	-	3 ～ 60	0.3 ～ 18	-	-	-	-	-	-	-
Shank diameter (d)(mm)	6 ～ 12	4	6	4	4 ～ 6	4 ～ 12	4	4	4 ～ 12	4 ～ 12	4 ～ 12	3 ～ 10	4 ～ 6	4 ～ 6	3	3	4 ～ 12	6 ～ 12	4 ～ 12	3 ～ 10	4 ～ 6	4 ～ 12	4	-	20	3 ～ 6	4	4	4 ～ 12	4 ～ 12
Number of flutes(sheet)	3	2	3	2	2	2	1	1	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	-	-	-	-	-
Overall Length (L)(mm)	60 ～ 120	50 ～ 52	60 ～ 80	52 ～ 53	35 ～ 45	50 ～ 100	50	45	50 ～ 110	35 ～ 60	50 ～ 110	70 ～ 200	50 ～ 80	50 ～ 60	35	35	60 ～ 110	120 ～ 180	60 ～ 120	100 ～ 250	45 ～ 80	60 ～ 120	50 ～ 70	-	150 ～ 250	45 ～ 130	50	50 ～ 60	50 ～ 100	45 ～ 110
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	-	-	-	-	-
R Precision(μm)	0.01～-0.01	0.003～-0.003 ～ 0.005～-0.005	0.01～-0.01	0.005～-0.005 ～ 3 to -3	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-	0.002～-0.002	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.002～-0.002	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.01～-0.01	0.01～-0.01 ～ 0.02～-0.02	0.02～-0.02	0.01～-0.01	0.02～-0.02	0.01～-0.01	0.01～-0.01	0.05～-0.05 ～ 5 to -5	-0.02 to 0.02 ～ -0.01 to 0.01	-0.02 to 0.02 ～ -0.01 to 0.01	-	-	-	-	-
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface	-	-	-	-	-
Coating	TiAlN	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	TiAlN	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	TiAlN	Non-Coated	DLC	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	-
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	-	-	-	-	-

Configure

Specification/Dimensions

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

0.075

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.275

0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

0.55

0.6

R0.6

0.65

0.7

0.75

R0.75

0.8

0.85

0.9

0.95

1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

3.8

3.85

3.9

3.95

4

4.05

4.1

4.15

4.2

4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.95
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.49
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.7
  - 0.75
  - 0.76
  - 0.8
  - 0.84
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.26
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.5
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
- 8～8.9
  - 8
  - 8.1
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11～11.5
  - 11
  - 11.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 30～30.5
  - 30
  - 30.5
- 31
- 32
- 34
- 35
- 36
- 38
- 40
- 41.5
- 45
- 48
- 50
- 55
- 58
- 60
- 65
- 66
- 70
- 80
- 90
- 100
- 110
- 120
- 130
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.5
  - 0.6
  - 0.75
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.8
  - 1.9
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.8
  - 7
  - 7.5
  - 7.8
- 8
- 9
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 18
- 20
- 21
- 22
- 24
- 25～25.6
  - 25
  - 25.6
- 27～27.6
  - 27
  - 27.6
- 28
- 30
- 31.5～31.6
  - 31.5
  - 31.6
- 32～32.1
  - 32
  - 32.1
- 33.5～33.6
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36～36.1
  - 36
  - 36.1
- 38～38.6
  - 38
  - 38.6
- 39～39.5
  - 39
  - 39.5
- 40
- 41.2～41.4
  - 41.2
  - 41.4
- 42.2
- 43.2
- 44～44.7
  - 44
  - 44.2
  - 44.7
- 45～45.2
  - 45
  - 45.2
- 46.5～46.7
  - 46.5
  - 46.7
- 47.5
- 48～48.7
  - 48
  - 48.7
- 49
- 50～50.7
  - 50
  - 50.7
- 52
- 53
- 54～54.5
  - 54
  - 54.5
- 55
- 57
- 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61.3～61.8
  - 61.3
  - 61.8
- 62.3～62.5
  - 62.3
  - 62.5
- 63～63.3
  - 63
  - 63.3
- 64～64.3
  - 64
  - 64.3
- 65
- 70
- 75
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 102
- 105
- 106
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
Drawing

Clear

Shank diameter (d)(mm)
3

4

5

6

7

8

9

10

11

12

14

15

16

18

20

25

32

42

CN50.8
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6
Clear

Overall Length (L)(mm)
32

34

35

38

40

45

49

50

52

53

55

57

58

60

63

65

70

72

75

78

80

83

85

90

92

100

104

105

110

115

116

120

121

125

130

133

134

140

150

153

155

160

170

175

180

190

200

206

210

220

230

240

250

280

300

330

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

R Precision(μm)
-10～+10

-7 to +3

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003～0.003

-0.003～+0.003

0～-50

0～-40

0～-0.04

0～-0.03

0.002～-0.002

±0.003

+0.003/-0.007

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear

Machining Application
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Type
- Ball
- Long-Neck Ball
- Spherical Ball
Clear

Narrow search by specifying Manufacturer

- MISUMI (30)
- Economy series (0)
- OSG (45)
- NS TOOL (30)
- GUHRING (18)
- DIJET (17)
- NACHI(FUJIKOSHI) (12)
- EIKOSHA (9)
- KYOWA SEIKO (8)
- OKAZAKI SEIKO (6)
- SANKO MFG (6)
- MITSUBISHI HITACHI TOOL (5)
- THE CUT (5)
- ATOM (3)
- 7 LEADERS (2)
- ASAHI TOOLS (2)
- MAPAL (2)
- SANDVIK (2)
- CREATE TOOL (1)
- KYOCERA (1)
- MITSUBISHI MATERIALS (1)
- Poulten&Graf (1)
- SUMITOMO ELECTRIC HARDMETAL (1)
- UNION TOOL (1)
- VAN HOORN (1)
- WIDIN (1)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Ball End Mills (Carbide)

- Ball End Mills (Carbide)
- Long Neck Ball End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

NS TOOL Ball End Mills (Carbide)

Configure

Specification/Dimensions

R Size(mm)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

R Precision(μm)

Machining Application

Coating

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Ball End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

NS TOOL Ball End Mills (Carbide)

Configure

Specification/Dimensions

R Size(mm)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

R Precision(μm)

Machining Application

Coating

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Ball End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB