(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
OSG Roll Taps（work material：Aluminum Alloy Casting (AC, ADC)）
| Days to Ship |
|
|---|
-
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: 16 Day(s) or more -
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series Carbide New Roll Tap OT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: 16 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: 16 Day(s) or more -
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.Days to Ship: Same day or more -
Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.
- STOCK
Days to Ship: 1 Day(s) or more -
UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: 2 Day(s) or more -
Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT
OSG
Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series, X Performer Long Shank LT-S-XPF
OSG
[Specifications]
· Shape: Roll tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]Days to Ship: 16 Day(s) or more -
Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.
Days to Ship: 16 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: 16 Day(s) or more -
Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Days to Ship: 16 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT
OSG
Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT
OSG
Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: 16 Day(s) or more -
Fluteless Tap for Copper_CU-NRT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
Days to Ship: 16 Day(s) or more -
Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.
Days to Ship: 15 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT | Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT | Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT | |||||||||||||
| Days to Ship | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | Same day or more | 1 Day(s) or more | 16 Day(s) or more | 2 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 15 Day(s) or more |
| Specifications |
| ||||||||||||||||||
| Screw size (Nominal) | No.2UN ～ M12 | No.0UN ～ M20 | M3 ～ M12 | No.2UN ～ M12 | M1 ～ M45 | M2.3 ～ M6 | S0.5 ～ S0.9 | M1 ～ M2.3 | M4 | M3 ～ M12 | M8 | No.2UN ～ M3 | M3 ～ M12 | No.2UN ～ M6 | M4 ～ M6 | M3 | M3 ～ M12 | M4 | M1 ～ M20 |
| Screw Types | Meter / unified | Meter / unified | Meter | Meter / unified | Meter | Meter | Miniature | Meter | Meter | Meter | Meter | Meter / unified | Meter | Meter / unified | Meter | Meter | Meter | Meter | Meter |
| work material | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 56 | 0.25 ～ 80 | 0.5 ～ 1.75 | 0.25 ～ 56 | 0.2 ～ 4.5 | 0.4 ～ 1 | .02 ～ 0.225 | 0.25 ～ 0.4 | 0.7 | 0.5 ～ 1.75 | 1.25 | 0.25 ～ 56 | 0.5 ～ 1.75 | 0.25 ～ 56 | 0.7 ～ 1 | 0.5 | 0.5 ～ 1.75 | 0.7 | 0.25 ～ 1.5 |
| Tool Material Type | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | High-speed steel |
| Tap Type | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap |
| Hole type | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole |
| Chamfer threads (Lcf) | 2P ～ 4P | 2P ～ 4P | 2P | 2P ～ 4P | 2P ～ 4P | 2.5P ～ 4P | 2P | 2P | 2P | - | 2P | 2P | 2P ～ 4P | 1P | 8P | 2P | 2P | 2P | 4P |
| Coating Type | TiCN | TiN | Non-Coated | TiCN | TiCN | Non-Coated | CrN | TiCN | Non-Coated | Other | Non-Coated | TiCN | TiN | TiCN | TiCN | TiCN | Non-Coated | CrN | TiN |
| Coating Y/N | Available | Available | NA | Available | Available | NA | Available | Available | NA | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available |
| Overall Length (L)(mm) | 30 ～ 82 | 30 ～ 105 | 46 ～ 82 | 60 ～ 200 | 30 ～ 220 | 42 ～ 62 | 30 | 30 ～ 42 | 52 | 80 ～ 150 | 150 | 30 ～ 46 | 80 ～ 150 | 30 ～ 62 | 52 ～ 62 | 46 | 100 ～ 150 | 52 | 30 ～ 105 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0UN
- No.10
- No.1UN
- No.10UN
- No.10-32UNF
- No.10-24UNC
- No.12
- No.12UN
- No.12-28UNF
- No.12-24UNC
- No.2
- No.2UN
- No.2-64UNF
- No.2-56UNC
- No.3
- No.3UN
- No.3-56UNF
- No.3-48UNC
- No.4
- No.4UN
- No.4-48UNF
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- No.5-44UNF
- No.5-40UNC
- No.6
- No.6UN
- S0.6
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- No.8-36UNF
- No.8-32UNC
- S0.9
- M1
- 1/4
- 1/4UN
- 1/4-28UNF
- 1/4-20UNC
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.5
- M4
- M5
- M6
- No6-40UNF
- M7
- M8
- M9
- M10
- M11
- M12
- M14
- M16
- M18
- M20
- M22
- M24
- M27
- M30
- M33
- M36
- M42
- M45
-
Screw Types
- Meter
- unified
- Miniature
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Steel casting (SC)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy