(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
SUMITOMO ELECTRIC HARDMETAL Cutters / Indexable End Mills（Mounting Method：Arbor）
| Days to Ship |
|
|---|
-
Used for SEC-Sumi Dual Mill, DGC Model DGC-R
SUMITOMO ELECTRIC HARDMETAL
Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.
Days to Ship: 16 Day(s) or more -
RF4000 Type High-Speed Cutter for Aluminum
SUMITOMO ELECTRIC HARDMETAL
High-performance, lightweight cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Days to Ship: 12 Day(s) or more -
Used for SEC-Sumi Dual Mill, DGC Model DGCM-R
SUMITOMO ELECTRIC HARDMETAL
Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.
Days to Ship: 16 Day(s) or more -
WFX-R For SEC-Wave Mill WFX Model
SUMITOMO ELECTRIC HARDMETAL
Screw locked cutter, enabling using 4 corners. Ideal blade shape provides favorable wall precision.
Days to Ship: 10 Day(s) or more -
SEC-Metal Slash Mill MSX Type MSX-R (S)
SUMITOMO ELECTRIC HARDMETAL
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Days to Ship: 16 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Applications]Can be used for side milling, grooving, rough cutting, and medium-rough cutting. [Features]Can be used for machining a wide range of steel materials such as general steel, carbon steel, and stainless steel.
Days to Ship: 10 Day(s) or more -
Used for SEC-Sumi Dual Mill, DGC Model DGCF-R
SUMITOMO ELECTRIC HARDMETAL
Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.
Days to Ship: 16 Day(s) or more -
Used for SEC-Sumi Power Mill, PWS Model PWSF-R
SUMITOMO ELECTRIC HARDMETAL
High reliability corner cutter equipped with a vertical insert that combines high cutting edge strength with a sharp cutting edge.
Days to Ship: 16 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEX-F
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: 10 Day(s) or more -
Used for SEC-Wave Mill, WGC Model WGC(F)-RS
SUMITOMO ELECTRIC HARDMETAL
[Features]
·The high precision of the body and inserts allows for high-quality machining.
·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.Days to Ship: 16 Day(s) or more -
SEC-Wave Mill for WGX Type, WGXM-R(S)
SUMITOMO ELECTRIC HARDMETAL
Dedicated breaker realizes low resistance. For general cutting of steel and cast iron.
Days to Ship: 10 Day(s) or more -
Sumi Boron BN Finish Mill EASY, for FMU Type FMU-R
SUMITOMO ELECTRIC HARDMETAL
[Features]
·This product enables quick blade runout adjustment by external settings.
·It optimizes insert size to reduce running costs.
Work material: Cast Iron
Maximum cutting depth (Ad) (mm): 0.5Days to Ship: 16 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: 16 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
A cutter that achieves high-efficiency machining with a maximum depth of cut of 8 mm, for high-efficiency flat surface machining of cast iron and cast steel.
Days to Ship: 16 Day(s) or more -
Used for SEC-Ace Mill, EHG Model EHG-R
SUMITOMO ELECTRIC HARDMETAL
[Features]
·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.
Maximum cutting depth (Ad) (mm): 5.5
cutting diameter D (⌀): 80, 100, 125, 160, 200Days to Ship: 16 Day(s) or more -
SEC-Wave Mill for WGX Type, WGXF-R(S)
SUMITOMO ELECTRIC HARDMETAL
Dedicated breaker realizes low resistance. For general cutting of steel and cast iron.
Days to Ship: 16 Day(s) or more -
Sumi Boron BN Finish Mill EASY, for FMU-E Type FMU-ER
SUMITOMO ELECTRIC HARDMETAL
[Features]
·A SUMIBORON BN finish mill for high speed finishing.
cutting diameter D (⌀): 37, 47, 60
Number of edges (Pcs.): 2, 3, 4
Weight (kg): 1, 1.2Days to Ship: 16 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
·This BN finish mill provides ultra-high speed milling of gray cast iron.
Work material: Cast Iron
Maximum cutting depth (Ad) (mm): 0.5Days to Ship: 16 Day(s) or more -
SEC-Wave Repeater, WRX2000R Type
SUMITOMO ELECTRIC HARDMETAL
Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead groove and special pocket shape.
Days to Ship: 16 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
·Suitable for side milling and grooving of copper / cast iron / stainless steel.
Maximum cutting depth (Ad) (mm): 18Days to Ship: 12 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
·An ace mill for general cutting of steel and cast iron (slab milling and grooving).
Finish category: coarse / medium coarse milling
Maximum cutting depth (Ad) (mm): 6.5Days to Ship: 16 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
·An ace mill for general cutting (slab milling / grooving / chamfering) of steel, cast iron, and stainless steel.
cutting diameter D (⌀): 80, 105, 125, 157, 200
Maximum cutting depth (Ad) (mm): 9.5Days to Ship: 12 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
[Features]
·An ace mill for general cutting (slab milling / grooving / chamfering) of steel, cast iron, and stainless steel.
Maximum cutting depth (Ad) (mm): 9.5
cutting diameter D (⌀): 6, 8, 10, 12Days to Ship: 16 Day(s) or more -
Aluminum Small Diameter Cutter, SRF Type
SUMITOMO ELECTRIC HARDMETAL
A small, high-performance cutter ideal for machining aluminum components on small-scale apparatus. Simple design with direct insert mounting. The simple fine adjustment mechanism maintains blade runout accuracy.
Days to Ship: 12 Day(s) or more -
SEC-Metal Slash Mill MSX08000R Type
SUMITOMO ELECTRIC HARDMETAL
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Days to Ship: 16 Day(s) or more -
SEC-DNHS 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining
SUMITOMO ELECTRIC HARDMETAL
[Features]
·A cutter with a handle for high efficiency machining of cast iron and cast steel (general steel, carbon steel, steel alloy).
Maximum cutting depth (Ad) (mm): 5Days to Ship: 16 Day(s) or more -
SEC-DNH 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining
SUMITOMO ELECTRIC HARDMETAL
[Features]
·A high efficiency cutter for flat surface machining of cast iron and cast steel (general steel, carbon steel, steel alloy).
Maximum cutting depth (Ad) (mm): 3
cutting diameter D (⌀): 80, 100, 125, 160Days to Ship: 16 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
A cutter that achieves high-efficiency machining with a maximum depth of cut of 8 mm, for high-efficiency flat surface machining of cast iron and cast steel.
Days to Ship: 16 Day(s) or more -
Used for SEC-Sumi UFO Mill, UFO Model UFO-R
SUMITOMO ELECTRIC HARDMETAL
[Features]
Finish category: coarse / medium coarse milling
Rake angle: radial/-7°, axial/27°Days to Ship: 10 Day(s) or more -
Used for SEC-Ace Mill, APG Model APG-R
SUMITOMO ELECTRIC HARDMETAL
[Features]
·An ace mill for general purposes, slab milling, grooving, and chamfering of non-ferrous metals.
Maximum cutting depth (Ad) (mm): 7Days to Ship: 16 Day(s) or more -
Used for SEC-Ace Mill, FPG Model FPG-R/L
SUMITOMO ELECTRIC HARDMETAL
[Features]
·Right-handed or left-handed can be selected.
·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.
Maximum cutting depth (Ad) (mm): 5.5Days to Ship: 12 Day(s) or more -
Used for SEC-Sumi Power Mill, PWC Model PWCF-R
SUMITOMO ELECTRIC HARDMETAL
[Features]
·A multi-flute type Sumi power mill with a high efficiency semi-shoulder for slab milling, side milling, grooving, chamfering, etc., of cast iron.
Maximum cutting depth (Ad) (mm): 15Days to Ship: 16 Day(s) or more -
Used for SEC-Sumi Power Mill, PWC Model PWC-R
SUMITOMO ELECTRIC HARDMETAL
[Features]
・ Vertically-mounted inserts with excellent cutting edge strength and optimized chip breaker achieve both outstanding cutting edge strength and cutting performance.
·This product achieves stable machining with little chattering even with a large tool runout.
·It can be used for a variety of work materials.Days to Ship: 16 Day(s) or more -
Used for SEC-Sumi Power Mill, PWS Model PWS-R
SUMITOMO ELECTRIC HARDMETAL
High reliability corner cutter equipped with a vertical insert that combines high cutting edge strength with a sharp cutting edge.
Days to Ship: 16 Day(s) or more -
Used for SEC-Wave Mill, WFX Model WFXF-R
SUMITOMO ELECTRIC HARDMETAL
Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.
Days to Ship: 12 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEXF-R
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: 16 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEX-R
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: 10 Day(s) or more -
Used for SEC-Wave Mill, WGC Model WGCF-R
SUMITOMO ELECTRIC HARDMETAL
Achieves world class performance and machining precision as a general purpose cutter that is usable in a wide range of applications.
Days to Ship: 10 Day(s) or more -
Used for SEC-Wave Mill, WGC Model WGC-R
SUMITOMO ELECTRIC HARDMETAL
[Features]
·The high precision body and inserts enable high-quality machining, providing both sharpness and strength at a high level.
·The lineup of products with a reinforced small diameter is suitable for machining small accessories.Days to Ship: 12 Day(s) or more -
SEC-Wave Mill for WGX Type, WGX-R(S)
SUMITOMO ELECTRIC HARDMETAL
Dedicated breaker realizes low resistance. For general cutting of steel and cast iron.
Days to Ship: 10 Day(s) or more -
Used for SEC-Wave Radius Mill, WRCX Model WRCXF-RS
SUMITOMO ELECTRIC HARDMETAL
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Days to Ship: 16 Day(s) or more -
Used for SEC-Wave Radius Mill, WRCX Model WRCX-M-Z
SUMITOMO ELECTRIC HARDMETAL
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Days to Ship: 16 Day(s) or more -
SEC-Wave Radius Mill for WRCX Type, WRCX-R (S)
SUMITOMO ELECTRIC HARDMETAL
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Days to Ship: 16 Day(s) or more -
SEC-Wave Repeater for WRX Type, WRX-R (S)
SUMITOMO ELECTRIC HARDMETAL
Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead and special pocket shape.
Days to Ship: 16 Day(s) or more -
SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2
SUMITOMO ELECTRIC HARDMETAL
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Machining Application |
| blade diameter D(φ) |
| work material |
| Finish category |
| Overall length (L)(mm) |
| Number of flutes(sheet) |
| Mounting Method |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Maximum Cutting Depth (Ad)(mm) |
| Compatible Tip Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product Series | SEC-DNHS 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining | SEC-DNH 12000 Type, Cast Iron, Cast Steel for High Efficiency Machining | SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2 | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more |
| Machining Application | Plane / Groove / Chamfer | Plane | Plane / Groove / Chamfer | Plane / Side / Groove | Plane / Groove | Side / Groove | Plane / Groove / Chamfer | Plane / Side / Groove | Plane / Side / Groove | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane | Plane / Side / Groove | Plane | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane | Plane | Plane / Side / Groove | Side / Groove | Plane / Groove | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Side | Plane / Groove | Plane | Plane | Plane | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Side / Groove / Chamfer | Plane / Side / Groove / Chamfer | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Side / Groove | Plane / Side / Groove |
| blade diameter D(φ) | 40(42.9) ～ 250 (252.9) | 80 ～ 200 | 50 (52.9) ～ 250 (252.9) | 50 ～ 250 | 50 ～ 100 | 80 ～ 200 | 50 (52.9) ～ 250 (252.9) | 80 ～ 250 | 40 ～ 63 | 32 ～ 63 | 50 ～ 250 | 80 ～ 200 | 40 ～ 63 | 80 ～ 160 | 80 ～ 200 | 50 ～ 250 | 37 ～ 60 | 80 ～ 160 | 40 ～ 50 | 80 ～ 200 | 80 ～ 200 | 80 ～ 200 | 80 ～ 157 | 30 ～ 63 | 40 | 80 ～ 160 | 80 ～ 160 | 80 ～ 160 | 80 ～ 250 | 80 ～ 315 | 80 ～ 315 | 80 ～ 200 | 80 ～ 200 | 80 ～ 250 | 50 ～ 200 | 80 ～ 125 | 80 ～ 125 | 80 ～ 200 | 80 ～ 200 | 40 ～ 250 | 50 ～ 100 | 40 | 40 ～ 160 | 50 ～ 100 | 50 ～ 125 |
| work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Cast Iron | Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | Aluminum | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron | general steel / Cast Iron | general steel / Cast Iron | general steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Cast Iron | Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | Aluminum |
| Finish category | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing |
| Overall length (L)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of flutes(sheet) | 3 ～ 10 | 6 ～ 12 | 4 ～ 14 | 3 ～ 12 | 3 ～ 6 | 4 ～ 10 | 5 ～ 18 | 6 ～ 14 | 4 ～ 6 | 3 ～ 6 | 4 ～ 14 | 6 ～ 16 | - | 6 ～ 10 | 4 ～ 10 | 5 ～ 24 | 2 ～ 4 | 6 ～ 12 | 10 ～ 16 | 5 ～ 12 | 6 ～ 16 | 4 ～ 10 | 6 ～ 12 | 3 ～ 6 | 4 | 6 ～ 12 | 6 ～ 10 | 8 ～ 12 | 4 ～ 12 | 5 ～ 16 | 4 ～ 14 | 9 ～ 24 | 7 ～ 16 | 4 ～ 12 | 4 ～ 16 | 7 ～ 9 | 4 ～ 6 | 8 ～ 20 | 4 ～ 8 | 3 ～ 10 | 4 ～ 6 | 4 | 3 ～ 6 | 8 ～ 24 | 4 ～ 7 |
| Mounting Method | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor |
| Shank diameter (d)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Cutting Depth (Ad)(mm) | 6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip) | 3 (When using Sumidia Indexable Inserts), 10 (When using super hard tip) | 6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip) | 10 | 1.5 ～ 2.4 | 16 | 6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip) | 16 | 14 | 4 ～ 6 | 6 | 0.5 | 10 | 8 | 5.5 | 6 | 0.5 | 0.5 | 18～36 | 18 | 6.5 | 9.5 | 9.5 | 5 | 1.5 | 5 | 3 | 8 | 5.5 ～ 7.5 | 7 | 5.5 | 15 | 15 | 16 | 10 | 14 | 14 | 6 | 4 ～ 6 | 6 | 6 ～ 8 | 6 | 6 ～ 10 | 27 ～ 53 | 16 ～ 18 |
| Compatible Tip Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Machining Application
-
blade diameter D(φ)
- 6
- 8
- 9
- 10
- 10 mm
- 11
- 12
- 12 mm
- 12mm
- 13.2
- 13.4
- 14
- 14.4
- 15
- 15mm
- 15.4
- 16
- 16 mm
- 16mm
- Cutter Diameter φ16
- 16.2
- 17
- 17.5
- 18
- Cutter Diameter φ18
- 18.2
- 18.4
- 18.5
- 18.6
- 18.9
- 19
- 20
- 20 mm
- 20mm
- Cutter Diameter φ20
- 20.2
- 21
- 21.9
- 22
- Cutter Diameter φ22
- 23
- 23.2
- 23.4
- 23.8
- 24
- 24mm
- 24.1
- 25
- 25 mm
- 25mm
- Cutter Diameter φ25
- 25.5
- 26
- 28
- 28.2
- 30
- 30 mm
- 30mm
- 30.7
- 31
- 32
- 32 mm
- 32mm
- Cutter Diameter φ32
- 33
- 33.4
- 33.5
- 34
- 34.5
- 34.9
- 35
- 35 mm
- 35mm
- 35.5
- 35.9
- 36
- 36.0 mm
- 37
- 38
- Cutter Diameter φ38
- 38.2
- 39
- 39.8
- 40
- 40 mm
- 40mm
- Cutter Diameter φ40
- 40(42.9)
- 41
- 42
- 42 mm
- 42.0 mm
- 42mm
- 43
- 44
- 44 mm
- 44mm
- 45
- 46
- 46.4
- 47
- 48
- 48.7
- 48.8
- 49
- 50
- 50 mm
- 50mm
- Cutter Diameter φ50
- 50 (52.9)
- 51
- 51.2
- 52
- 52.0 mm
- 52mm
- 53
- 54
- 54mm
- 54.08mm
- 54.5
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 61.7
- 62
- 62.5mm
- 63
- 63 mm
- 63mm
- Cutter Diameter φ63
- 63 (65.9)
- 63.2
- 63.4
- 63.5
- 63.8
- 64
- 64.08mm
- 65
- 66
- 66.0 mm
- 66mm
- 68
- 69.5
- 69.7mm
- 70
- 75
- 75.5mm
- 76.2
- 77.08mm
- 78.08mm
- 78.7
- 80
- 80 mm
- 80mm
- Cutter Diameter φ80
- 80 (82.9)
- 83.4
- 84
- 84.0 mm
- 84mm
- 86.7mm
- 88
- 89.4
- 90
- 92.5mm
- 94.08mm
- 96
- 98.7
- 98.8mm
- 100
- 100mm
- Cutter Diameter φ100
- 100 (102.9)
- 101.3mm
- 101.6
- 105
- 106.7mm
- 109
- 110
- 112.5mm
- 114.08mm
- 116
- 118.8mm
- 123.7
- 125
- 125mm
- Cutter Diameter φ125
- 125 (127.9)
- 127
- 130
- 131.4mm
- 131.7mm
- 137.5mm
- 138.8mm
- 139.08mm
- 140
- 141
- 150
- 152.4
- 157
- 160
- 160mm
- 160 mm
- 160 (162.9)
- 166.7mm
- 172.5mm
- 174.08mm
- 178.8mm
- 200
- 200mm
- 200 (202.9)
- 212.5mm
- 218.8mm
- 250
- 250mm
- 250 (252.9)
- 262.5mm
- 268.8mm
- 315
- Cutter Diameter φ563
-
work material
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
26～27
- 26
- 27
-
32～38
- 32
- 33
- 35
- 38
-
40～49.5
- 40
- 40$40.7
- 42
- 43
- 45
- 47
- 49
- 49.5
-
50～57
- 50
- 50$50.7
- 55
- 56
- 57
-
60～69
- 60
- 63
- 63$63.7
- 68
- 69
-
70～79
- 70
- 73
- 74
- 75
- 76
- 77.7
- 78
- 79
-
80～88
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
-
90～98.7
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 107
- 108
- 109
-
110～117
- 110
- 111
- 112
- 113
- 115
- 117
-
120～128
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 127
- 128
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～145
- 140
- 141
- 143
- 144
- 145
-
150～158
- 150
- 155
- 158
-
160～166
- 160
- 161
- 165
- 166
-
170～178
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 178
-
180～188
- 180
- 181
- 182
- 184
- 184.6
- 185
- 186
- 188
-
190～194
- 190
- 191
- 192
- 192.5
- 194
-
200～208.5
- 200
- 204
- 205.5
- 206
- 207
- 208
- 208.5
-
210～219
- 210
- 212
- 213
- 214
- 215
- 216
- 218
- 219
-
220～228
- 220
- 221
- 222
- 223.8
- 224
- 225
- 226
- 228
-
230～238
- 230
- 231
- 232
- 234
- 235
- 236
- 237
- 238
-
240～246
- 240
- 242
- 243.8
- 245
- 246
-
250～259
- 250
- 253
- 254
- 256
- 257
- 258
- 259
-
260～268
- 260
- 262
- 265
- 266
- 266.8
- 268
-
270～278
- 270
- 271
- 272
- 274
- 275
- 277
- 278
-
280～289
- 280
- 281
- 283
- 284
- 286
- 287
- 288
- 289
-
290～298
- 290
- 292
- 295
- 296
- 296.8
- 297
- 298
-
300～308
- 300
- 301
- 302
- 304
- 306
- 307
- 308
-
310～318
- 310
- 312
- 314
- 316
- 317
- 318
-
320～328
- 320
- 322
- 324
- 326
- 327
- 328
-
330～338
- 330
- 331.8
- 332
- 336
- 337
- 338
-
340～348
- 340
- 342
- 344
- 346
- 347
- 348
-
350～358
- 350
- 352
- 354
- 356
- 357
- 358
-
360～368
- 360
- 361
- 362
- 364
- 366
- 367
- 368
-
370～377
- 370
- 372
- 374
- 377
-
382～387
- 382
- 387
-
392～397
- 392
- 397
-
402～407
- 402
- 407
-
412～417
- 412
- 417
-
422～427
- 422
- 427
-
431
-
-
Number of flutes(sheet)
-
Mounting Method
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Maximum Cutting Depth (Ad)(mm)
-
Compatible Tip Material
Narrow search by specifying Manufacturer
-
- MISUMI (1)
- SUMITOMO ELECTRIC HARDMETAL (48)
- OSG (15)
- MITSUBISHI HITACHI TOOL (13)
- SANDVIK (13)
- DIJET (7)
- TUNGALOY (3)
- ASAHI TOOLS (2)
- BIG DAISHOWA SEIKI (1)
- KYOCERA (0)
- ESCO (0)
- ISCAR (0)
- THE CUT (0)
- MITSUBISHI MATERIALS (0)
- NACHI(FUJIKOSHI) (0)
- NGK SPARK PLUG (0)
- FUJIGEN (0)
CAD
-
- 2D
- 3D
Related Categories to Cutters / Indexable End Mills
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy