(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

UNION TOOL Long Neck Square End Mills (Carbide)（Type：Square）

12 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less

HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]

UNION TOOL

[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications

Days to Ship: 12 Day(s) or more
C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]

UNION TOOL

[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performance

Days to Ship: 12 Day(s) or more
C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]

UNION TOOL

[Features]
· C-CES: 2-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performance

Days to Ship: 16 Day(s) or more
C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]

UNION TOOL

[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performance

Days to Ship: 12 Day(s) or more
C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]

UNION TOOL

[Features]
· C-CES: 4-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performance

Days to Ship: 16 Day(s) or more
CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]

UNION TOOL

[Features]
· End Mill for Aluminum Machining
· Adopts 45° torsion for a blade shape with excellent sharpness and chip discharge

Days to Ship: 12 Day(s) or more
CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]

UNION TOOL

[Features]
· End Mill Dedicated for Graphite Machining
· Adopts a carbide base material with excellent wear resistance
· The shape helps prevent chipping

Days to Ship: 13 Day(s) or more
CPS 2-Flute Square for Resin Machining [Alteration Supported Product]

UNION TOOL

[Features]
· Medium Blade Length End Mill for Resin Processing
· Unique blade shape
· Blade Length = 3x Outer Diameter (Some 1.5x/2x)
· An excellent machined surface can be obtained, even for long resin protrusion machining

Days to Ship: 13 Day(s) or more
CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]

UNION TOOL

[Features]
· CrN coating, which is effective in copper cutting, achieves a longer operating life
· The blade design dedicated for copper achieves excellent cutting quality

Days to Ship: 12 Day(s) or more
CRN-ES4000 For Copper Electrode Processing, 4-Flute, Square

UNION TOOL

[Features]
· CrN coating, which is effective in copper cutting, achieves a longer operating life
· The blade design dedicated for copper achieves excellent cutting quality
· O.D. Tolerance: 0/-0.02 (D ≤ 6), 0/-0.03 (D ≥ 8)

Days to Ship: 12 Day(s) or more
DIA Coated Series, for Graphite Processing, DCES2000, 2-Flute Square

UNION TOOL

[Features]
· 2-Flute Diamond Coated End Mill for Graphite Electrode Machining
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product life

Days to Ship: 13 Day(s) or more
DIA Coated Series DCES4000 4-Flute Square for Cutting Graphite

UNION TOOL

[Features]
· 4-Flute Diamond Coated End Mill for Graphite Electrode Machining
· The newly developed diamond coating film achieves outstanding wear resistance
· Adopts a highly adhesive coating film for longer product life

Days to Ship: 16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	13 Day(s) or more

Days to Ship:	13 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	13 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL
Product Series	HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]	C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]	C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]	C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]	C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]	CAS, 2-Flutes Square for Aluminum Processing [Alteration Supported Product]	CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]	CPS 2-Flute Square for Resin Machining [Alteration Supported Product]	CRN-ES2000, for Copper Electrode Cutting, 2-Flute Square [Alteration Supported Product]	CRN-ES4000 For Copper Electrode Processing, 4-Flute, Square	DIA Coated Series, for Graphite Processing, DCES2000, 2-Flute Square	DIA Coated Series DCES4000 4-Flute Square for Cutting Graphite
Days to Ship	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	13 Day(s) or more	13 Day(s) or more	12 Day(s) or more	12 Day(s) or more	13 Day(s) or more	16 Day(s) or more
Blade diameter (D)(φ)	1 ～ 12	0.1 ～ 20	0.2 ～ 12	1 ～ 20	1 ～ 12	0.5 ～ 12	2 ～ 20	0.3 ～ 12	0.2 ～ 12	3 ～ 12	0.2 ～ 6	3 ～ 10
Blade length (ℓ)(mm)	2.5 ～ 56	0.15 ～ 48	0.3 ～ 36	2.5 ～ 50	2.5 ～ 26	0.75 ～ 30	15 ～ 70	0.9 ～ 36	0.6 ～ 40	9 ～ 36	0.6 ～ 18	9 ～ 30
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	4 ～ 12	3 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	3 ～ 20	3 ～ 12	4 ～ 12	6 ～ 12	4 ～ 6	6 ～ 10
Number of flutes(sheet)	3 ～ 6	2	2	4	4	2	4	2	2	4	4	4
Overall Length (L)(mm)	45 ～ 120	38 ～ 110	45 ～ 90	45 ～ 110	45 ～ 75	45 ～ 90	60 ～ 200	45 ～ 100	40 ～ 100	50 ～ 100	45 ～ 60	50 ～ 90
work material	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	Aluminum[◎] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	For High Hardness (Silicon Group)	TiCN	TiCN	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	CrN	CrN	Dia Coat	Dia Coat
Blade tip shape	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge	With Lead	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.1～0.95
  - 0.1
  - 0.15
  - 0.2
  - 0.25
  - 0.3
  - 0.35
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.95
  - 1
  - 1.05
  - 1.1
  - 1.15
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.45
  - 1.5
  - 1.55
  - 1.6
  - 1.65
  - 1.7
  - 1.75
  - 1.8
  - 1.85
  - 1.9
  - 1.95
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.5
  - 10
  - 10.5
- 11～11.5
  - 11
  - 11.5
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
- 35
- 40
- 45
- 50
Drawing

Clear

Blade length (ℓ)(mm)
- 0.08～0.9
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.2
  - 0.25
  - 0.3
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.8
  - 4
  - 4.2
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.8
  - 7
  - 7.2
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.6
  - 9.8
  - 9.9
- 10～10.8
  - 10
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.9
  - 12
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.2
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.4
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.6
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.8
- 17～17.7
  - 17
  - 17.1
  - 17.2
  - 17.4
  - 17.5
  - 17.6
  - 17.7
- 18～18.8
  - 18
  - 18.4
  - 18.8
- 19～19.6
  - 19
  - 19.2
  - 19.6
- 20～20.8
  - 20
  - 20.4
  - 20.5
  - 20.8
- 21～21.6
  - 21
  - 21.2
  - 21.6
- 22～22.8
  - 22
  - 22.4
  - 22.5
  - 22.8
- 23～23.6
  - 23
  - 23.2
  - 23.6
- 24
- 25
- 26
- 27～27.5
  - 27
  - 27.5
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 38
- 40
- 42
- 44
- 45
- 46
- 48
- 50
- 53
- 55
- 56
- 60
- 64
- 65
- 70
- 75
- 80
- 85
- 100
- 115
- 125
- 130
- 150
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.3～0.8
  - 0.3
  - 0.5
  - 0.75
  - 0.8
- 1～1.5
  - 1
  - 1.5
- 2～2.5
  - 2
  - 2.5
- 3～3.5
  - 3
  - 3.5
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.5
- 9
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13.5
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 29
- 30
- 32
- 35
- 36
- 38
- 39
- 40
- 42
- 45
- 48
- 50
- 52
- 53
- 55
- 60
- 62
- 63
- 70
- 75
- 76
- 80
Drawing

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

17

18

20

25

32

42
Drawing

Clear

Number of flutes(sheet)
2

3

4

6

8
Clear

Overall Length (L)(mm)
35

38

40

45

50

55

57

60

63

64

65

70

72

75

76

80

83

85

89

90

92

93

95

100

104

105

108

110

115

120

125

126

130

140

150

160

170

180

185

200

215

220

230

240

250

265
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Torsion Angle (θ)
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Variable lead
- IKOU
Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
Images

Clear

Type
- Square
- Long-Neck Square
- High Helical
Clear

Narrow search by specifying Manufacturer

- MISUMI (1)
- Economy series (0)
- UNION TOOL (12)
- KYOWA SEIKO (1)
- NS TOOL (1)
- SANDVIK (0)
- Poulten&Graf (0)
- OSG (0)
- OKAZAKI SEIKO (0)
- KYOCERA (0)
- GUHRING (0)
- VAN HOORN (0)
- DIJET (0)
- WIDIN (0)
- NACHI(FUJIKOSHI) (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Long Neck Square End Mills (Carbide)

- Square End Mills (Carbide)
- Long Neck Square End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

UNION TOOL Long Neck Square End Mills (Carbide)（Type：Square）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Long Neck Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

UNION TOOL Long Neck Square End Mills (Carbide)（Type：Square）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Long Neck Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB