(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts(End Shape (Right):Tapped)

Basic Shape

  • Solid
  • One End Stepped
  • Both Ends Stepped
  • Hollow
  • Hollow, One End Stepped
  • Hollow, Both Ends Stepped
  1. 1
Brand
Product Series
CAD
Days to Ship
Basic Shape
End Shape (Left)
End Shape (Right)
Clamping Tool Type
Shaft End Perpendicularity
Material
Heat Treatment
Surface Treatment
Shaft Dia. D(Ø)
Shaft Fits

    Linear Shafts-Both Ends Tapped

      Linear Shafts - Shaft Ends Configurable

        Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole

          (Economy series) Guide Shafts Both Ends Tapped with Wrench Slot

            Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type

              Linear Shafts-One End Stepped, Both Ends Female Thread-

                Linear Shafts-One Ends Threaded

                  Linear Shafts-Both Ends Stepped and Female Thread-

                    (Economy series) Guide Shafts Both Ends Tapped

                      Linear Shafts-One End Threaded One End Tapped

                        High Precision Linear Shafts-Both Ends Tapped / Both Ends Tapped with Wrench Flats

                          Precision Linear Shafts - Fully Plated Straight Type

                            Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

                              Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short

                                Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats

                                  High Precision Linear Shafts - One End Threaded One End Tapped / One End Threaded One End Tapped with Wrench Flats

                                    High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

                                      Linear Shafts-Both Ends Stepped and Female Thread with Wrench Flats-

                                        Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded

                                          Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

                                            High Precision Linear Shafts - Both Ends Stepped and Tapped / Both Ends Stepped and Tapped with Wrench Flats

                                              High Precision Linear Shafts - One End Threaded One End Tapped with Undercut / One End Threaded One End Tapped with Undercut and Wrench Flats

                                                Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut

                                                  Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type

                                                    Linear Shafts - One End Threaded / One End Tapped Hollow

                                                      Linear Shafts - One End Stepped / One End Tapped Hollow

                                                        High Precision Linear Shafts - One End Stepped, Both Ends Tapped / One End Stepped, Both Ends Tapped with Wrench Flats

                                                          [Clean & Pack] Shaft - Both Ends Tapped

                                                            [Clean & Pack] Shaft - Both Ends Tapped with Wrench Flats

                                                              [Clean & Pack] Shaft - One End Threaded and One End Tapped

                                                              Brand

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MiSUMi Economy

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MiSUMi Economy

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              MISUMI

                                                              Product Series

                                                              Linear Shafts-Both Ends Tapped

                                                              Linear Shafts - Shaft Ends Configurable

                                                              Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole

                                                              (Economy series) Guide Shafts Both Ends Tapped with Wrench Slot

                                                              Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type

                                                              Linear Shafts-One End Stepped, Both Ends Female Thread-

                                                              Linear Shafts-One Ends Threaded

                                                              Linear Shafts-Both Ends Stepped and Female Thread-

                                                              (Economy series) Guide Shafts Both Ends Tapped

                                                              Linear Shafts-One End Threaded One End Tapped

                                                              High Precision Linear Shafts-Both Ends Tapped / Both Ends Tapped with Wrench Flats

                                                              Precision Linear Shafts - Fully Plated Straight Type

                                                              Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

                                                              Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short

                                                              Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats

                                                              High Precision Linear Shafts - One End Threaded One End Tapped / One End Threaded One End Tapped with Wrench Flats

                                                              High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

                                                              Linear Shafts-Both Ends Stepped and Female Thread with Wrench Flats-

                                                              Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded

                                                              Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

                                                              High Precision Linear Shafts - Both Ends Stepped and Tapped / Both Ends Stepped and Tapped with Wrench Flats

                                                              High Precision Linear Shafts - One End Threaded One End Tapped with Undercut / One End Threaded One End Tapped with Undercut and Wrench Flats

                                                              Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut

                                                              Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type

                                                              Linear Shafts - One End Threaded / One End Tapped Hollow

                                                              Linear Shafts - One End Stepped / One End Tapped Hollow

                                                              High Precision Linear Shafts - One End Stepped, Both Ends Tapped / One End Stepped, Both Ends Tapped with Wrench Flats

                                                              [Clean & Pack] Shaft - Both Ends Tapped

                                                              [Clean & Pack] Shaft - Both Ends Tapped with Wrench Flats

                                                              [Clean & Pack] Shaft - One End Threaded and One End Tapped

                                                              CAD
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              • 2D / 3D
                                                              Days to Ship 3 Day(s) or more 12 Day(s) or more 3 Day(s) or more 10 Day(s) 3 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 10 Day(s) 4 Day(s) or more 10 Day(s) or more 12 Day(s) or more 4 Day(s) or more 4 Day(s) or more 10 Day(s) or more 12 Day(s) or more 12 Day(s) or more 4 Day(s) or more 4 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 4 Day(s) or more 4 Day(s) or more 10 Day(s) or more 10 Day(s) or more 12 Day(s) or more 13 Day(s) or more 13 Day(s) or more 14 Day(s) or more
                                                              Basic ShapeSolidSolid / One End Stepped / Both Ends SteppedSolidSolidSolidOne End SteppedSolidBoth Ends SteppedSolidSolidSolidSolidOne End SteppedSolidHollowSolidOne End SteppedBoth Ends SteppedSolid / One End SteppedHollow / Hollow, One End Stepped / Hollow, Both Ends SteppedBoth Ends SteppedSolidSolidOne End SteppedHollowHollow, One End SteppedOne End SteppedSolidSolidSolid
                                                              End Shape (Left)TappedNo Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped / Hex Socket / TaperedTappedTappedThreadedNo Machining / TappedThreadedTappedTappedThreadedTappedTappedTappedTappedTappedThreadedThreadedTappedTaperedNo Machining / Tapped / Threaded / With Retaining Ring GroovesTappedThreadedThreadedThreadedThreadedNo MachiningTappedTappedTappedThreaded
                                                              End Shape (Right)TappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTappedTapped
                                                              Clamping Tool Type------------------------------
                                                              Shaft End PerpendicularityPerpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)-Perpendicularity (0.03)Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)-Perpendicularity (0.03)Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)--Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)
                                                              MaterialStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelS45CStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelS45CStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelSteelSteelStainless Steel ~ SteelStainless Steel ~ SteelSteelSteel
                                                              Heat TreatmentNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot ProvidedNot Provided
                                                              Surface TreatmentNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingElectroless Nickel PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingHard Chrome PlatingHard Chrome Plating
                                                              Shaft Dia. D(Ø)4 ~ 506 ~ 506 ~ 506 ~ 508 ~ 508 ~ 506 ~ 508 ~ 505 ~ 504 ~ 504 ~ 308 ~ 508 ~ 506 ~ 206 ~ 505 ~ 304 ~ 308 ~ 506 ~ 206 ~ 508 ~ 308 ~ 308 ~ 508 ~ 506 ~ 406 ~ 508 ~ 304 ~ 506 ~ 506 ~ 50
                                                              Shaft Fitsh5 ~ f8h5 ~ g6h5 ~ f8g7h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8g7h5 ~ f8g6g6h5 ~ f8g6g6g6g6h5 ~ f8h5 ~ g6g6g6g6h5 ~ f8h5 ~ f8g6g6g6h5 ~ f8f8f8

                                                              Loading...

                                                              1. 1

                                                              Related Categories to Linear Shafts