(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts(End Shape (Left):Threaded)

Basic Shape

  • Solid
  • One End Stepped
  • Both Ends Stepped
  • Hollow
  • Hollow, One End Stepped
  • Hollow, Both Ends Stepped
  1. 1
Brand
Product Series
CAD
Days to Ship
Basic Shape
End Shape (Left)
End Shape (Right)
Clamping Tool Type
Shaft End Perpendicularity
Material
Heat Treatment
Surface Treatment
Shaft Dia. D(Ø)
Shaft Fits

    Linear Shafts - Shaft Ends Configurable

      Linear Shafts-Both Ends Threaded

        Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type

          Linear Shafts-One Ends Threaded

            Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

              Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

                Linear Shafts-One End Threaded One End Tapped

                  Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole

                    Precision Linear Shafts - Fully Plated Straight Type

                      Linear Shafts One End Threaded with Undercut

                        High Precision Linear Shafts - One End Threaded One End Tapped / One End Threaded One End Tapped with Wrench Flats

                          Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

                            Linear Shafts-One End Threaded

                              High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

                                High Precision Linear Shafts - Both Ends Threaded / Both Ends Threaded with Wrench Flats

                                  Linear Shafts - Set Screw Grooved

                                    Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-

                                      Linear Shafts High-Both Ends Male Thread with Thread Dia. Equal to Shaft Dia.-

                                        High Precision Linear Shafts - One End Threaded / One End Threaded with Wrench Flats

                                          Linear Shafts - One End Two Tapped Holes - Solid Type / One End Tapped Type / One End Stepped and Tapped Type / Threaded Type

                                            Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

                                              Precision Linear Shafts - Both Ends Male Thread with Undercut

                                                High Precision Linear Shafts - One End Threaded One End Tapped with Undercut / One End Threaded One End Tapped with Undercut and Wrench Flats

                                                  Shafts - One End Threaded Hollow Shafts - One End Threaded Hollow Shafts with Wrench Flats / One End Threaded Hollow Shafts

                                                    Linear Shafts - Hex Socket -Tapped Type / Threaded Type / Stepped and Tapped Type

                                                      Linear Shafts - Both Ends Threaded Hollow

                                                        Shafts - Tapped Pilot Type

                                                          Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut

                                                            High Precision Linear Shafts - One End Threaded with Undercut / Wrench Flats

                                                              Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

                                                                Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type

                                                                  Linear Shafts - One End Threaded / One End Tapped Hollow

                                                                    High Precision Linear Shafts - Both Ends Threaded with Undercuts / Both Ends Threaded with Undercuts and Wrench Flats

                                                                      [Clean & Pack] Shaft - Both Ends Threaded with Undercut

                                                                        [Clean & Pack] Shaft - One End Threaded and One End Tapped

                                                                          [Clean & Pack] Shaft - Both Ends Threaded with Wrench Flats

                                                                            [Clean & Pack] Shaft - One End Threaded

                                                                              [Clean & Pack] Shaft - One End Threaded with Wrench Flats

                                                                                [Clean & Pack] Shaft - One End Threaded with Undercut and Wrench Flats

                                                                                Brand

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                MISUMI

                                                                                Product Series

                                                                                Linear Shafts - Shaft Ends Configurable

                                                                                Linear Shafts-Both Ends Threaded

                                                                                Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type

                                                                                Linear Shafts-One Ends Threaded

                                                                                Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

                                                                                Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

                                                                                Linear Shafts-One End Threaded One End Tapped

                                                                                Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole

                                                                                Precision Linear Shafts - Fully Plated Straight Type

                                                                                Linear Shafts One End Threaded with Undercut

                                                                                High Precision Linear Shafts - One End Threaded One End Tapped / One End Threaded One End Tapped with Wrench Flats

                                                                                Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

                                                                                Linear Shafts-One End Threaded

                                                                                High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

                                                                                High Precision Linear Shafts - Both Ends Threaded / Both Ends Threaded with Wrench Flats

                                                                                Linear Shafts - Set Screw Grooved

                                                                                Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                                Linear Shafts High-Both Ends Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                                High Precision Linear Shafts - One End Threaded / One End Threaded with Wrench Flats

                                                                                Linear Shafts - One End Two Tapped Holes - Solid Type / One End Tapped Type / One End Stepped and Tapped Type / Threaded Type

                                                                                Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

                                                                                Precision Linear Shafts - Both Ends Male Thread with Undercut

                                                                                High Precision Linear Shafts - One End Threaded One End Tapped with Undercut / One End Threaded One End Tapped with Undercut and Wrench Flats

                                                                                Shafts - One End Threaded Hollow Shafts - One End Threaded Hollow Shafts with Wrench Flats / One End Threaded Hollow Shafts

                                                                                Linear Shafts - Hex Socket -Tapped Type / Threaded Type / Stepped and Tapped Type

                                                                                Linear Shafts - Both Ends Threaded Hollow

                                                                                Shafts - Tapped Pilot Type

                                                                                Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut

                                                                                High Precision Linear Shafts - One End Threaded with Undercut / Wrench Flats

                                                                                Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

                                                                                Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type

                                                                                Linear Shafts - One End Threaded / One End Tapped Hollow

                                                                                High Precision Linear Shafts - Both Ends Threaded with Undercuts / Both Ends Threaded with Undercuts and Wrench Flats

                                                                                [Clean & Pack] Shaft - Both Ends Threaded with Undercut

                                                                                [Clean & Pack] Shaft - One End Threaded and One End Tapped

                                                                                [Clean & Pack] Shaft - Both Ends Threaded with Wrench Flats

                                                                                [Clean & Pack] Shaft - One End Threaded

                                                                                [Clean & Pack] Shaft - One End Threaded with Wrench Flats

                                                                                [Clean & Pack] Shaft - One End Threaded with Undercut and Wrench Flats

                                                                                CAD
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                • 2D / 3D
                                                                                Days to Ship 12 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 12 Day(s) or more 4 Day(s) or more 12 Day(s) or more 4 Day(s) or more 4 Day(s) or more 12 Day(s) or more 12 Day(s) or more 10 Day(s) or more 4 Day(s) or more 4 Day(s) or more 12 Day(s) or more 10 Day(s) or more 12 Day(s) or more 4 Day(s) or more 12 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 4 Day(s) or more 12 Day(s) or more 4 Day(s) or more 4 Day(s) or more 10 Day(s) or more 12 Day(s) or more 14 Day(s) or more 14 Day(s) or more 14 Day(s) or more 14 Day(s) or more 14 Day(s) or more 14 Day(s) or more
                                                                                Basic ShapeSolid / One End SteppedSolidSolidSolidSolidOne End Stepped / Both Ends SteppedSolidSolidSolidSolid / One End SteppedSolidSolidSolidOne End Stepped / Both Ends SteppedSolidSolidSolidSolidSolidSolidHollow / Hollow, One End SteppedSolidSolidHollowSolidHollowSolidSolidSolidSolidOne End SteppedHollowSolidSolidSolidSolidSolidSolidSolid
                                                                                End Shape (Left)ThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreadedThreaded
                                                                                End Shape (Right)No Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped Hole / Hex Socket / TaperedThreadedTappedTappedThreadedNo Machining / ThreadedTappedNo MachiningNo Machining / Threaded / TaperedNo MachiningTappedNo MachiningNo MachiningNo Machining / Tapped / ThreadedThreadedSet Screw GroovedNo MachiningThreadedNo MachiningTapped HoleNo Machining / Tapped / Threaded / With Retaining Ring GroovesThreadedTappedNo MachiningHex SocketThreadedTapped PilotTappedNo MachiningThreadedTappedTappedThreadedThreadedTappedThreadedNo MachiningNo MachiningNo Machining
                                                                                Clamping Tool Type---------------------------------------
                                                                                Shaft End PerpendicularityPerpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)Perpendicularity (0.2)-Perpendicularity (0.2)Perpendicularity (0.03)-Perpendicularity (0.2)-Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)-Perpendicularity (0.03)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)
                                                                                MaterialStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelSteelSteelSteelSteelSteelSteel
                                                                                Heat TreatmentInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedNot ProvidedNot ProvidedNot ProvidedNot ProvidedNot ProvidedNot Provided
                                                                                Surface TreatmentNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingElectroless Nickel PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingHard Chrome PlatingHard Chrome PlatingHard Chrome PlatingHard Chrome PlatingHard Chrome PlatingHard Chrome Plating
                                                                                Shaft Dia. D(Ø)6 ~ 504 ~ 508 ~ 506 ~ 506 ~ 508 ~ 504 ~ 508 ~ 508 ~ 508 ~ 505 ~ 306 ~ 504 ~ 504 ~ 305 ~ 306 ~ 303 ~ 303 ~ 305 ~ 3015 ~ 506 ~ 508 ~ 508 ~ 306 ~ 406 ~ 206 ~ 4012 ~ 308 ~ 508 ~ 308 ~ 508 ~ 506 ~ 408 ~ 308 ~ 506 ~ 506 ~ 506 ~ 506 ~ 508 ~ 50
                                                                                Shaft Fitsh5 ~ g6h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8g6h5 ~ f8g6h5 ~ f8h5 ~ f8g6g6g6h5 ~ f8h5 ~ f8g6g6g6h5 ~ f8g6g6g6g6g6h5 ~ f8g6h5 ~ f8h5 ~ f8g6g6f8f8f8f8f8f8

                                                                                Loading...

                                                                                1. 1

                                                                                Related Categories to Linear Shafts