(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Spline Shaft（Shaft material：SUJ2 Equivalent）
Nut Type
-
Key Provided Type -
Flanged Type
-
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 20 Day(s) or more -
Ball Splines - One End Stepped and Threaded, One End Tapped
MISUMI
A ball spline with a stepped male thread on one end and a female thread on the other end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 21 Day(s) or more -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
MISUMI
ball spline with a female thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 21 Day(s) or more -
Ball Splines - One End Stepped
MISUMI
A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 21 Day(s) or more -
Days to Ship: 10 Day(s) -
Ball Splines - Both Ends Stepped and Threaded
MISUMI
A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 21 Day(s) or more -
Ball Splines - Both Ends Tapped
MISUMI
This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 21 Day(s) or more -
Ball Splines - Both Ends Stepped Tapped
MISUMI
ball spline with stepped female threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 21 Day(s) or more -
Ball Splines - One End Stepped and Threaded
MISUMI
ball spline with a stepped male thread on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.Days to Ship: 21 Day(s) or more -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s) -
Days to Ship: 10 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Nut Type |
| Spline Shaft Outer Dia. D(Ø) |
| Type |
| Nut Length |
| Nut Overall Length L1(mm) |
| Nut Outer Dia. D1(Ø) |
| Preload |
| Accuracy Grade |
| End Shape (Left) |
| End Shape (Right) |
| Torque |
| Shaft material |
| Number of Nuts(pc(s).) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Ball Splined-Hollow Type, Key Provided Straight Nut, Both Ends Tapped | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded / One End Tapped | Ball Splines Round Flanged, One End Double Stepped and Threaded / One End Tapped | Ball Splines Key Provided Straight Nut, One End Double Stepped and Threaded | Ball Splines Round Flanged, One End Double Stepped and Threaded | Ball Splined-Hollow Type, Key Provided Straight Nut, One End Tapped | ||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 10 Day(s) | 10 Day(s) | 20 Day(s) or more | 21 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 21 Day(s) or more | 21 Day(s) or more | 10 Day(s) | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 21 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) |
| Nut Type | Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Key Provided Type / Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type | Flanged Type |
| Spline Shaft Outer Dia. D(Ø) | 16 ～ 30 | 13 ～ 30 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 13 ～ 30 | 16 ～ 30 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 6 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30.8 | 6 ～ 30.8 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 8 ～ 30 | 16 ～ 30 | 16 ～ 30 |
| Type | Hollow | Hollow | Solid | Solid | Solid | Solid | Hollow | Hollow | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Solid | Hollow | Hollow |
| Nut Length | - | - | Standard | Standard | - | - | - | - | Standard | Standard | - | Standard | Standard | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nut Overall Length L1(mm) | - | - | 25 ～ 80 | 25 ～ 80 | - | - | - | - | 25 ～ 80 | 25 ～ 80 | - | 25 ～ 80 | 25 ～ 80 | 25 ～ 80 | 25 ～ 80 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nut Outer Dia. D1(Ø) | - | - | 14 ～ 47 | 14 ～ 47 | - | - | - | - | 14 ～ 47 | 14 ～ 47 | - | 14 ～ 47 | 14 ～ 47 | 16 ～ 47 | 14 ～ 47 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Preload | - | - | Standard | Standard | - | - | - | - | Standard | Standard | - | Standard | Standard | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Accuracy Grade | - | - | Standard Grade | Standard Grade | - | - | - | - | Standard Grade | Standard Grade | - | Standard Grade | Standard Grade | Standard Grade | Standard Grade | - | - | - | - | - | - | - | - | - | - | - | - | - |
| End Shape (Left) | Tapped | Standard | Standard | Stepped and Threaded | Standard | Stepped | Standard | Tapped | Tapped | Stepped | Standard | Stepped and Threaded | Tapped | Stepped and Tapped | Stepped and Threaded | Tapped | Tapped | Tapped | Tapped | Stepped | Stepped | Stepped | Stepped and Threaded | Stepped and Threaded | Stepped and Threaded | Stepped and Threaded | Tapped | Tapped |
| End Shape (Right) | Tapped | Standard | Standard | Tapped | Standard | Stepped | Standard | Tapped | Standard | Standard | Standard | Stepped and Threaded | Tapped | Stepped and Tapped | Standard | Tapped | Tapped | Standard | Standard | Stepped | Standard | Standard | Tapped | Tapped | Standard | Standard | Standard | Standard |
| Torque | - | - | Middle Torque | Middle Torque | - | - | - | - | Middle Torque | Middle Torque | - | Middle Torque | Middle Torque | Middle Torque | Middle Torque | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft material | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent | SUJ2 Equivalent |
| Number of Nuts(pc(s).) | - | - | 1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Spline Shaft Outer Dia. D(Ø)
-
Type
- Solid
- Hollow
- Polygonal
-
Nut Length
-
Nut Overall Length L1(mm)
-
Nut Outer Dia. D1(Ø)
-
Preload
-
Accuracy Grade
-
End Shape (Left)
-
Standard -
Tapped -
Stepped -
Stepped and Tapped -
Stepped and Threaded
-
-
End Shape (Right)
-
Standard -
Tapped -
Stepped -
Stepped and Tapped -
Stepped and Threaded
-
-
Torque
- High Torque
- Middle Torque
-
Shaft material
- SCM415 Equivalent
- SUJ2
- SUS440C Equivalent
- SUS304
- SUJ2 Equivalent
-
Number of Nuts(pc(s).)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 8 Day(s) or Less
- 10 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 16 Day(s) or Less
- 20 Day(s) or Less
- 21 Day(s) or Less
- 22 Day(s) or Less
- 23 Day(s) or Less
- 25 Day(s) or Less
Related Categories to Spline Shaft
-
- Linear Shafts
- Shaft Supports
- Shaft Collars
- Linear Bushings
- Ball Guides
- Spline Shaft
- Oil Free Bushings, Washers
- Oil Free Plates, Guide Rails
- Linear Guides
- Cable Carriers
- Ball Screw
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
-
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy