Locating Pins（Page2）

• 

  Small Diameter Locating Pin - Shouldered, Press Fit

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
  - SUS304 may not be polished.
  - The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
  - The outer diameter of the locating pin can be selectable up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins Double Stepped - Tapped

  MISUMI

  [Features]Suitable for positioning workpieces with different hole diameters. It is attached with a female thread.

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape)

  MISUMI

  - Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape) from MISUMI.
  - Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped) from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection - Tapped -

  MISUMI

  Straight Type with the diameter configurable in 0.01 mm increments has been newly offered. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Diamond Pin (BJ723)

  IMAO CORPORATION

  A stepped diamond pin for positioning parts. Main Body: Hardened and tempered and polished finish.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Large Head, Tapered - Threaded, Hex Socket

  MISUMI

  - Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
  - Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Large Flat Head (Threaded)

  MISUMI

  - Locating Pins - Large Flat Head (Threaded) from MISUMI.
  - Large Flat Head, Press Fit + Lock Nut Type. Improved maintainability compared to Press Fit Type.
  - Polished, Centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 4 options of alteration, Sphere tip (RC), C Chamfered size (CN), Hex Socket Machining (RAC) or Wrench Hole Machining (LAC)
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Flat Head (Tapped)

  MISUMI

  Small Flat Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to the press fit type.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered Press Fit)

  MISUMI

  - Locating Pins - Shouldered (Tapered Press Fit) from MISUMI.
  - Shouldered Standard Tapered Head allows for height adjustment of the locating target.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pilot Pins - B Dimension Configurable - Female Thread/ without Flathead Slot

  MISUMI

  • Price Down

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Holders for Locating Pins - Compact Flange

  MISUMI

  Use in combination with Locating Pins Set Screw Type or Internal Thread Type enables locating at higher position.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Eccentric

  MISUMI

  Locating Pins used when the hole location differs in the mounting area and the locating area.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Marker Pins - Hexagon Socket Type

  MISUMI

  - Marker Pins - Hexagon Socket Type from MISUMI.
  - Hex hole enables easy mounting with a hex wrench.
  - The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - The pin with small thread diameter has thin under-head part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Small Diameter Locating Pin - Shouldered, Threaded

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
  - The hardness of steel pin is 50～58HRC.
  - SUS304 may not be polished.
  - When L=0, an undercut will be added at the neck of the thread.
  - Shaft diameter can be selected up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Detection Pins for Weld Nuts

  MISUMI

  Weld nut detection pin. Please use it together with the workpiece detection unit (PCPNA).

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Press Fit) from MISUMI.
  - Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - The material of this locating pin is made of High hardness stainless steel with a hardness level at 35HRC~.
  - If the diameter exceeds Ø10, core hardness may be 30HRC~.
  - For high hardness stainless steel large head tapered type, the configurable range of dimensions has been further widened and the number of available alterations has been increased.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Threaded)

  MISUMI

  Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Large Flat Head (Threaded)

  MISUMI

  Large Flat Head with each dimension configurable. We reduced the price drastically compared to the conventional products.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
  - A straight positioning pin made of high hardness stainless steel.
  - Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
  - Tapped type locating pin provided tapped thread for disassembled.
  - For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
  - The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Threaded

  MISUMI

  Large Head, Tapered, with the configurable dimension for each part. The tolerances on both ends and the tapered dimensions are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Tapped

  MISUMI

  - Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished and centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Tapped from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Press Fit

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Threaded

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Tapped

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)

  MISUMI

  - Locating Pins - Large Head Tapered (Plastic Tip - Press Fit) from MISUMI.
  - Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
  - SUS304 locating Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - Pilot Pins - Standard / Press Fit

  MISUMI

  [Features]It is inserted and positioned for purposes such as preventing pitch deviation. It is installed by press-fitting.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Tapped)

  MISUMI

  - Locating Pins - Straight, Tapered (Tapped) from MISUMI.
  - The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Air Vent (Threaded)

  MISUMI

  [Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins-High Hardness Stainless Steel/R/Taper R/Threaded

  MISUMI

  R and Taper R Types have been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Flex Locater (Taper Pin) CP720

  IMAO CORPORATION

  [Usage]
  · Plate positioning
  [Features]
  · Repeat positioning accuracy is ±10 micron.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)

  MISUMI

  While it has the same shape as conventional Tip Shape Selectable Type (Shapes A and C only), its configurable range is different therefrom. Overall length of insertion guide, R length and tapered section length are configurable.

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Flanged Flat

  MISUMI

  - Locating pins - flanged flat from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - Insertion guide tip type can be selected 2 types, Tapered (A shape), and Taper R (B Shape).
  - The flange of pin has 2 shapes available, round flange and compact flange.
  - It can be used by fixing the flange with bolts. 2 types of tip shapes are available.
  - The material of pin can be selected 2 types, SKS3 Equivalent or SUS304 Equivalent.
  

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Plate Centering Pins

  MISUMI

  - Plate Centering Pins, BCMPA / CMPA / SCMPA series from MISUMI.
  - Suitable for centering thin objects.
  - Can be used for attaching gripper.
  - Center holes may disappear depending on dimension B.
  - The material of pin can be selected 2 types, steel S45C Equivalent or stainless steel SUS304.
  - SUS304 Plate Centering Pins may not be polished and may have no centering hole.
  - When the L dimension of tapped type is less than Mx4, the tapped hole or pilot hole for tapping may go through.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Screw Mounted

  MISUMI

  "The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Pusher Pins - Small Head

  MISUMI

  A Small Head Plastic Pin used as the Workpiece Holder.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Feed Pins - Shouldered - Threaded

  MISUMI

  Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Small Diameter Locating Pin - with Shoulder Seat

  MISUMI

  - Small Diameter Locating Pin - with Shoulder Seat from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Spherical tip, and Flat tip.
  - The outer diameter of the locating pin can be configurable from 1.0 to 3.5 mm.
  - The shoulder part is provided to prevent pin extraction.
  - The overall length of the product can be configurable from 13.0 mm to 30.0 mm.
  - The material of locating pin is made of Stainless Steel SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Full Threaded)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Full Threaded) from MISUMI.
  - Screw-fitting type without pilot. Costs for hole machining on fixtures can be reduced.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 3 options for alteration, Wrench flat, Wrench hole (φ3.5 mm) or Hex socket machining.
  - Any alteration cannot be combined with the other alteration.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Tapered Plunging Locating Pin

  MISUMI

  - Tapered Plunging Locating Pin, PICP series from MISUMI.
  - The tapered section holds a workpiece, which enables positioning without wobbling.
  - The pin of Tapered Plunging Locating Pin, PICP series is made of SKD11 with hardness level at 60～63HRC.
  - The body of Tapered Plunging Locating Pin, PICP series is made of S45C.
  - The spring part of Tapered Plunging Locating Pin, PICP series is made of SWP-B.
  - Variation of PICP series have 2 types available, PICP6 or PICP10.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Solid

  MISUMI

  - Small Diameter Locating Pins - High Hardness Stainless Steel – Solid from MISUMI.
  - Locating Pins for Micromachining less than Ø3. Corrosion-resistant and rigid. Suitable for locating Base, etc.
  - The tip shape is selectable from four types, Flat (SF), Sphere (SP), Taper (ST), or Tapered (SX).
  - Chamfering or tolerance changing of mounting portion is available as alteration.
  - Note that High Hardness Stainless Steel contains Mn and dissolves by acid.
  - High Hardness Stainless Steel is weakly magnetic.
  

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Small Head

  MISUMI

  "High accuracy positioning is available, because the O.D. can be configured in 0.01mm increment on either of the mounting side or the locating side."

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Press Fit

  MISUMI

  R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

Loading...