Other Control Devices

• 

  Stage Stepper Motor Controller Connection Cable (Connects Between Controllers)

  SURUGA SEIKI

  [Features]
  · A cable for connecting motorized stages with stepping motor controllers.
  · Various cables other than the standard 2 m cable are available.
  · Two to six cables (in increments of 2 m).
  · One-end loose-wire cable (controller side is loose-wire).
  · Robot cable.
  · These cables can be selected when purchasing motorized stages.

  Days to Ship:	16 Day(s) or more

• 

  DS102/112 Controller Software

  SURUGA SEIKI

  Software for easily configuring and controlling a USB or RS232C connected DS102/DS112 stepping motor controller over Windows.

  Days to Ship:	11 Day(s) or more

• 

  Stepper Motor Driver

  SURUGA SEIKI

  This driver is recommended for driving motorized stages using a motion control board or a PLC positioning unit (not using a controller made by Suruga Seiki).

  Days to Ship:	19 Day(s) or more

• 

  Peripherals for Motorized Stages - Cable for Motorized Stages

  MISUMI

  cable that allows you to adjust the distance between the motorized stage and the controller. Please choose the length according to your needs.

  Days to Ship:	12 Day(s) or more

• 

  Peripherals for Motorized Stages - Handset Terminal

  MISUMI

  You can use the motorized stage immediately after connecting it to the controller (MSCTL102).

  Days to Ship:	12 Day(s) or more

• 

  Cable for DC 24 V type input driver

  SURUGA SEIKI

  A product with a 600 m cable crimped on to the connector included with the driver.

  Days to Ship:	19 Day(s) or more

• 

  Handset Terminal

  SURUGA SEIKI

  Can remotely control DS102/DS112 stepping motor controllers housed in control panels or racks.

  Days to Ship:	11 Day(s) or more

• 

  Connection Cable

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Cable for connecting controllers/drivers to stages.
  · Driver-side open connection type cable is wired only to stage-side connector.

  Days to Ship:	11 Day(s) or more

• 

  Driver-Side Separating Cable

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A cable for connecting controllers/drivers with stages.
  · With the driver side disconnection cable, only the stage side connector is wired.
  · Use when preparing a driver separately.

  Days to Ship:	11 Day(s) or more

• 

  3-axis controller driver

  CHUO PRECISION INDUSTRIAL

  A 3-axis controller driver with a power supply voltage of AC90 to 240V, 50/60Hz.
  
  [Features]
  · A 3-axis controller driver (0.35A/phase) with a power supply voltage of AC90 to 240V50/60Hz.
  · Using the QT-AK3 operations box enables jog movement, step movement, teaching operations, and one-touch speed switching.
  · Programs created with the included dedicated application software can be saved. Can be operated automatically using just the controller.
  · Units (mm, μm, decimal degree, degrees/minutes/seconds displayed using symbols, etc.) can be displayed on the LCD of the operation box.
  · Interfaces for PC: RS-232C and Ethrnet

  CAD ：

  2D

  Days to Ship:	96 Day(s) or more

• 

  Isolation Interface

  CHUO PRECISION INDUSTRIAL

  An interface box for isolated connections between 2/3-axis QT-A series products and an external device.

  CAD ：

  2D

  Days to Ship:	96 Day(s) or more

• 

  Electromagnetic brake box

  CHUO PRECISION INDUSTRIAL

  The QT-BK is an adapter for controlling the Z stage with electromagnetic brakes from the manufacturer using the QT-A controller series. Can use either DC24V or a dedicated AC adapter for the power supply input.
  
  [Features]
  · An emergency stop switch used by connecting to the QT-A series controller's emergency stop input terminal (Emergency).
  · The input/output has a terminal block structure, making it easy to connect.
  · Emergency stop is entered when the emergency stop button is pressed, and released when the button is rotated to the right.
  · Set the emergency stop function to activate via the DipSW (dip switch) on the main body of the controller during use.
  · The release method for the emergency stop function on the main body of the controller is, depending on the setting of "parameter no. 54," "turn the power on again," "use the STOP key" on the operations box, or, via communication, the "RESTA command" or the "RESET command."

  CAD ：

  2D

  Days to Ship:	96 Day(s) or more

• 

  Emergency Stop Switch for QT

  CHUO PRECISION INDUSTRIAL

  An emergency stop switch used by connecting to the QT-A series controller's emergency stop input terminal (Emergency).
  
  [Features]
  · The input/output has a terminal block structure, making it easy to connect.
  · Emergency stop is entered when the emergency stop button is pressed, and released when the button is rotated to the right.
  · Set the emergency stop function to activate via the DipSW (dip switch) on the main body of the controller during use.
  · The release method for the emergency stop function on the main body of the controller is, depending on the setting of "parameter no. 54," "turn the power on again," "use the STOP key" on the operations box, or, via communication, the "RESTA command" or the "RESET command."

  CAD ：

  2D

  Days to Ship:	96 Day(s) or more

• 

  Megatorque Motor, Drive Unit EDD Type

  NSK

  [Features]
  ・ Adopting original servo algorithm (achieved a settling time of 1 ms)
  ・ Internal program operation is possible
  ・ Various control inputs and outputs are available

  Days to Ship:	26 Day(s) or more

• 

  Cable/Connector for Megatorque Motor

  NSK

  NSK, other control equipment, cables/connectors for Megatorque Motors.

  Days to Ship:	22 Day(s) or more

Loading...