Stepping Motors（Voltage Specifications：DC Specification）

• 

  Stepper Motor, PK Series

  ORIENTAL MOTOR

  Oriental Motor, stepper motor PK Series.

  Days to Ship:	16 Day(s) or more

• 

  Stepper Motor for Units

  ORIENTAL MOTOR

  This is an individual motor (component) of the stepper motor unit.

  Days to Ship:	21 Day(s) or more

• 

  Stepper Motor, CRK Series

  ORIENTAL MOTOR

  The CRK Series built-in positioning function type is a microstepping-driven DC input 5-phase stepper motor unit with a built-in positioning function in a compact driver.
  [Features]
  ・ Lineup of products with encoders (CRK only)
  ・ A high torque, low vibration stepper motor with a basic step angle of 0.72 (500 divisions per rotation) (PK only)
  ・ High-precision positioning can be achieved with low vibration and low noise (A separate driver is required to drive) (PK only)

  Days to Ship:	16 Day(s) or more

• 

  High Torque 2-Phase Stepping Motor, Standard type, PKP Series

  ORIENTAL MOTOR

  [Features]
  ・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
  ・ Please choose the ideal motor according to your design scene
  ・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same size

  Days to Ship:	16 Day(s) or more

• 

  86 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°

  FULLING MOTOR

  - 86 series 2-phase high torque hybrid type stepping motor with 1.8° step from FULLING MOTOR.
  - Step angle: 1.8°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 820VAC, 1s, 3mA
  - Max. radial force: 220N (20mm from the flange)
  - Max. axial force: 60N
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  42 Series 2-Phase, High Torque Hybrid Stepper Motor, Step Angle 0.9°

  FULLING MOTOR

  - 42 Series 2-Phase, High Torque Hybrid Stepper Motor with 0.9° step angle from FULLING MOTOR
  - Step angle: 0.9°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 28N (20mm from the flange)
  - Max. axial force: 10N
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  42/57 Series High Torque Hybrid Type Stepper Motor With an Integrated Step Angle of 1.8

  FULLING MOTOR

  - 42/57 Series High Torque Hybrid Type Stepper Motor with 1.8° step angle from FULLING MOTOR
  - Step angle: 1.8°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 28N (20mm from the flange)
  - Max. axial force: 10N
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Stepper Motor, UPKW Series

  ORIENTAL MOTOR

  - Stepping Motor, UPKW Series from ORIENTAL MOTOR.
  - Compact Drivers, The UPK•W series drivers are only 5.31 inch (135mm) high and therefore, keep the installation area small. They also come with a built-in mounting bracket for easy installation.
  - The UPK•W series does more than provide higher torque. It is also designed so that the motor produces less vibration, and a new driver has been developed to include a vibration control circuit to dramatically reduce vibration in the mid-speed range (1-5kHz).
  

  Days to Ship:	21 Day(s) or more

• 

  Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series

  SHINANOKENSHI

  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programmed in 8 tables.
  · Can select 4 levels of microstep division (1, 2, 4, 16).
  · The origin position can be restored through the origin sensor input.
  · Easy setting with provided dedicated application.
  · Input power supply: 24 V DC.
  · Error output function.
  · Abundant protection functions (overheating, overvoltage, overcurrent).

  Days to Ship:	10 Day(s) or more

• 

  42 Series 2-Phase, High Torque Hybrid Stepper Motor, Step Angle 1.8°

  FULLING MOTOR

  - 42 Series 2-Phase, High Torque Hybrid Stepper Motor with 1.8° step from FULLING MOTOR.
  - Step angle: 1.8°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10%
  - Inductance accuracy: ± 20%
  - Temperature Rise: 80℃ Max. (rated current, 2 phase on)
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 28N (20mm from the flange)
  - Max. axial force: 10N
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  86 series 2-phase gearbox equipped high torque stepping motor with a step angle of 1.8°

  FULLING MOTOR

  - 86 series 2-phase gearbox equipped with a high torque stepping motor with 1.8° step from FULLING MOTOR.
  - Step angle: 1.8°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 820VAC, 1s, 3mA
  - Max. radial force: 220N (20mm from the flange)
  - Max. axial force: 60N
  

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Stepper Motor □42 mm (Thin Type)

  SANYO DENKI

  [Features]
  ·high torque stepping motor
  ·A product that achieves an ultra-compact motor size of □42 mm

  Days to Ship:	16 Day(s) or more

• 

  Stepper Motor With Built-in Controller, SSA-TR Series

  SHINANOKENSHI

  [Features]
  · Motor, driver and controller are integrated into the motor flange size.
  · Various operations can be programmed in 8 tables.
  · Can select 4 levels of microstep division (1, 2, 4, 16).
  · Warning/error output function.
  · Design with dedicated bracket for high heat dissipation.
  · Easy setting with provided dedicated application.
  · Lineup of geared types.
  [Applications]
  · Equipment for various factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transport equipment, etc.), positioning and constant-speed rotation control.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Servo Screwdriver & Stepper Motor Set CSB-BZ Series

  SHINANOKENSHI

  
  ● Closed loop servo drive
  ● Low noise, low vibration, and low heat generation across the entire speed range
  ● Thin DIN rail mounted driver
  ● 4-stage resolution settings (500, 1,000, 5,000, 10,000 p/r)
  ● Various Protection Functions
  ● Input Power Supply: 24 VDC
  ● The speed filter enables smooth acceleration and deceleration
  ● Easy 6-stage gain settings

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit

  SHINANOKENSHI

  Various operations can be programed in 8 tables
  
  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programed in 8 tables.
  · 4 levels of micro step division (1, 2, 4, 16) selectable.
  · Home return operation possible with origin sensor input.
  · Easy setting with the included dedicated application.
  · Input power supply: DC24V.
  · Error output function.
  · Abundant protection functions (excess heating, voltage and current).

  Days to Ship:	10 Day(s) or more

• 

  Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series

  SHINANOKENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70XH90XD33 mm, 190 g.

  Days to Ship:	10 Day(s) or more

• 

  2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit

  SHINANOKENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70 × H90 × D33 mm, 190 g.

  Days to Ship:	10 Day(s) or more

• 

  5-Phase Micro step driver and stepping motor set CSA-UB series

  SHINANOKENSHI

  5 phase equivalency at with 2 phases at low cost
  
  [Features]
  · 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.
  · A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).
  · Choose from 16 levels (1 to 128).
  · 16 step current setting: 0 to 3.0A (Max).
  · With forward rotation / reverse rotation limit input.
  · Auto power down function

  Days to Ship:	10 Day(s) or more

• 

  Step out detection driver & stepping motor set CSA-BX series

  SHINANOKENSHI

  Step-out detection, closed loop switchable by switch
  
  [Features]
  · Step-out detection and closed loop mode can be toggled by switch.
  · Step-out detection possible (synchronization loss detection mode) using open loop control.
  · Equipped with step-out prevention function (closed loop mode) using closed-loop control.
  · Motor startup with speed filter, vibration reduction possible at stopping time.
  · 4 step resolution (400, 800, 1600, 3200P/R).
  · 13 step current setting: 0.6 to 3.0A
  · Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).
  · Input power supply: DC24V.
  · Auto power down function.

  Days to Ship:	10 Day(s) or more

• 

  High-Output Microstep Driver and Stepper Motor Set CSA-BB Series

  SHINANOKENSHI

  Maximum high output: 48V, 6A
  
  [Features]
  · Maximum input voltage 48V, high power micro step driver with 6A maximum current.
  · A maximum 3,200 divisions per revolution (minimum step angle: 0.1125°).
  · Choose from 5 levels (1, 2, 4, 8, 16).
  · 16 step current setting: 0 to 6A (Max).
  · Stop current setting function.
  · Protection function (excess heat and voltage protection).

  Days to Ship:	10 Day(s) or more

• 

  High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series

  ORIENTAL MOTOR

  [Features]
  ・ New high torque 2-phase stepper motor PKP Series
  ・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
  ・ Please choose the ideal motor according to your design scene
  ・ A geared type effective for deceleration, torque increase, resolution increase, and vibration countermeasures
  ・ Backlash is smaller than conventional products. Also, wider speed range and easier to use

  Days to Ship:	21 Day(s) or more

• 

  57 series 2-phase high torque hybrid type stepping motor with a step angle of 0.9°

  FULLING MOTOR

  - 57 series 2-phase high torque hybrid type stepping motor with 0.9° step angle from FULLING MOTOR
  - Step angle: 0.9°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 75N (20mm from the flange)
  - Max. axial force: 15N
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  110 series 2-phase high torque hybrid type stepping motor with a step angle of 1.8°

  FULLING MOTOR

  - 110 series 2-phase high torque hybrid type stepping motor with 1.8° step from FULLING MOTOR.
  - Step angle: 1.8°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 1800VAC, 1s, 5mA
  - Max. radial force: 220N (20mm from the flange)
  - Max. axial force: 60N
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  57 series 3-phase hybrid type stepping motor with a step angle of 1.2°

  FULLING MOTOR

  - 57 series 3-phase hybrid type stepping motor with 1.2° step from FULLING MOTOR.
  - Step angle: 1.2°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 75N (20mm from the flange)
  - Max. axial force: 15N
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  110 series 3-phase hybrid type stepping motor with a step angle of 1.2°-

  FULLING MOTOR

  - Size 110mm 3-Phase Hybrid Stepping Motor from FULLING MOTOR
  - Step angle: 1.2°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10%
  - Inductance accuracy: ± 20%
  - Temperature Rise: 100℃ Max. (rated current)
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 1800VAC, 1s ,5mA
  - Max. radial force: 330N (20mm from the flange)
  - Max. axial force: 100N
  - Insulation class: F
  

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Speed Controller Built-in Stepper Motor "SSA-VR Series"

  SHINANOKENSHI

  [Features]
  ● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.
  ● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.
  ● Abnormal rotation detection and automatic recovery are possible with the motor alone.
  ● Speed control is made simple with analog input.
  ● Wide speed control range (0 to 1800r/min).
  [Applications]
  ● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.

  Days to Ship:	10 Day(s) or more

• 

  Stepping Motors, AZ Series

  ORIENTAL MOTOR

  [Features]
  ・ Equipped with a newly developed ABZO sensor
  ・ No external sensor required
  ・ Reduction of origin return time
  ・ No battery required
  ・ Energy saving and low heat generation
  ・ Three drivers to choose from to match your system configuration
  ・ Easy operation that can be realized with the data setting software MEXE02

  Days to Ship:	16 Day(s) or more

Loading...