(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem.
Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS.
Untuk informasi lebih lanjut, silakan hubungi Customer Service :
TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008.
Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Keyless Bushing (Fastening Fittings)
[What is a keyless bushing (fastening fitting)?]
A keyless bushing is a fastener that can fix shafts and hubs (gear, sprocket, pulley, etc.) without key grooving. By tightening the bolt, drag and friction force are generated in the tapered fitting part, causing it to fasten by the resultant force.
| Days to Ship |
|
|---|
-
- Recommendation
Days to Ship: Same day or more -
- Recommendation
Days to Ship: Same day or more -
MechaLock - Standard (Centering Function)
MISUMI
It comes in a wide variety of sizes, materials, and surface treatments, and has a centering function.
- Volume Discount
Days to Ship: Same day or more -
TSUBAKIMOTO CHA
A keyless bushing (fastening joint) that connects the shaft and boss without using a key.
[Features]
·Strong fastening is possible just by tightening the tightening bolt.
·A general-purpose type that is easy to install and remove.
·Key processing, spline processing, press fitting, shrink fitting, etc. are not required at all.
·A wide variety of sizes are available, and it is also compatible with large diameter shafts.
·Selectable depending on the application.
·Stainless steel, electroless nickel plating, and inch sizes are also available.
[Applications]
·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.
·Convenient for places where it is necessary to put on and take off.
·Ideal for industrial printers, machine tools, etc.- CAD ：
- 2D
Days to Ship: 14 Day(s) or more -
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned. Can support heavy loads.
[Features]
· Tighten the clamping bolt to move the 2 taper ring in the shaft direction.
· At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
· The PSL-G has an even transmission ability due to its simple construction and strong components, and can also cope with heavy loads.
· Short in shaft direction, taking up no more space than is necessary.
· PSL-G-CThe simple rust proofing specification is a simple rust proofing specification that involves applying electroless nickel plating to the main bodyDays to Ship: 10 Day(s) or more -
MISUMI
The maximum permissible torque is higher than the standard type, and it securely locks the shaft and hub.
- Volume Discount
Days to Ship: Same day or more -
TSUBAKIMOTO CHA
A keyless bushing that connects the shaft and boss without using a key.
[Features]
·Since it is compatible with a wide range of tolerance shafts (other than KP specifications), it is possible to use standard products for plus tolerance shafts such as servo motors.
·It has a centering function.
·With a product lineup starting from small diameter shafts, it is ideal for fastening the output shafts of small stepping motors and servo motors.
·Stainless steel specifications (SS) and electroless nickel plating specifications (KP) do not require the application of oil or grease during assembly.
·Compared to the AE series, the inner/outer diameter ratio is smaller, allowing for a more compact design.
·Low surface pressure specifications that can be used for small diameter bosses are also available.
[Applications]
·Ideal for timing pulleys, cams, etc. where fine angle adjustment is required.
·It is convenient for places where detachment is required, such as when mounting directly on the motor shaft.- CAD ：
- 2D
Days to Ship: 16 Day(s) or more -
Days to Ship: Same day or more -
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned. Medium load and lightweight types.
[Features]
· Tighten the clamping bolt to move the outer ring in the shaft direction.
· At this time, the wedging action between the inner ring and the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
· The PSL-D is designed for use with medium loads, the surface pressure is small, and it can lead to a reduction of the diameter and weight of the installation.
· Short in shaft direction, taking up no more space than is necessary.
· PSL-D-CThe simple rust proofing specification is a simple rust proofing specification that involves applying electroless nickel plating to the main bodyDays to Ship: 10 Day(s) or more -
Days to Ship: 14 Day(s) or more -
ISEL
[Features]
· 34 models that have shaft diameters standardized from ø5 to ø85.
· Centering function suppresses outer circumference and terminal surface run-out.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining.
· Wide range of hub options with thin walls and low surface pressureDays to Ship: Same day or more -
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions clearance, and can be easily aligned and positioned.
Days to Ship: 10 Day(s) or more -
Days to Ship: 1 Day(s) or more -
MechaLock - Compact (Centering Function)
MISUMI
[Features]It has a centering function and is suitable for a smaller hub.
- Volume Discount
Days to Ship: Same day or more -
MechaLock - Straight for High Torque
MISUMI
The axial length has been extended compared to the straight type, allowing it to handle higher loads.
- Volume Discount
Days to Ship: Same day or more -
Mechanical Lock, High Torque Transmission Type
MISUMI
By increasing the bolt size, it has excellent durability and is ideal for mechanisms that require high transmission power.
Days to Ship: 16 Day(s) or more -
Days to Ship: Same day or more -
Keyless bushing A.P.LOCK SAPL-A Series
SUNGIL
[Features]
·Self-centering function: Prevents fine off-centering
·Small diameter difference between inner diameter (d) and outer diameter (D), low surface pressure allows installation on small hubs
·Inner diameter standardized from ⌀5 to ⌀50
·Simple in concept and easy to assemble
·Stainless steel material (vacuum environment) or electroless nickel plating (corrosion prevention) product can be selected depending on the usage environment.Days to Ship: 13 Day(s) or more -
Keyless Bushing A.P.LOCK SAPA Series
SUNGIL
[Features]
·Aluminum material
At High-Speed Servo Control Positioning, The Moment of Inertia Reduction is an important factor in system performance. The Use of Aluminum A.P.Lock suitable for aluminum pulley enables high-speed use with low inertia.
·High torque transmission
Because it uses high-rigidity aluminum alloy to transmit high torque, it can be used not only for aluminum pulleys but also for general steel pulleys.
·Ideal for clean rooms
Electroless nickel plated bolts and aluminum body are used as standard , making it ideal for clean rooms.Days to Ship: 13 Day(s) or more -
EVERON
[Features]
● Shaft hole machining and QA machining not required.
● Conforms to new JIS key specifications.
[Applications]
● For connecting shafts to their appropriate pulleys.- STOCK
Days to Ship: 1 Day(s) or more -
MISUMI
Because the bolt is attached directly to the hub, the difference between the inside and outside diameters is small and the walls are thin. Can be attached to small hubs.
- Volume Discount
Days to Ship: Same day or more -
MechaLock - Easy Mounting (Nut)
MISUMI
[Features]It can be easily installed by simply tightening 1 nut.
- Volume Discount
Days to Ship: Same day or more -
Days to Ship: Same day or more -
Mechanical MKN Rust-proof Nut Tightening Type - Electroless Nickel Plating Specifications
ISEL
Nut tightening shortens tightening time. Electroless nickel plated product.
Days to Ship: 16 Day(s) or more -
Mechanical MKT Rust-proof General Purpose Type - Electroless Nickel Plating Specifications
ISEL
No drag when connecting for easy removal. Electroless nickel plated product.
Days to Ship: 16 Day(s) or more -
Days to Ship: 16 Day(s) or more -
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
・ The KPL300 type requires very little mounting space in the radial direction, and the number of built-in KanaLocks can be selected up to 4. It is also possible to transmit a large torque.
・ The mating of the boss hole and the shaft is up to H8/h8Days to Ship: 13 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-C Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design)
·Suitable for Short Hubs.
·Since the inner ring is in close contact with the hub section, the hub does not move during tightening.
·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Keyless bushing A.P.LOCK SAPL-B Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
·The outer diameter of the cover is larger than that of the SAPL-A type, and the bolt size is larger, which makes it relatively durable compared to the same inner diameter.- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Mechanical lock MB standard high-torque type
ISEL
Centering function suppresses outer circumference and terminal surface run-out. High torque specifications.
[Features]
· 21 models that have shaft diameters standardized from ø25 to ø150.
· High torque transmission specifications.
· With centering function.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining, wide range of options available during designDays to Ship: 16 Day(s) or more -
Mechanical Lock MKA Rust-proof Standard Electroless Nickel Plating Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Electroless nickel plated product.
Days to Ship: 16 Day(s) or more -
Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Stainless steel specifications.
Days to Ship: 16 Day(s) or more -
Days to Ship: 16 Day(s) or more -
KANA lock (cost performance product) KPL200 shape
KATAYAMA CHAIN
KPL200 is a dedicated KanaLock for shafts and bosses that require substantial transmission torque. Easy mounting. Applicable shaft diameter 19 mm to 70 mm.
Days to Ship: Same day or more -
Mechalock MC Series Aluminum Type
ISEL
· 22 models from φ4 to φ35 shaft diameter available as standard
· Supports aluminum timing pulleys (steel is also usable)
· Reduced number of bolts shortens attachment/detachment time
· With a spigot joint on the back, it can also be used as a bearing retainer
· With low surface pressure, it is also ideal for hollow shaftsDays to Ship: 16 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]
·Self-centering function: Prevents minute off-centering.
·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.
·Standardized inner diameter ⌀4.5 to ⌀40.
·Simple in concept and easy to assemble.
·Stainless steel (vacuum environment) or electroless nickel plating (corrosion prevention) products can be selected depending on the operating environment.Days to Ship: 13 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-AS Series
SUNGIL
[Features]
·Self-centering function: Prevents minute off-centering.
·The diameter difference between the inner diameter (d) and the outer diameter (D) is small, and the low surface pressure makes it possible to install even small hubs.
·Standardized inner diameter from ⌀4.5 to ⌀40.
·Simple in concept and easy to assemble.
·Stainless steel material (vacuum environment) or electroless nickel plating (corrosion prevention) can be selected depending on the usage environment.- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Keyless Bushing A.P.LOCK SAPL-CK Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design)
·Suitable for Short Hubs.
·Since the inner ring is in close contact with the hub section, the hub does not move during tightening.
·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Keyless bushing A.P.LOCK SAPL-CS Series
SUNGIL
[Features]
· Self-centering Capability: Minimal Off-centering Prevention.
・The difference in diameter between the inner diameter (d) and the outer diameter (D) is small, so that it can be mounted on a small hub with low surface pressure. (A.P. Lock of the most compact design)
·Suitable for Short Hubs.
·Since the inner ring is in close contact with the hub section, the hub does not move during tightening.
·Stainless Steel or Electroless Nickel plated products can be selected depending on the environment.- CAD ：
- 2D
Days to Ship: 13 Day(s) or more -
Keyless bushing A.P.LOCK SAPC Series
SUNGIL
[Features]
·Aluminum material
At High-Speed Servo Control Positioning, The Moment of Inertia Reduction is an important factor in system performance. The Use of Aluminum A.P.Lock suitable for aluminum pulley enables high-speed use with low inertia.
·Ideal for aluminum pulleys
When driving a servo motor with a timing pulley, there is a slip problem because the conventional friction coupling unit has a high surface pressure and does not fit the hub diameter. However, the SAPC series reduces the number of bolts based on the torque specification of the servo motor, to reduce surface pressure, so that tightening with aluminum pulley is done without any difficulty.
·Finishing structure
Since it is designed to allow the bearing push plate to work, it is not necessary to use a separate bearing push plate.
·Easy positioning of assembly
Conventional power locks require a gap of 1 mm from the counterparts in consideration of disassembly, but the SAPC series has a structure that is easy to disassemble even when there is no hub movement space when disassembled. It is also easy to locate.Days to Ship: 13 Day(s) or more -
Days to Ship: 12 Day(s) -
Days to Ship: 8 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Shaft Bore Dia. d(Ø) |
| Hub Dia.(Ø) |
| Body Material |
| Allowable Torque Range(N•m) |
| Centering |
| Surface Treatment |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | TSUBAKIMOTO CHA | MIKI PULLEY | MISUMI | TSUBAKIMOTO CHA | MISUMI | MIKI PULLEY | ISEL | ISEL | MIKI PULLEY | ISEL | MISUMI | MISUMI | MISUMI | MISUMI | SUNGIL | SUNGIL | EVERON | MISUMI | MISUMI | MISUMI | ISEL | ISEL | ISEL | KATAYAMA CHAIN | SUNGIL | SUNGIL | ISEL | ISEL | ISEL | ISEL | KATAYAMA CHAIN | ISEL | SUNGIL | SUNGIL | SUNGIL | SUNGIL | SUNGIL | ISEL | ISEL | ISEL | ISEL |
| Product Series | Keyless Bushings(Mechanical Lock), Straight With Centering Function | Mechanical MKN Rust-proof Nut Tightening Type - Electroless Nickel Plating Specifications | Mechanical MKT Rust-proof General Purpose Type - Electroless Nickel Plating Specifications | Mechanical Lock MKA Rust-proof Standard Electroless Nickel Plating Specifications | Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Days to Ship | Same day or more | Same day or more | Same day or more | 14 Day(s) or more | 10 Day(s) or more | Same day or more | 16 Day(s) or more | Same day or more | 10 Day(s) or more | 14 Day(s) or more | Same day or more | 10 Day(s) or more | 1 Day(s) or more | Same day or more | Same day or more | 16 Day(s) or more | Same day or more | 13 Day(s) or more | 13 Day(s) or more | 1 Day(s) or more | Same day or more | Same day or more | Same day or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | Same day or more | 16 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 12 Day(s) | 8 Day(s) or more | 12 Day(s) or more | 12 Day(s) |
| Specifications |
| |||||||||||||||||||||||||||||||||||||||||||
| Type | Flanged | Straight | Flanged | Straight | Straight | Straight | Flanged | Thin Wall | Straight | Nut Tightening | Flanged | Flanged | - | Thin Wall | Straight | Flanged | Direct Mounting | Flanged | Flanged | Straight | Direct Mounting | Nut Tightening | Straight | Nut Tightening | Straight | Thin Wall | Sleeve | Thin Wall | Flanged | Flanged | Flanged | Flanged | Straight | Straight | Flanged | Flanged | Flanged | Thin Wall | Thin Wall | Flanged | - | - | - | - |
| Shaft Bore Dia. d(Ø) | 5 ～ 50 | 30 ～ 50 | 5 ～ 70 | 22 ～ 38 | 19 ～ 120 | 20 ～ 65 | 15 ～ 35 | 8 ～ 35 | 2 ～ 50 | 8 ～ 35 | 5 ～ 70 | 6 ～ 40 | - | 5 ～ 50 | 30 ～ 65 | 30 | 14 ～ 40 | 5 ～ 50 | 5 ～ 35 | 11 ～ 75 | 5 ～ 30 | 8 ～ 35 | 19 ～ 50 | 8 ～ 35 | 20 ～ 50 | 6 ～ 50 | 10 ～ 80 | 5 ～ 30 | 8 ～ 30 | 35 | 8 ～ 50 | 8 ～ 50 | 20 ～ 65 | 19 ～ 70 | 4 ～ 35 | 5 ～ 50 | 5 ～ 40 | 5 ～ 30 | 5 ～ 30 | 5 ～ 35 | - | - | - | - |
| Hub Dia.(Ø) | 16 ～ 72 | 55 ～ 80 | 16 ～ 97 | 47 ～ 65 | 47 ～ 165 | 47 ～ 95 | 29 ～ 57 | 15 ～ 47 | 16 ～ 80 | 14 ～ 48 | 16 ～ 97 | 12 ～ 53 | - | 12 ～ 65 | 55 ～ 95 | 52 | 25 ～ 48 | 16 ～ 72 | 16 ～ 57 | 47.6 ～ 107.93 | 8 ～ 35 | 14 ～ 48 | 47 ～ 80 | 14 ～ 48 | 47 ～ 80 | 12 ～ 65 | - | 12 ～ 41 | 22 ～ 55 | 57 | 21 ～ 72 | 21 ～ 72 | 47 ～ 95 | 47 ～ 110 | 15 ～ 56 | 16 ～ 72 | 16 ～ 62 | 12 ～ 41 | 12 ～ 41 | 16 ～ 56 | - | - | - | - |
| Body Material | Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Aluminum | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel | Stainless Steel | Steel | Steel | Aluminum | Steel | Stainless Steel | Steel | Stainless Steel | Aluminum | - | - | - | - |
| Allowable Torque Range(N•m) | 2.0~20.0 ～ 1000.1~3000.0 | 1000.1~3000.0 ～ 3000.1~10000.0 | 2.0~20.0 ～ 3000.1~10000.0 | 300.1~500.0 ～ 1000.1~3000.0 | 200.1~300.0 ～ 10000.1~300000.0 | 200.1~300.0 ～ 1000.1~3000.0 | 70.1~100.0 ～ 500.1~700.0 | 20.1~50.0 ～ 700.1~1000.0 | 2.0~20.0 ～ 1000.1~3000.0 | 20.1~50.0 ～ 300.1~500.0 | 2.0~20.0 ～ 3000.1~10000.0 | 2.0~20.0 ～ 700.1~1000.0 | - | 2.0~20.0 ～ 1000.1~3000.0 | 1000.1~3000.0 ～ 3000.1~10000.0 | 500.1~700.0 | 50.1~70.0 ～ 300.1~500.0 | 2.0~20.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 500.1~700.0 | - | 2.0~20.0 ～ 100.1~150.0 | 20.1~50.0 ～ 300.1~500.0 | 200.1~300.0 ～ 1000.1~3000.0 | 20.1~50.0 ～ 300.1~500.0 | 200.1~300.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 500.1~700.0 | 2.0~20.0 ～ 500.1~700.0 | 700.1~1000.0 | 20.1~50.0 ～ 1000.1~3000.0 | 20.1~50.0 ～ 700.1~1000.0 | 200.1~300.0 ～ 1000.1~3000.0 | 200.1~300.0 ～ 3000.1~10000.0 | 2.0~20.0 ～ 200.1~300.0 | 2.0~20.0 ～ 1000.1~3000.0 | 2.0~20.0 ～ 300.1~500.0 | 2.0~20.0 ～ 500.1~700.0 | 2.0~20.0 ～ 150.1~200.0 | 2.0~20.0 ～ 200.1~300.0 | - | - | - | - |
| Centering | Provided | None | Provided | None | - | None | Provided | Provided | - | Provided | Provided | - | - | Provided | None | Provided | None | Provided | None | None | None | None | None | Provided | None | Provided | None | Provided | Provided | Provided | Provided | Provided | None | None | Provided | Provided | Provided | Provided | Provided | None | - | - | - | - |
| Surface Treatment | None | None | None / Black Oxide / Electroless Nickel Plating | None | None / Electroless Nickel Plating | None / Electroless Nickel Plating | None | None | None / Electroless Nickel Plating | None | None | None / Electroless Nickel Plating | - | None / Electroless Nickel Plating | None | None | None | None | Anodize | None | None | None / Black Oxide / Electroless Nickel Plating | - | Electroless Nickel Plating | Electroless Nickel Plating | None | None | None | None | None | Electroless Nickel Plating | None | None | None | Anodize | Electroless Nickel Plating | None | Electroless Nickel Plating | None | Anodize | - | - | - | - |
| Tightening Structure | Single Cone Type | Double Cone Type | Single Cone Type | Double Cone Type | Double Cone Type | Double Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | - | Single Cone Type | Double Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Tapered Sleeve Type | Double Cone Type | Tapered Sleeve Type | Single Cone Type | Tapered Sleeve Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Double Cone Type | Double Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | - | - |
| Tightening Method | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - |
| Allowable Torque(N•m) | 10 ～ 1768 | 1193 ～ 3820 | 2.8 ～ 3400 | 333 ～ 1029 | 289 ～ 13500 | 300 ～ 2990 | 94.1 ～ 678 | 29 ～ 790 | 6 ～ 1760 | 29.4 ～ 461 | 7 ～ 3400 | 4.7 ～ 720 | 19.6 ～ 1706 | 3 ～ 2120 | 1110 ～ 6400 | 590 | 64 ～ 420 | 7 ～ 1500 | 6 ～ 576 | - | 4.2 ～ 149 | 21 ～ 461 | 280 ～ 1870 | 29.4 ～ 461 | 294 ～ 1775 | 11 ～ 2120 | 6.9 ～ 1860 | 9 ～ 523 | 18 ～ 510 | 970 | 16.6 ～ 1362 | 10.7 ～ 754.3 | 300 ～ 2990 | 270 ～ 5100 | 2 ～ 230 | 4.6 ～ 1362 | 2.8 ～ 430.6 | 9 ～ 523 | 3 ～ 168 | 2.5 ～ 230 | 10.7 ～ 301.1 | 16.6 ～ 548 | 29.4 ～ 461 | 29.4 ～ 461 |
Loading...
Configure
Specification/Dimensions
-
Type
-
Shaft Bore Dia. d(Ø)
-
Hub Dia.(Ø)
-
Body Material
-
Allowable Torque Range(N•m)
-
Centering
-
Surface Treatment
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Keyless Bushing (Fastening Fittings)
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy