Conveyer Rollers（Long Roller Type：Straight）

• 

  Conveyor Rollers-Metal/Steel

  MISUMI

  Roller for metal conveyor with bearing. Materials can be selected from steel, aluminum alloy, and stainless steel (SUS304).

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Roller with Sprocket

  MISUMI

  Conveyor roller with sprocket. The material of the roller is steel, and the material of the sprocket is S45C.
  The number of sprocket teeth is 10, and the compatible chain is CHE40. The length of the roller part can be selected from 100, 200, 300, 400, and 500. Manufacturer recommended axis: Φ11.9 (+0,-0.1)

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Conveyor Rollers - Shaft & Roller Sets

  MISUMI

  This is a set of conveyor rollers and shafts. The pipe shaft and pins required for installation are included as a set, reducing the hassle of arranging parts.
  The conveyor rollers, pipe shafts, and pins are all made of steel, and the surface treatment is trivalent chromate.
  For roller strength, please refer to the specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Free Roller for Light Loads (30 kg or Less)

  ITOUDENKI

  [Features]·For light duties (30 kg or less). [Materials]·STKM.

  Days to Ship:	16 Day(s) or more

• 

  Roller with Shaft (Stainless Steel)

  TRUSCO NAKAYAMA

  [Features]
  - This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.

  Days to Ship:	Quote

• 

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Steel Roller (Conveyor Roller), S Series (Standard Bearing), Diameter φ 12.0 × Width 90 - 390

  MAKITECH

  High durability φ 12 mm roller which employs a standard bearing. Suitable for transporting small parts. Roller unit of the S-1216NB roller conveyor.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (R-5721NB)

  MAKITECH

  φ 57 mm, T2.6 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5721NB roller conveyor.
  
  [Features]
  · Easy to install thanks to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Miniature Rollers for Conveyors

  MISUMI

  Conveyor roller with bearing. You can choose from two types of material: steel or stainless steel.
  For steel type, surface treatment can be selected from trivalent chromate or hard chrome plating.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 790 (LR Type)

  OKURA

  Medium load ⌀48.6 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.

  Days to Ship:	11 Day(s) or more

• 

  Steel Roller (Conveyor Roller) M Series (R-1912P)

  MAKITECH

  Popular φ19 individual roller for low-cost R-1912P roller conveyor, which is optimal for light / small item transport. The widths can be specified in 1 mm increments from 100 to 500 mm.
  
  [Features]
  · The roller diameter is φ19.1. The minimum roller interval is P20.
  · Standard roller width (nominal) is 100W to 500W in 50mm increments.
  · Can be manufactured to desired size.
  · Popular product, pressed-in bearing, inexpensive type, and φ19.
  · Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Stainless Steel Tapered Roller (Roller for Conveyor), M Series (R900), Diameter φ 44.7 x Width 200 - 600

  MAKITECH

  A light to medium load type with the inside frame radius of 900 mm. Roller unit of the RS-TC900 roller conveyor. The widths can be specified in 1 mm increments from 200 to 600 mm.
  
  [Features]
  · 90 degree angle for 900 mm internal diameters.
  · Standard roller width (nominal) is 200W to 600W in 50mm increments.
  · Can be manufactured to desired size.
  · Pressed-in bearing.
  · Stainless steel frame

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)

  OKURA

  Roller diameter ⌀76.3 is the largest for steel rollers. For heavy objects measured in units of tons. Transport distance and roller width can be specified within the range of 150 - 1190 mm.

  Days to Ship:	11 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (R-5714NB)

  MAKITECH

  Medium load φ57 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5714NB roller conveyor.
  
  [Features]
  · Easy to install due to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF7

  FUJI SEISAKUSHO

  [Features]
  - Multipurpose roller with superior shock resistance and quiet performance.
  - Housing employs polycarbonate, which confers excellent shock resistance.
  - Multipurpose roller which can be used in a wide variety of different fields.
  - Both press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available for the bearing element.
  - Additionally, either hardened polyvinyl chloride (PVC) or steel (ST) can be used for the tube material, depending on the application.

  Days to Ship:	16 Day(s) or more

• 

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF3

  FUJI SEISAKUSHO

  Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.
  [Features]
  ·For medium and heavy loads. A double labyrinth seal is used for the seal part.
  ·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.
  ·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.
  ·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.
  [Applications]
  ·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.
  ·Because it contains bearings, it can rotate more smoothly.
  ·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.

  Days to Ship:	16 Day(s) or more

• 

  Return Roller R Type

  JAPAN ROLLER

  One of the most widely used JIS standard steel tube roller. Roller that supports the belt on the return side.

  Days to Ship:	14 Day(s) or more

• 

  Conveyor Rollers-Urethane Lined Type

  MISUMI

  Urethane lined conveyor roller with bearing. The core metal material can be selected from steel, aluminum alloy, and stainless steel (SUS304).
  Please refer to the specification table for roller strength.
  The shore (hardness) of urethane is A90, A70, A50, and the color is natural. Urethane thickness can be selected from 3, 4, and 5.
  A90 is ether urethane, A50/A70 is ester urethane.
  Additionally, the urethane of Shore A90 can be changed to antistatic urethane through additional machining (UDC).

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Steel Roller (Conveyor Roller), S Series (Standard Bearing), Diameter φ 48.6 x Width 90-790

  MAKITECH

  φ48 roller that employs a standard bearing and boss integration for quiet operation and high durability. Roller unit of the S-4814NB roller conveyor.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Aluminum Roller (Roller For Conveyor), S Series (SA-1810), Diameter φ18.1 × Width 100 - 500

  MAKITECH

  φ 18 aluminum roller. Suitable for transporting small parts. Roller unit of the SA-1810 roller conveyor.
  
  [Features]
  · The roller diameter is 18.0 mm. The minimum roller interval is P20.
  · The standard of the roller width (nominal) is 100 to 500 mm at intervals of 50 mm.
  · Configurable size is available.
  · Press bearing.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel Tapered Roller (Roller for Conveyor), S Series (R1600), S Series φ 50.0 × Width 390 - 790

  MAKITECH

  A light to medium load type with the inside frame radius of 1, 600 mm. Roller unit of the S-TC1600 roller conveyor.
  
  [Features]
  · 90° angle for 1, 600 mm internal diameters.
  · The standard roller width (nominal) is 390 to 790 mm.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Roller Single Unit FMS57R With Shaft for Medium Loads, Roller Conveyor

  MEIKIKOU

  *Sold as a roller unit.
  
  [Features]
  - Roller is 2.1 mm thick and can withstand shock better than the FMC57R roller.

  Days to Ship:	14 Day(s) or more

• 

  Roller with Axel (Steel)

  TRUSCO NAKAYAMA

  [Features]
  ● This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads, 57 mm for moderate loads, and 60.5 mm for moderate loads.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  V Pulley Interlocking Roller

  TAIYO KOGYO

  Features
  • Can be equipped as a V pulley interlocking auxiliary roller for various motor roller makers by adjusting the included collar.
  • 57-mm moderate load roller.
  
  Applications
  • Used as motor roller V-pulley type interlocking auxiliary roller.

  Days to Ship:	Quote

• 

  Spiral Return Roller

  JAPAN ROLLER

  Symmetrical spiral shape roller surface has the function of scraping off the "adherence" of the transported material that causes belt meandering and unevenness while rotating. It is recommended to install it in the area where you want to promote ore fall within the conveyor system.

  Days to Ship:	20 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)

  OKURA

  Optimal for small item transport. Transport distance and roller width can be specified within the range of 100 - 500 mm.

  Days to Ship:	17 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)

  OKURA

  Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Days to Ship:	17 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor) High Strength, Roller Diameter ⌀57 × Width 90 - 990 (SSR Type)

  OKURA

  Shock-resistant type which improves upon the strength of the SR type. Transport distance and roller width can be specified within the range of 90 – 990 mm.

  Days to Ship:	11 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø60.5 × Width 90-990 (MR Model)

  OKURA

  Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.

  Days to Ship:	11 Day(s) or more

• 

  Steel Roller Starter, High Strength Type, Diameter ø60.5 × Width 90 to 990 (MMR Type)

  OKURA

  Shock-resistant. Improved strength compared to the MR type. Transport distance and roller width can be specified within the range of 90 – 990 mm.

  Days to Ship:	17 Day(s) or more

• 

  Aluminum Roller (Roller For Conveyor), M Series (RA-2816) Diameter φ28.6 × Width 100 - 500

  MAKITECH

  Small-diameter φ28 aluminum roller. Individual roller for RA-2816 roller conveyor, a lightweight conveyor; suitable for small item transport.
  
  [Features]
  · The roller diameter is φ28.6. The minimum roller interval is P40.
  · Standard roller width (nominal) is 100W to 500W in 50mm increments.
  · Machined bearings, high quality

  Days to Ship:	12 Day(s) or more

• 

  Steel Roller Conveyor, M Series (R-6023P), Diameter φ 60.5 × Width 100 - 1000

  MAKITECH

  Medium load φ 60 steel roller. Roller unit of the R-6023P roller conveyor. The widths can be specified in 50 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 60.5 mm. The thickness is T2.3. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Pressed-in bearing; inexpensive type.
  · Model 90 frame standard type.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Aluminum Roller (Roller For Conveyor), M Series (RA-3816), Diameter φ38.1 × Width 100 - 600

  MAKITECH

  General purpose φ38 aluminum roller. Individual roller for the lightweight RA-3816 roller conveyor. The widths can be specified in 50 mm increments from 100 to 600 mm.
  
  [Features]
  · The roller diameter is φ38.1. The minimum roller interval is P50.
  · This model is most frequently used with the aluminum rollers.
  · Standard roller width (nominal) is 100W to 600W in 50mm increments.
  · Pressed-in bearing, inexpensive type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (R-4832NB)

  MAKITECH

  φ 48 mm, T3.5 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-4832NB roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · Easy to install thanks to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Resin Roller (Roller for Conveyor), M Series (JR-5028), Diameter φ 50.3 × Width 100 - 600

  MAKITECH

  φ50 resin roller. Suited for transport of lightweight, small items. The roller component from the lightweight JR-5028 roller conveyor. The widths can be specified in 1 mm increments from 100 to 600 mm.
  
  [Features]
  · The roller diameter is φ50.3. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 600W in 50mm increments.
  · Can be manufactured to desired size.
  · Aluminum extrusion

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (RH-5721P)

  MAKITECH

  A medium-load ⌀ 57-mm/t=2.1 mm steel roller. A drop-in frame type, easy-to-replace roller. A single roller unit for the RH-5721P roller conveyor.
  
  [Features]
  · The roller diameter is ⌀ 57.2 mm. The wall thickness t=2.1 mm. Improved impact resistance. The minimum roller interval is P75.
  · The standard roller width (nominal) is 100–1000 mm in increments of 50 mm.
  · A press bearing, economical type roller.
  · A type 90 frame drop-in roller.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Resin Roller (Roller for Conveyor), S Series (SJR-3018), Diameter φ30.6 × Width 90 - 390

  MAKITECH

  φ30 resin roller. Suited for transporting lightweight, small items with steel frame. Roller unit of the SJR-3018 roller conveyor.
  
  [Features]
  · The roller diameter is φ30.6. The minimum roller interval is P50.
  · Standard roller width (nominal) is is 90W to 390W.
  - Custom sizes are not available.
  · Resin molded SUS ball bearing.
  · Model 60 frame

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Roller Single Unit FMC57R With Shaft for Medium Loads, Roller Conveyor

  MEIKIKOU

  ø57 steel rollers and steel frames. Highly versatile standard type.

  Days to Ship:	15 Day(s) or more

• 

  Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)

  OKURA

  [Features]
  · Low noise type with resin bearings.
  · Conveyor length and roller width within the range of 240 to 490 mm can be specified.

  Days to Ship:	17 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor) Resin Bearing Type (Stainless Steel Shaft), Diameter ⌀42 × Width 240 - 490 (ZARS Type)

  OKURA

  Water resistant, low noise type with resin bearings. Stainless steel shaft. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Days to Ship:	11 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀19.1 × Width 90 - 490 (ER Type)

  OKURA

  Smallest available steel roller. Optimal for small item transport. Transport distance and roller width can be specified within the range of 90 - 490 mm.

  Days to Ship:	11 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀25.4 × Width 90 - 490 (KR Type)

  OKURA

  [Features]
  • Best suited for transport of lightweight, small items.
  • Transport lengths and roller width can be specified within the range of 90 - 490 mm.

  Days to Ship:	11 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)

  OKURA

  More economical than KR when work dimensions are 150 mm or less. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Days to Ship:	11 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø38 × Width 90-690 (QR Model)

  OKURA

  Stronger version of type FR. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Days to Ship:	11 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 790 (PR Model)

  OKURA

  Medium load ⌀42.7 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.

  Days to Ship:	11 Day(s) or more

Loading...