(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem.
Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS.
Untuk informasi lebih lanjut, silakan hubungi Customer Service :
TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008.
Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Nuts（Page3）
Nut Type
-
Pre-Assembly Insertion Metal Stoppers - Standard - For 5 Series (Slot Width 6mm)
MISUMI
This is a stainless steel type stopper suitable for use in a cleanroom
Days to Ship: 14 Day(s) or more -
Pre-Assembly Insertion Lock Nut - For 5 Series (Slot Width 6mm)
MISUMI
The position can be fixed with the single nut by tightening the included set screw
- Volume Discount
Days to Ship: Same day -
Pre-Assembly Insertion Square Nuts - For 5 Series (Slot Width 6mm)【100 Pieces Per Package】
MISUMI
Pre-Assembly Insertion Square Nuts For Aluminum Profile - 5 Series (Slot Width 6 mm.).
It is a square nut used for preparing a screw hole for assembling with bolt and machine component
[Features]
• Pre-Assembly insertion: Insert from the end before assembling the aluminum frame
• Suitable for use with aluminum profile 5 series (slot width 6 mm.)
• Can support bolt size M3, M4 and M5
• Size (Width x Length x Depth): 15 x 10 x 3 mm.
• Material: SPCC coating with trivalent chromate
[Applications]
Suitable for use with bolt and aluminum profile 5 series (slot width 6 mm.)., for assembling machine components
- Volume Discount
Days to Ship: 14 Day(s) or more -
MISUMI
Stopper for pre-assembly insertion square nut HNKK. Compatible with 5 series.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Nut, 5 Series Post-assembly Stoppers
MISUMI
Even if the frame is set vertically, the post-assembly insertion nut will not slip off. Insert the stopper into the frame and insert the nut from the above.
- Volume Discount
Days to Ship: Same day or more -
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs
MISUMI
The leaf spring is welded to the lock nut. Because positioning can be done easily, it is convenient for places where panels and covers are frequently removed.
Days to Ship: 13 Day(s) -
For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Days to Ship: Same day or more -
MISUMI
Long Nuts For Aluminum Frames 5 Series (Slot Width 6 mm.)
It is a long straight nut for an aluminum profile.
This is the equipment used for connecting aluminum profile 2 pieces or use for connecting a bolt and some machine parts such as linear guide, steel plate, etc.
[Features]
• Suitable for: Aluminum profile 5 series (slot width 6 mm.)
• Can support bolt size M3, M4 and M5
• Material : It has 2 types, S10C (Equivalent) and SUS303 (Equivalent)
[Applications]
Suitable for use with bolt and aluminum profile 5 series (slot width 6 mm.)., for assembling machine components
Days to Ship: 16 Day(s) or more -
Long Nuts for Aluminum Frames - For 5 Series (Slot Width 6mm) -Long Nuts L Dimension Fixed Type
MISUMI
These are long nuts with fixed length (L dimension). Workpieces such as slide guides can be attached to the frame at any pitch. It can also be used for adding frames.
- Volume Discount
Days to Ship: 16 Day(s) or more -
Pre-Assembly Insertion Stoppers - Standard - For 6 Series (Slot Width 8mm)
MISUMI
When used in conjunction with pre-insertion nuts, the nuts will not fall even if the frame is vertical.
- Volume Discount
Days to Ship: Same day -
Pre-Assembly Insertion Metal Stoppers - Standard - For 6 Series (Slot Width 8mm)
MISUMI
Stainless steel stopper suitable for use in cleanrooms. By using a stopper, nuts and bolts will not fall off even if the frame is set vertically.
Days to Ship: 14 Day(s) or more -
6 Series/Pre-Assembly Insertion Nuts (Stopper Integrated)
MISUMI
Product that integrates a pre-assembly insertion nut and a pre-assembly insertion stopper. You can also purchase each part individually.
- Volume Discount
Days to Ship: Same day or more -
Pre-Assembly Insertion Lock Nut - For 6 Series (Slot Width 8mm)
MISUMI
The position of the nut single piece can be fixed with the included set screw. It is convenient for places where panels and covers are frequently removed.
- Volume Discount
Days to Ship: Same day -
Pre-Assembly Insertion Offset Nuts - For 6 Series (Slot Width 8mm)
MISUMI
The tapped hole position is eccentric. By using it together with a pre-assembly insertion double joint, the nut can be fixed without protruding from the frame even if connecting at the corner of the frame.
Days to Ship: 14 Day(s) or more -
MISUMI
Pre-Assembly Insertion Square Nuts for Aluminum Frames - For 6 Series (Slot Width 8mm).
It is a square nut used for preparing a screw hole for assembling with bolt and machine component
[Features]
• Pre-Assembly insertion: Insert from the end before assembling the aluminum frame
• Suitable for use with aluminum profile 6 series (slot width 8 mm.)
• Can support bolt size M4, M5 and M6
• Size (Width x Length x Depth): 16 x 16 x 4 mm.
• Material: SPCC coating with trivalent chromate
[Applications]
Suitable for use with bolt and aluminum profile 6 series (slot width 8 mm.)., for assembling machine components
- Volume Discount
Days to Ship: 14 Day(s) or more -
For 6 Series (Slot Width 8mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Days to Ship: Same day or more -
Nut, Conductive Washers - For Aluminum Frames - For 6 Series (Slot Width 8mm)
MISUMI
Electrical conductivity between extrusions is achieved by combining this washer and the Toothed Washer HUZW.
- Volume Discount
Days to Ship: 16 Day(s) or more -
5 Series/Metal Stopper Set 20mm Square
MISUMI
A set of the post-assembly insertion nut and stopper. It is cheaper than purchasing the nut and stopper separately.
- Volume Discount
Days to Ship: Same day or more -
For 6 Series (Slot Width 8mm) - Toothed Washers (Internal Teeth Type)【100 Pieces Per Package】
MISUMI
When used in conjunction with the conductive washer HDW, conductivity between frames is achieved.
- Volume Discount
Days to Ship: 16 Day(s) or more -
MISUMI
6 series (groove width 8 mm) pre-assembly insertion square nut stopper for aluminum extrusions.
- Volume Discount
Days to Ship: 14 Day(s) or more -
MISUMI
Post-assembly insertion spring nut for aluminum frames with a built-in spring and a temporary stop function. You can easily move through the groove by pressing it lightly with your hand.
Days to Ship: 14 Day(s) or more -
Pre-Assembly Insertion Screw - For 5 Series (Slot Width 6mm) Aluminum Frames
MISUMI
·It is a bolt-integrated nut. ·Labor-hours for bolting can be reduced.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Flanged Nuts - For 5 Series (Slot Width 6mm) Aluminum Frames
MISUMI
Flanged nut. It can be used as the tip of pre-assembly insertion bolts, such as HNTLSN5-5-12.
- Volume Discount
Days to Ship: Same day or more -
Pre-Assembly Insertion Nuts - For 6 Series (Slot Width 8mm) Aluminum Frames
MISUMI
·It is a bolt-integrated nut. ·Labor-hours for bolting can be reduced.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Post Assembly Insertion Screw - For 6 Series (Slot Width 8mm) Aluminum Frames
MISUMI
·It is a bolt-integrated nut. ·Labor-hours for bolting can be reduced.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Flanged Nuts - For 6 Series (Slot Width 8mm) Aluminum Frames
MISUMI
Flanged nut. It can be used as the tip of pre-assembly insertion bolts, such as HNTLSN6-6-13.
- Volume Discount
Days to Ship: Same day -
Days to Ship: 14 Day(s) or more -
Pre-Assembly Insertion Stoppers for Aluminum Frames - Standard - For 8 Series (Slot Width 10mm)
MISUMI
When used in conjunction with pre-insertion nuts, the nuts will not fall even if the frame is vertical.
Days to Ship: Same day -
MISUMI
Stainless steel stopper suitable for use in cleanrooms. By using a stopper, nuts and bolts will not fall off even if the frame is set vertically.
Days to Ship: 14 Day(s) or more -
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Days to Ship: Same day or more -
Pre-Assembly Insertion Offset Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm)
MISUMI
The tapped hole position is eccentric. By using it together with a pre-assembly insertion double joint, the nut can be fixed without protruding from the frame even if connecting at the corner of the frame.
Days to Ship: 14 Day(s) or more -
MISUMI
This is an inexpensive sheet metal type iron nut. Please use HNKKST as the stopper.
- Volume Discount
Days to Ship: Same day or more -
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Stoppers
MISUMI
Stopper for post-assembly insertion stopper nut. Even if the frame is set vertically, the post-assembly insertion stopper nut will not fall off.
- Volume Discount
Days to Ship: 8 Day(s) or more -
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Nut and Metal Stopper Set
MISUMI
This set product is less expensive than purchasing the nut and stopper separately.
- Volume Discount
Days to Ship: 14 Day(s) or more -
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion Short Nut【1-100 Pieces Per Package】
MISUMI
It can be installed in a space saving manner. Compared to the post-assembly insertion nut HNTAP, the overall length is shorter, so it is effective when attaching sensors and small accessories in succession.
- Volume Discount
Days to Ship: Same day or more -
MISUMI
Used in conjunction with the toothed washer HUZW to conduct electricity between frames.
- Volume Discount
Days to Ship: 16 Day(s) or more -
MISUMI
When used in conjunction with the conductive washer HDW, conductivity between frames is achieved.
- Volume Discount
Days to Ship: 16 Day(s) or more -
Long Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm) -Long Nuts L Dimension Fixed Type
MISUMI
These are long nuts with fixed length (L dimension) of 450 mm. Workpieces such as slide guides can be attached to the frame at any pitch. It can also be used for adding frames.
- Volume Discount
Days to Ship: 16 Day(s) or more -
Pre-Assembly Insertion Stoppers for Aluminum Frames - Standard
MISUMI
When used in conjunction with pre-insertion nuts, the nuts will not fall even if the frame is vertical.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Pre-Assembly Insertion Metal Stoppers - Standard【100 Pieces Per Package】
MISUMI
8 series/8-45 series pre-assembly insertion square nut stopper for aluminum extrusions.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Economy Type Post-Assembly Insertion Screws for 5 (Slot Width 6mm) Aluminum Frames
MISUMI
Economy type post-assembly insertion screws for 5 Series aluminum extrusions.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Economy Type Post-Assembly Insertion Screws for 8 (Slot Width 10mm) Aluminum Frames
MISUMI
Economy type post-assembly insertion screws for 8 Series aluminum extrusions.
- Volume Discount
Days to Ship: 14 Day(s) or more -
Days to Ship: Same day -
SF20 After Nut SS (Post-Assembly Insertion)
SUS
T-Nuts or After Nuts For Aluminum Profile SF20 Series.
It is a fastener for aluminum profile. This nut always uses with after nut holder (SFA-9A1).
[Features]
• Post-Assembly: Mountable from slots after assembly
• Suitable for: Aluminum profile SF20 series (slot width 6 mm.)
• Can support bolt size : M3, M4 and M5
• Size (WxLxD) : 8 x 15 x 3.2 mm.
• Material : S10C (Equivalent)
[Applications]
Suitable for use with bolt and aluminum profile SF20 series (slot width 6 mm.)., for assembling machine components
Days to Ship: 8 Day(s) or more -
SF30 Post-Assembly Insertion Lock Nut S (Can Lock After Post-Assembly Insertion)
SUS
Post-Assembly Insertion Lock Nut For SF30 Series (Can Lock After Post-Assembly Insertion)
It is a fastener for aluminum profile.
It has a set screw for locking and preventing the nut from slipping off when inserted into the vertical and horizontal directions.
[Features]
• Post-Assembly: Mountable from slots after assembly
• Suitable for: Aluminum profile SF 30 series (slot width 8 mm.)
• Can support bolt size: M3, M4, M5 and M6
• Include set screw size: M4
• Material: S10C (Equivalent)
[Applications]
Suitable for use with bolt and aluminum profile SF30 series (slot width 8 mm.)., for assembling machine components
Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Nut Type |
| Series |
| Nominal of Thread M(mm) |
| Material |
| Function |
| Lock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SUS | SUS |
| Product Series | Pre-Assembly Insertion Metal Stoppers - Standard - For 5 Series (Slot Width 6mm) | Pre-Assembly Insertion Lock Nut - For 5 Series (Slot Width 6mm) | Pre-Assembly Insertion Square Nuts - For 5 Series (Slot Width 6mm)【100 Pieces Per Package】 | For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Lock Nuts with Leaf Springs | For 5 Series (Slot Width 6mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】 | Long Nuts for Aluminum Frames - For 5 Series (Slot Width 6mm) -Long Nuts L Dimension Fixed Type | Pre-Assembly Insertion Stoppers - Standard - For 6 Series (Slot Width 8mm) | Pre-Assembly Insertion Metal Stoppers - Standard - For 6 Series (Slot Width 8mm) | Pre-Assembly Insertion Lock Nut - For 6 Series (Slot Width 8mm) | Pre-Assembly Insertion Offset Nuts - For 6 Series (Slot Width 8mm) | For 6 Series (Slot Width 8mm) - Post-Assembly Insertion - Short Nuts【1-100 Pieces Per Package】 | Nut, Conductive Washers - For Aluminum Frames - For 6 Series (Slot Width 8mm) | For 6 Series (Slot Width 8mm) - Toothed Washers (Internal Teeth Type)【100 Pieces Per Package】 | Pre-Assembly Insertion Screw - For 5 Series (Slot Width 6mm) Aluminum Frames | Flanged Nuts - For 5 Series (Slot Width 6mm) Aluminum Frames | Pre-Assembly Insertion Nuts - For 6 Series (Slot Width 8mm) Aluminum Frames | Post Assembly Insertion Screw - For 6 Series (Slot Width 8mm) Aluminum Frames | Flanged Nuts - For 6 Series (Slot Width 8mm) Aluminum Frames | Pre-Assembly Insertion Stoppers for Aluminum Frames - Standard - For 8 Series (Slot Width 10mm) | Pre-Assembly Insertion Offset Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm) | For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Stoppers | For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Nut and Metal Stopper Set | For 8 Series (Slot Width 10mm) - Post-Assembly Insertion Short Nut【1-100 Pieces Per Package】 | Long Nuts for Aluminum Frames - For 8 Series (Slot Width 10mm) -Long Nuts L Dimension Fixed Type | Pre-Assembly Insertion Stoppers for Aluminum Frames - Standard | Pre-Assembly Insertion Metal Stoppers - Standard【100 Pieces Per Package】 | Economy Type Post-Assembly Insertion Screws for 5 (Slot Width 6mm) Aluminum Frames | Economy Type Post-Assembly Insertion Screws for 8 (Slot Width 10mm) Aluminum Frames | Straight-Line Connector For Aluminum Frames With Slot Width of 10 mm | SF30 Post-Assembly Insertion Lock Nut S (Can Lock After Post-Assembly Insertion) | |||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship | 14 Day(s) or more | Same day | 14 Day(s) or more | 14 Day(s) or more | Same day or more | 13 Day(s) | Same day or more | 16 Day(s) or more | 16 Day(s) or more | Same day | 14 Day(s) or more | Same day or more | Same day | 14 Day(s) or more | 14 Day(s) or more | Same day or more | 16 Day(s) or more | Same day or more | 16 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | Same day or more | 14 Day(s) or more | 14 Day(s) or more | Same day | 14 Day(s) or more | Same day | 14 Day(s) or more | Same day or more | 14 Day(s) or more | Same day or more | 8 Day(s) or more | 14 Day(s) or more | Same day or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | Same day | 8 Day(s) or more | 8 Day(s) or more |
| Nut Type | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Stoppers | Post-Assembly Insertion Stoppers | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Long Nuts | Long Nuts | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Washers | Post-Assembly Insertion Nuts | Washers | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Nuts | T-Bolts | Flanged Nuts | T-Bolts | T-Bolts | Flanged Nuts | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Pre-Assembly Insertion Nuts | Post-Assembly Insertion Stoppers | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts | Washers | Washers | Long Nuts | Pre-Assembly Insertion Stoppers | Pre-Assembly Insertion Stoppers | T-Bolts | T-Bolts | Long Nuts | Post-Assembly Insertion Nuts | Post-Assembly Insertion Nuts |
| Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 5 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 5 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 6 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 8-45 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI 5 Series | MISUMI 8 Series / MISUMI 8-45 Series | MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum | SUS SF20 Series (6mm Groove width Type) | SUS SF30 Series (8mm Groove width Type) |
| Nominal of Thread M(mm) | - | M5 | M3 / M4 / M5 | - | - | M5 | M3 / M4 / M5 | - | - | - | - | M3 / M4 / M5 / M6 | M6 | - | M4 / M5 / M6 | M3 / M4 / M5 / M6 | - | M3 / M4 / M5 | - | - | M3 / M4 / M5 | M5 | M4 / M5 | M6 | M6 | M6 | M4 / M5 / M6 / M8 | - | - | M3 / M4 / M8 | - | M4 / M5 / M6 / M8 | - | M4 / M5 / M6 / M8 | M3 / M4 / M8 | - | - | - | - | - | M5 | M8 | M8 | M3 / M4 / M5 | M5 |
| Material | Stainless Steel | Steel | Steel | Stainless Steel | Plastic ～ Stainless Steel | Steel | Steel | Stainless Steel ～ Steel | Stainless Steel ～ Steel | Plastic | Stainless Steel | Stainless Steel ～ Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Stainless Steel ～ Steel | Stainless Steel | Stainless Steel | Stainless Steel ～ Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel ～ Steel | Plastic | Stainless Steel | Steel | Stainless Steel | Steel | Plastic ～ Stainless Steel | Stainless Steel ～ Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel ～ Steel | Plastic | Stainless Steel | Steel | Steel | Steel | Steel | Steel |
| Function | Metal Stoppers | With Locks | Economy | Metal Stoppers | Plastic Stoppers / Metal Stoppers | With Locks | Short, Rotating | - | - | Plastic Stoppers | Metal Stoppers | With Stoppers | With Locks | Eccentricity | Economy | Short, Rotating | Conductive | Nuts and Stoppers Set | - | Metal Stoppers | With Ball Springs | Conductive | - | Conductive | Conductive | - | With Ball Springs | Plastic Stoppers | Metal Stoppers | Short, Rotating | Eccentricity | Economy | Plastic Stoppers / Metal Stoppers | Nuts and Stoppers Set | Short, Rotating | Conductive | - | - | Plastic Stoppers | Metal Stoppers | Conductive | Conductive | Economy | Standard | With Locks |
| Lock | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - |
Loading...
Configure
Specification/Dimensions
-
Series
- MISUMI 3 Series
- MISUMI 5 Series
- MISUMI 6 Series
- MISUMI 8 Series
- MISUMI 8-45 Series
- SUS SF20 Series (6mm Groove width Type)
- SUS SF30 Series (8mm Groove width Type)
- SUS SF40 and 45 Series (10mm Groove width Type)
- LECOFRAME 25 Series (For Light/Medium Structures)
- LECOFRAME 40 Series (For Medium/Heavy Structures)
- NIC Autotec M4 Series
- NIC Autotec M6 Series
- NIC Autotec M8 Series
- NIC Autotec H10 Series
- NIC Autotec Conveyor Frame
- IMAO (item) Line 5
- MISUMI, European Standard, Groove Width: 6 mm, Dedicated for Aluminum
- MISUMI, European Standard, Groove Width: 8 mm, Dedicated for Aluminum
- MISUMI, European Standard, Groove Width: 10 mm, Dedicated for Aluminum
-
Nominal of Thread M(mm)
-
Material
-
Function
-
Lock
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
- 16 Day(s) or Less
Related Categories to Nuts
-
- Aluminum Frames
- Special AEX
- AEX Units
- Brackets and Joint Parts
- Nuts
- Bolts
- Frame Caps
- Slot Covers
- Handles
- Hinges
- Catches and Locks
- Casters
- Foot Bases for Aluminum Extrusions
- Adjuster Pads
- Panel Mounts
- Curtains, Sheets
- Door Sliders
- Conveyor Parts
- Clamps, Holders, Hooks
- LED Lights
- Jigs, Maintenace Parts
- Concealed(invisible) joint parts/frame with joints
- Accessories for aluminum alloy profiles
- Transparent Plastic Covers
- Perforated Metals, Fences, Nets, Panels
-
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy