Rotary Actuators（Type：Rotary Actuator One Side Shaft Output）

• 

  Table Type Rotary Actuator GRC/GRC-K Series

  CKD

  Rack and pinion type table shape rotary actuator achieves direct high load mounting and high position accuracy with a bearing guide.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Rotary Actuator, Vane Type, CRB1 Series

  SMC

  [Features]
  · Works with the model D-M9□ compact auto switch.
  · Highly reliable.
  & nbspSupports thrust and radial loads and uses bearings.
  · The body can be mounted directly.
  · 2 types of port location; side ported or axial ported.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Actuator, Vane Type, CRB2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Piping port parts are located on the flat section.
  · Many variations of shaft-end shape (6 types).
  · Works with the compact auto switch D-M9□ type.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Table, Rack And Pinion Type, CRA1 Series

  SMC

  [Features]
  · The model D-M9□ compact auto switch can be equipped.
  · Overall width reduced by up to 14 mm.
  · Mountable on 2 surfaces.
  · Auto switch can be mounted from the front.
  · Weight reduced by up to 14%.
  · Mounting compatibility with existing models.
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Can be mounted in a way that is suitable for the operating conditions/environment.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Hi-Rotor/Standard, PRN Series

  KURODA PNEUMATICS

  This is a hi-rotor with flexible mount type that can be mounted in any direction freely, using the mounting holes located on the body.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Rotary Cylinder MRQ Series

  SMC

  A linear-motion / rotary unit with slim cylinder and rotary actuator integrated into one compact form.
  [Features]
  · The timing of the linear and rotational motions can be set freely.
  · Available with air cushion.
  · With auto switch (can be mounted on both sides).
  · Smooth rotary motion.
  · The angle can be adjusted.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Small High Rotor / Standard Type, PRNA Series (Single Vane / Double Vane)

  KURODA PNEUMATICS

  Prevents air leakage, improves the minimum operating pressure from 0.2MPa to 0.1MPa, and doubles the maximum oscillation time, thereby increasing the scope of possible applications. 2MPato 0.1MPa and extends the longest oscillating time to 2 times more than traditional. Controls ejection phenomenon to obtain smooth operation.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  MSUA Series Rotary Table: High-Precision Type, Vane Type

  SMC

  A rotary actuator with a lightweight and compact table, suitable for robot hands.
  [Features]
  · High precision and high rigidity.
  · Improved table deflection accuracy: 0.03 mm or less.
  · Easy alignment when mounting the load.
  · Easy alignment when mounting the body.
  · Angle adjustable.
  · Disengageable.
  · Auto switch capable.
  · Vane type.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type

  SMC

  A rotary actuator that can be mounted according to the operating conditions.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Angle can be adjusted to the desired level in a range of up to 90°.
  · CRA1: basic type / CDRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type

  SMC

  Solenoid valve and rotation speed adjustment function are integrated.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · Replaceable cushion seal, easy adjustment of cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Numerous shaft shape variations allow mounting to suit the operating conditions.
  · Part number is set for the angle adjustable type.
  · CVRA1: basic type / CDVRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  Days to Ship:	15 Day(s) or more

• 

  Compact Rotary Actuator, Rack And Pinion Type, CRQ2 Series

  SMC

  [Features]
  · Uses internal cushioning.
  · The main body can also serve as a flange.
  · With angle adjustment mechanism (each rotation end ±5°).
  · 360° rotating angle type.
  · Piping can be installed from one end.
  · 2 auto switches can be mounted on the same side (mountable on both sides).
  · A double piston design free from backlash.
  · Shaft type: Supports both single and double shafts.
  · Centering is easy when mounting the body.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series

  SMC

  [11-Series Clean Series]
  ・ This product can be used in a clean environment
  ・ Prevents dust generation in the cleanroom

  Days to Ship:	15 Day(s) or more

• 

  Free Mount Type Rotary Actuator, Vane Type, CRBU2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Boasts a 12% weight reduction.
  · Multiple mounting variations.
  · Works with the compact auto switch D-M9□ type.
  · Possible to move the plate mounting position as desired.
  · Mounting pitch compatible with existing models.
  · Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series

  SMC

  Rotary actuator with solenoid valve.
  [Features]
  ·2 types of port positions, body side and axial direction
  ·Mounting method: Direct mounting / foot type mounting
  ·Auto switch: None (no symbol), with auto switch (D)
  ·Size: 50, 63, 80, 100
  ·Vane type: Single vane, double vane
  ·Rotating angle: 90°, 100°, 180°, 190°, 270°, 280°, 45°, 135°

  Days to Ship:	15 Day(s) or more

• 

  Basic Rotary Table, Vane Type, MSUB Series

  SMC

  A rotary actuator with a lightweight and compact table, suitable for robot hands.
  [Features]
  · Free mount type.
  & nbspCan be mounted in 3 directions; axial, lateral, vertical.
  · Single vane and double vane types now standard.
  · The double vane type has the same dimensions as the single vane type.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Small Selex Rotary Vane Type, RV3 Series

  CKD

  Achieves excellent durability and a switch can be included. Rotary actuator with wide range of torque sizes and vane types.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  LER Series Electric Rotary Table

  SMC

  Low-profile rotary actuator.
  [Features]
  · Positioning repeatability: ±0.03° (high-precision type).
  · Rotation angle: 320° (310°), 180°, 90°. *The value in parentheses is for the LER10.
  · Shockless / high-speed actuation.
  · Possible to set speed, acceleration/deceleration and positioning up to 64 points.
  · Energy-saving product: Automatic 40% power reduction after the table has stopped.
  · Step motor (servo 24 V DC).

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Mini Rotary Actuator CRJ Series

  SMC

  SMC rotary actuator
  
  [Features]
  · Compact and lightweight
  · Flexible mounting
  Can be mounted from the top, bottom or sides
  · Supports both front and side porting
  · Improved allowable load
  Uses a large roller bearing and large diameter output shaft
  to ensure improved compactness and rigidity
  · Even with a single-rack design, its special construction helps minimize backlash from the output shaft

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Large Therex Rotary Vane Type, Standard

  CKD

  100N/m (single) 200N/m (double) are added to the series of proven rotary vane types.

  Days to Ship:	24 Day(s) or more

• 

  LER Series Electric Rotary Table, Continuous Rotation Specification

  SMC

  Shockless / high-speed rotary actuator.
  [Features]
  · Positioning repeatability: ±0.03° (high-precision type).
  · Rotation angle: 360°.
  · Possible to set speed, acceleration/deceleration and positioning up to 64 points.
  · Energy-saving product: Automatic 40% power reduction after the table has stopped.
  · Step motor (servo 24 V DC).
  · RoHS compliant.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator

  SMC

  Compact, low-speed rotary actuator capable of low-speed transfer of workpieces.
  [Features]
  · Achieves stable motion at 5 s/90°.
  · Smooth motion without sticking or slipping.
  · Rotation time adjustment range: 1 to 5 s/90°.
  · Standard type: CRQ2 / With auto switch: CDRQ2.
  · Size: 10, 15, 20, 30, 40.
  · Port types: G1/8, NPT1/8, NPTF1/8, Rc1/8, M5.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Table, Vane Type Rechargeable Battery Compatible 25A-MSUB Series

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
  This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.

  Days to Ship:	15 Day(s) or more

• 

  ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

Loading...