FRL Units（Connection Dia.：NPT3/4）

• 

  Filter Regulator AW20 to 60-B, Filter Regulator With Backflow Function AW20K to 60K-B

  SMC

  Filter regulators and filter regulators with backflow function, with both filter and regulator integrated in one unit.
  [Features]
  · Helps save on space, and requires less piping.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Filter Regulator AW10-A To AW40-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Air Filter + Regulator + Lubricator, AC10-A to AC40-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  3-Port Valve for Releasing Residual Pressure With Keyhole (Single Action) VHS20/30/40/50

  SMC

  Conforming To OSHA Standard, Pressure Relief 3-Port Valve (Single Action) With Locking Holes by SMC.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · Designed so that the supply and exhaust status of the air flow can be checked at a glance.
  · When residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Soft Start-Up Valve AV2000/3000/4000/5000 Series

  SMC

  Low Power Consumption Soft Start-Up Valve AV2000/3000/4000/5000 Series
  [Features]
  ・ A low-speed air supply that gradually raises the initial pressure of the pneumatic system, and a start valve that shuts off the air supply and enables rapid exhaust.
  ・ With air supply / exhaust function by manual operation

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Air Combination, Filter Regulator + Lubricator AC20A-B To AC60A-B Series

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Air Combination, Filter Regulator + Mist Separator, AC20D-A To AC40D-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Air Filter + Regulator, AC10B-A to AC40B-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Air Combination, Filter Regulator + Lubricator, AC10A-A To AC40A-A

  SMC

  Air Combination Filter Regulator + Lubricator with a bowl that is completely covered by transparent bowl guard.
  [Features]
  · The inside can be seen from all angles (360°).
  · The bowl is protected from the external environment, ensuring high levels of safety.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Air Combination, Filter Regulator + Mist Separator AC20D-B To AC40D-B Series

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  FRL Combination (Modular Type Standard) C*000/C*500 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Compact modularization: Design for each F.R.L device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Lightweight: The material combination allows for both strength and low weight.
  · Long life element: The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Almost no clogs. No rust concerns.
  · Space-saving embedded pressure meter: Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Air Combination, Air Filter + Regulator + Lubricator AC20-B to AC60-B Series

  SMC

  [Features]
  ・ Improved visibility and environmental resistance
  · The transparent case guard covers the entire circumference of the case.
  · The inside can be seen from all angles (360°).
  ・ Protects the case from the external environment and improves safety
  ・ Improved workability
  ・ By integrating the element and the case, the element can be replaced at hand.
  ・ Reduction of maintenance space

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  FM Combination (Modular Type Standard) C*060 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  Modular type WL combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Modular type filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-A to AC40C-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Air Combination, Air Filter + Regulator AC20B-B to AC60B-B Series

  SMC

  FRL unit with improved workability
  [Features]
  ・ Improved visibility & environmental resistance
  · The transparent case guard covers the entire circumference of the case.
  ・ 360° visual confirmation is possible.
  ・ Protects the case from the external environment and improves safety
  ・ Improved workability
  ・ By integrating the element and the case, the element can be replaced at hand.
  · The amount of space required for maintenance has been reduced.
  
  [20-Series Copper/Fluorine-Free Specifications]
  ・ Suitable for use in environments that dislike copper and fluorine materials.
  ・ External dimensions are the same as standard products.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-B To AC40C-B

  SMC

  Air combination with better visibility and environmental resistance.
  [Features]
  · The bowl is completely covered by a transparent bowl guard.
  · The inside can be seen from all angles (360°).
  · The bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  · The element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  AC Series Air Combination Piping Adapter

  SMC

  A piping adapter that allows for easy installation and removal of the component without removing piping.
  [Features]
  · Attachment for AC Series Air Combination.
  · E100-M5-A applicable model: AC10□-A.
  · E200-□01-A, 02-A, 03-A applicable model: AC20□-A.
  · E300-□02-A, 03-A, 04-A applicable models: AC25□-A, AC30□-A.
  · E400-□02-A, 03-A, 04-A, □06-A applicable model: AC40□-A.
  · E500-□06-A applicable model: AC40□-06-A.

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  FMR Combination (Modular Type Standard) C*030/C2530 Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Boost your system with modularization.
  · Dual element construction provides long life.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  3-Port Valve for Releasing Residual Pressure With Keyhole (Double Action Type) VHS2510/3510/4510/5510

  SMC

  With this OSHA compliant Pressure Relief 3-Port Valve (Double Action) With Locking Holes, the supply and exhaust status of air flow can be checked at a glance.
  [Features]
  · The safety-measure manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.
  · A specification in which when residual pressure is being released, the valve handle can be locked in position to prevent accidental operation.
  · The double action type is structured so that the handle has to be pushed down before turning, helping prevent accidental operation.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Soft Start-Up Valve AV2000-A/3000-A/4000-A/5000-A Series

  SMC

  SMC soft start-up valve.
  [Features]
  · Start-up valves for a low-speed air supply which gradually raises the initial pressure in an air system and for quick exhausting by cutting off the air supply.
  · Power Consumption: 0.35 W.
  · Improved flow rate characteristics: Up to 2.3 times C [dm3/(s·bar)]: 9.2.
  · Energy saving: No air flow when switching the main valve.
  · Improved adjustment sensitivity with a low speed air supply.
  · Features a built-in silencer to save on space and for less overall work.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Filter Regulator, 25A-AW20 to 60-B, 25A-AW20K to 60K-B

  SMC

  [Features]
  · In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) are not used.
  · No electrolytic nickel plating or zinc plating with copper base is used.
  * Electroless nickel plating is used.
  · Low dew point compatible grease used, can be used at -70°C.

  Days to Ship:	15 Day(s)

Loading...