Tightening Fittings（Nominal of Thread：1/4）

• • On Sale Till 31/03/2025

  

  Corrosion Resistant - Tightening Fittings SUS316 - Straight

  PISCO

  SUS316 is used to provide all materials with excellent corrosion resistance.
  
  [Features]
  · SUS316 is used to provide all materials with excellent corrosion resistance.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · Air cleaned and packaged in a Class 1000 clean room .
  · Added inch sizes.
  · Improved selection.

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

• 

  Couplings with Tube Insert - Nut and Sleeve Integrated Type - Elbows

  MISUMI

  [Features]Fluids used are air, water or oil, Elbow type fitting with inserts for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Couplings with Tube Insert - Nut and Sleeve Integrated Type - Connectors

  MISUMI

  [Features]Fluids used are air, water or oil, Connector type fitting with inserts for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Insert Fittings KF Series, Elbow Union KFL

  SMC

  A general model used for piping in the direction perpendicular to the female thread section. [Sleeve Material]·Nylon/brass

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Compression Fitting Stainless Steel, Male Connector【5-10 Pieces Per Package】

  MISUMI

  Affordable, corrosion resistant, heat and pressure resistant.

  • Volume Discount

  Days to Ship:	10 Day(s)

• 

  SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Half Unions

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated half union type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Insert Fittings KF Series, Male Connector KFH

  SMC

  A general model used for piping in the same direction from the female thread section. [Sleeve Material]·Nylon/brass

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Self-Align Fittings H/DL/L/LL Series Male Branch Tee DT

  SMC

  Self-aligning pipe fittings by SMC Corporation.
  [Features]
  ・ It can be used with flexible copper pipes
  ·Non-directional metal sleeve
  ・ A sleeve that is resistant to external damage
  ・ Low pressure loss
  [Applications]
  ・ Used for branch piping from female thread section in the 90 degree direction on both sides

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Nipples

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated nipple fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  US2 Series Nipple for Flexible Tubes Made Up of Junlon Stainless Steel

  JUNKOSHA

  [Features]
  ・ It is a stainless steel fitting for flexible tubes such as Junron U tubes and THV tubes
  ・ The cap nut with a built-in sleeve that uses a unique mechanism has eliminated the twisting of the tube during piping.
  ・ No need to control the tightening torque of the cap nut

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Service Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Self-Align Fittings H/DL/L/LL Series Male Connector H

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · A non-directional type metal sleeve tightening fitting.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  · Can be used with soft copper pipes.
  [Applications]
  · Used for piping in the same direction from female threads.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Couplings for Tubes - Nut and Sleeve Integrated Type - Straight

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated straight type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	12 Day(s) or more

• 

  MiSUMi Economy

  Compression Fittings Brass, Straight Male Connector【5-20 Pieces Per Package】

  MISUMI

  Temperature and pressure resistance, quality assurance, super strong sealing.

  • Volume Discount

  Days to Ship:	10 Day(s)

• • On Sale Till 31/03/2025

  

  Brass Tightening Fitting - Straight - for Sputtering Resistance

  PISCO

  Special brass is used for metal body to greatly improve corrosion resistance to water.
  
  [Features]
  · Special brass is used for metal body.
  · Corrosion resistance to water has been greatly increased.
  · Ideal for use in the automobile industry and for mold temperature control.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · A wide variety is available to support a wide range of applications.
  · 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Corrosion Resistant SUS316 Tightening Fitting, Elbow

  PISCO

  [Features]
  · SUS316 with excellent corrosion resistance is used for all materials.
  · The sleeveless design eliminates worries about forgetting to attach the sleeve or losing it, etc.
  ·Air cleaning and packaging in a cleanroom (class 1000).
  ·Inch sizes are added. More varieties have also been added.
  ·Ideal for chemical piping and other special environments in sectors that require a focus on airtightness.
  ·Polyurethane tubes can also be used.
  [Applications]
  ·Chemical, medical, pharmaceutical and food-related applications, etc.

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

• 

  Junron Stainless Steel Fitting, Nipple

  JUNKOSHA

  [Features]
  ・ As it is made of SUS316, which has high-corrosion resistance, it can be used in a wide temperature range from low temperature to high temperature.
  ・ It is designed dedicated for fluoropolymer/nylon resin tubes, so it does not cut the tube due to over-tightening of the cap nut.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ No need to control the tightening torque of the cap nut
  ・ Since SUS316 is used, it is a rust resistant fitting
  [Applications]
  ・ Piping of corrosion fluid
  ・ Hydraulic piping
  ・ Rust prevention piping

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Quick Seal Series Insertion Type (Brass Specifications) 90° Elbow (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance
  ・ Only the connector is sealed
  ・ No need to wrap sealing tape
  ・ For metric size, there is a notch in the hex nut part

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Quick Seal Series Insert Type (Stainless Steel Specification) Connector (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Since it is made of SUS304, it has excellent corrosion resistance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• • On Sale Till 31/03/2025

  

  Quick Seal Series Insert Type (Brass Specifications) Connector (Inch Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Only the connector is sealed
  ・ No need to wrap sealing tape
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

• 

  SUS316 Insert Fittings KFG2 Series, Union Elbow KFG2L

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Quick Seal Fitting (Insertless Connector)

  TRUSCO NAKAYAMA

  Features
  • Sealed screw unit.
  • Product offers superior pressure resistance and vibration resistance properties.
  
  Application
  • For pneumatic, hydraulic, and water pressure.

  Days to Ship:	12 Day(s)

• 

  Self-Align Fittings H/DL/L/LL Series Male Elbow DL

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for piping in the same direction from female threads.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Compression Fitting Stainless Steel, Elbow Male Connector【5-10 Pieces Per Package】

  MISUMI

  Affordable, corrosion resistant, heat and pressure resistant.

  • Volume Discount

  Days to Ship:	10 Day(s)

• • On Sale Till 31/03/2025

  

  Corrosion-Resistant SUS316 Tightening Fitting, Female Straight

  PISCO

  Totally made of corrosion-resistant SUS316.

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  for Corrosion Resistance - Tightening Fittings SUS316 - Bulkhead Socket

  PISCO

  All materials use SUS316 to provide excellent corrosion resistance.
  
  [Features]
  · SUS316, a substance with superior corrosion resistance, was used in all of the materials.
  · The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
  · Purified with clean air and packaged in a Class 1000 clean room.
  · Added inch sizes.
  · Wide selection of products.

  CAD ：

  2D

  	Special Price
  Days to Ship:	12 Day(s) or more

• 

  Junron Stainless Steel Elbow Fitting

  JUNKOSHA

  [Features]
  ・ As it is made of SUS316, which has high-corrosion resistance, it can be used in a wide temperature range from low temperature to high temperature.
  ・ It is designed dedicated for fluoropolymer/nylon resin tubes, so it does not cut the tube due to over-tightening of the cap nut.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ No need to control the tightening torque of the cap nut
  ・ Since SUS316 is used, it is a rust resistant fitting
  [Applications]
  ・ Piping of corrosion fluid
  ・ Hydraulic piping
  ・ Rust prevention piping

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Chemifit CP Series Connector【5 Pieces Per Package】

  NITTA

  [Features]
  ・ Threaded fitting made of polypropylene resin
  ・ Lightweight
  ・ Completely degrease-processed product
  ・ Parts are washed in a cleanroom
  ・ Excellent inner surface smoothness
  ・ Injection molded product, so the inner surface is smooth
  ・ Excellent dust-free and non-polluting property
  ・ Made of special polypropylene resin
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Elbows

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated elbow type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Sockets

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated socket fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	22 Day(s) or more

• • On Sale Till 31/03/2025

  

  Brass Tightening Coupler Elbow for Sputter Resistance

  PISCO

  Special brass is used for metal body to greatly improve corrosion resistance to water.
  
  [Features]
  · Special brass is used for metal body.
  · Corrosion resistance to water has been greatly increased.
  · Ideal for use in the automobile industry and for mold temperature control.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · A wide variety is available to support a wide range of applications.
  · 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Corrosion Resistant SUS316 Tighten Fitting, Female Bulkhead Straight

  PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

• 

  SUS316 Fitting, Male Elbow

  CHIYODA

  Full decreasing treatment for cleanliness. Male elbows.

  CAD ：

  2D

  Days to Ship:	19 Day(s) or more

• • On Sale Till 31/03/2025

  

  Hose Fitting, Hose Nipple

  CHIYODA

  Compression fitting for air hose.
  [Features]
  ・ Nut type that does not easily leak air or water
  ・ The cap nut type securely seals the hose, and the hose fitting has one of the strongest pull-out strength
  ・ Made of brass, hard to break and rust resistant
  ・ Tube and hose can be replaced
  ・ Minimal flow rate loss
  ・ Due to the thread section sealing, piping is possible as it is.
  [Applications]
  ・ Most suitable for industrial water piping and air piping (equipment piping, air tools, etc.)

  • STOCK

  CAD ：

  2D

  	Special Price
  Days to Ship:	1 Day(s) or more

• 

  Hose Fitting, Universal Nipple

  CHIYODA

  A cap-nut universal nipple with high pull-out strength.

  • STOCK

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Junron Brass Fitting, Nipple

  JUNKOSHA

  [Features]
  ・ Millimeter series brass fittings are compatible with Japanese Industrial Standard JIS B8381 "Pneumatic pipe fittings"
  ・ It has a mechanism that holds the tube insert part and tightens it with a sleeve and cap nut so that a reliable connection can be made.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ R (PT) Comes with a color thread seal for each thread size
  [Applications]
  ・ Pneumatic piping, water pressure, hydraulic pressure

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Junron Brass Fitting Elbow

  JUNKOSHA

  [Features]
  ・ Millimeter series brass fittings are compatible with Japanese Industrial Standard JIS B8381 "Pneumatic pipe fittings"
  ・ It has a mechanism that holds the tube insert part and tightens it with a sleeve and cap nut so that a reliable connection can be made.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ R (PT) Comes with a color thread seal for each thread size
  [Applications]
  ・ Pneumatic piping, water pressure, hydraulic pressure

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Junlon Stainless Fittings Bulkhead Female Union

  JUNKOSHA

  [Features]
  ・ As it is made of SUS316, which has high-corrosion resistance, it can be used in a wide temperature range from low temperature to high temperature.
  ・ It is designed dedicated for fluoropolymer/nylon resin tubes, so it does not cut the tube due to over-tightening of the cap nut.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ No need to control the tightening torque of the cap nut
  ・ Since SUS316 is used, it is a rust resistant fitting
  [Applications]
  ・ Piping of corrosion fluid
  ・ Hydraulic piping
  ・ Rust prevention piping

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Connector (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance
  ・ Only the connector is sealed
  ・ No need to wrap sealing tape
  ・ For metric size, there is a notch in the hex nut part

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Quick Seal Series Insert Type (with Brass Specifications) Swivel Nut Female Connector (mm Size)

  NITTA

  Brass specifications swivel nut female connector with fitting body (mm size), nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Only connectors are sealed.
  · Does not require sealing tape.
  JISB8381-1995 (flexible hose pipe fittings for pneumatic use) compliant product.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Quick Seal Series Insert Type (Stainless Steel Type) 90° Elbow (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Since it is made of SUS304, it has excellent corrosion resistance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Quick Seal Series DK Tube Dedicated Connector

  NITTA

  Consisting of three parts: fitting body of connector, nut, and sleeve. Dedicated fitting for DK tubes. No need to wrap with sealing tape.
  
  [Features]
  · Screw-in type.
  · Three parts: fitting body, nut, and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Quick Seal Series, DK Tube Dedicated Type, Tee

  NITTA

  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  QuickSeal Series, Nylon Sleeve (Dedicated for Nylon Coil Tubes)

  NITTA

  [Features]
  ・ It is a screw-in type.
  ・ This product is consisted of 3 parts: fitting body, nut, sleeve. This is a fitting dedicated for nylon coil tubes.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

Loading...