Electromagnetic Valves（Applicable Fluid：Gas）

• 

  Process Valve, 2 Port Valve For Flow Control VNB Series

  SMC

  A 2 port valve for flow control made by SMC.
  [Features]
  · Wide variety of applicable fluids
  · Cylinder actuation by external pilot air
  · Wide variations

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Process Valve, 2 Port Valve For Compressed Air And Air-Hydro Circuit Control VNA Series

  SMC

  A 2 port valve for compressed air and air-hydro circuit control made by SMC.
  [Features]
  · A universal 2 port valve exclusively for controlling air pressure systems and air-hydro circuits
  · Cylinder actuation by external pilot air
  · Balance poppet type that allows normal and reverse flow
  · Can be operated at 0 MPa
  · Wide variations

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Pilot Operated 2 Port Solenoid Valve VXP21/22/23 Series

  SMC

  [Features]
  ・ An abundant variety of combinations. A wide range of fluids can be controlled
  ・ Disassembly and assembly can be done in a short time
  ・ Selection of threaded or flange mounting is possible.

  Days to Ship:	15 Day(s) or more

• 

  Solenoid Valve DP-100 Series

  YOSHITAKE

  Can be used with different fluids including steam, cold water, air, nitrogen and argon gas. Has cleared more than 600,000 opening/closing operations.

  CAD ：

  2D

  Days to Ship:	1 Day(s) or more

• 

  WS-22/22N Type Solenoid Valve (for Liquid and Gas) Momotaro II

  VENN

  Production equipment construction equipment etc. Diaphragm system employing SSS & AAS
  
  [Features]
  · Thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 50 or less).
  · Can be mounted horizontal or vertically (nominal diameter 50 or less).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Suitable for liquids and gases.
  · Triple the durability compared to conventional products (nominal diameter less than 50).
  · The threaded type WS-22 type series solenoid valve Momotaro II combines all the favorable features and same face to face dimensions of the earlier WS-12 series for replacement ease during repair while offering the added benefit of greater durability.

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel 1MPa Pneumatic Cylinder Type Bellows Valve

  FUJIKIN

  [Features]
  ・ Pneumatic cylinder type bellows valve is a disc stop valve for ultra-high purity fluids and flammable and toxic fluid lines in various semiconductor manufacturing equipment, facilities, etc.

  Days to Ship:	17 Day(s) or more

• 

  Direct Air Operated 3 Port Valve VXA31/32 Series

  SMC

  An air operated valve made by SMC.
  [Features]
  · Can control a wide variety of fluids. Abundant variety of combinations.
  · An easy-to-use combination type that can be used as a normally open type or a normally closed type. (C.O.)
  · Easy to disassemble and reassemble in a short time.
  · Can control fluids with high viscosity (500 mm2/s).

  Days to Ship:	15 Day(s)

• 

  Air Operated 2-Port Valve, Cylinder Valve, SAB*A Series

  CKD

  Air-operated 2-port valve.
  [Features]
  · NC (normally closed) type, NO (normally open) type, double acting type
  · Connection port diameter: Rc1/4 to Rc2, 32 to 50 flange
  · Operating fluid: Air, gas
  [Application]
  · Ideal for air and gas fluid control.
  · Can also be used in an explosion-proof atmosphere.

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Multi-rex valve AG34/44 series

  CKD

  Multilex valve series for controlling various fluids including water, air, oil, and vacuum.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Solenoid Valve DP-200F/DP-200F-N Series

  YOSHITAKE

  Water hammer shock reduction and shortening the valve closure time are achieved. No leakage from valve seat as the valve is made of synthetic rubber.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Air Operated Valve for Process Gas AGD* 1R Series

  CKD

  This air operated valve for process gas has high corrosion resistance and long service life, and is optimally designed to be particle-free.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Direct Operated 3-Port Solenoid Valve Single General-Purpose Valve AG31/41 Series

  CKD

  Multilex valve series for controlling various fluids including water, air, oil, and vacuum. Offers high reliability and high quality and the ample options assure performance in different equipment and device types.

  CAD ：

  2D / 3D

  Days to Ship:	27 Day(s) or more

• 

  Direct-acting 3-port solenoid valve Discrete multi-rex valve AG33/43 series

  CKD

  [Features]
  · Multilex valve series for controlling water, air, oil, vacuum and other fluids
  · Offers high reliability and high quality and the ample options assure performance in different equipment and device types.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Direct-acting 3-port solenoid valve Discrete multi-rex valve AG34/44 series

  CKD

  [Features]
  · Multilex valve series for controlling water, air, oil, vacuum and other fluids
  · Offers high reliability and high quality and the ample options assure performance in different equipment and device types.

  CAD ：

  2D / 3D

  Days to Ship:	14 Day(s) or more

• 

  Explosion-Proof Direct Acting 2-port Solenoid Valve General-Purpose Valve AB41E4/AB42E4 Series

  CKD

  Explosion-proof valves were developed using the reliable and high quality Multilex valve as the base, for automatizing and saving-time in dangerous areas, based on "Respect of human life and Maintaining company activities."

  CAD ：

  2D

  Days to Ship:	29 Day(s) or more

• 

  Solenoid Valve DD-2/DD-3 Series

  YOSHITAKE

  Compact, lightweight, direct operated solenoid valve. Wetted part is made of stainless-steel which makes it highly corrosion proof. Can be mounted horizontally or vertically.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Solenoid Valve DP-100-C Series

  YOSHITAKE

  [Features]
  · Applicable with steam, cold water, air as well as a variety of other media including nitrogen gas, carbon dioxide (in dry state), argon gas and oil (20cSt or less).
  · 600,000 or above opening/closing operations cleared.
  · The "ANTI STICKING MECHANISM" employed on the valve sliding part makes prevents scaling 3 times more than the conventional models.
  · The stainless steel body including the main internal components makes it stainless and more durable.
  · Employs cartridge type components, making maintenance drastically easier.
  · Uses PTFE (fluoropolymer) gaskets for improved airtightness.
  · Can be used within a wide range of temperature from 0 to 1.0MPa. (When coil is horizontal, 0.03 to 1.0MPa)
  · Can be mounted horizontally or vertically (however, when coil is upward, less than 90°).

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Solenoid Valve DP-100F Series

  YOSHITAKE

  [Features]
  ・ It can be used for fluids such as steam, cold/hot water, air, as well as nitrogen gas, carbon dioxide gas (dry state), argon gas, oil (20 cSt or less)
  ・ It cleared opening and closing operation of 600,000 times or more
  ・ By adopting "ANTI STICKING MECGANISM" in the sliding part of the valve disc, it has achieved more than 3 times the scale resistance compared to the conventional model
  ・ Corrosion resistance has been improved by making the body stainless steel, including internal main parts
  ・ By adopting the cartridge type parts, the maintainability has been greatly improved
  ・ Airtightness has been improved by adopting PTFE (fluoropolymer) gasket
  ・ It can be used for a wide range of pressure from 0 to 1.0 MPa (0.03 to 1.0 MPa for horizontal coil)
  ・ It can be mounted horizontally or vertically (However, within 90° to the coil upward)

  Days to Ship:	12 Day(s) or more

• 

  Solenoid Valve DP-200/DP-200-N Series

  YOSHITAKE

  Water hammer shock reduction and shortening the valve closure time are achieved. No leakage from valve seat as the valve is made of synthetic rubber.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  WF-22/22N Type Solenoid Valve (for Liquid and Gas) Momotaro II

  VENN

  Production equipment, construction equipment, diaphragm type employing SSS & AAS
  
  [Features]
  · The flange type WF-22 type series solenoid valve Momotaro II, has all the favorable features and same face to face dimensions as the earlier WF-12 type series allowing ease of replacement during repair, with the added benefit of greater durability.
  · Suitable for liquids and gases.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontal or vertically (nominal diameter 50 or less).
  · A thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 50 or less)

  Days to Ship:	12 Day(s) or more

• 

  WF-25 Type Solenoid Valve (for Liquid and Gas) Stainless Steel Momotaro II

  VENN

  [Features]
  · Stainless steel threaded type WS-25 type series, flange type WF-25 type series solenoid valve Momotaro has the same features and face to face dimensions as the earlier WS-15 type series achieving ease of replacement during repair, with the added benefit of improved durability than the WF-15 type series.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontally or vertically.
  · Thermo-setting resin highly resistant to heat is used on the coil exterior

  Days to Ship:	12 Day(s) or more

• 

  WS-25 Type Solenoid Valve (for Liquid and Gas) Stainless Steel Momotaro II

  VENN

  [Features]
  · Stainless steel threaded type WS-25 type series, flange type WF-25 type series solenoid valve Momotaro has the same features and face to face dimensions as the earlier WS-15 type series achieving ease of replacement during repair, with the added benefit of improved durability than the WF-15 type series.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontally or vertically.
  · Thermo-setting resin highly resistant to heat is used on the coil exterior

  Days to Ship:	12 Day(s) or more

• 

  WS-18 Type Rust Proof Solenoid Valve

  VENN

  Equipped with a water hammer sensitive mechanism, the diaphragm type valve structure is suitable in water lines.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable under pressure ranging from 0.02 to 0MPa.
  · Compact and lightweight pilot type solenoid valve

  Days to Ship:	12 Day(s) or more

• 

  PS-18 Type Rust Proof Solenoid Valve

  VENN

  The built-in tube end core in this solenoid valve prevent rusty water (straight type only).
  This piston system has a pilot operated valve, used for a variety of fluids including oil and exhibiting high durability.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · A highly reliable and durable special piston ring is employed in the valve.
  · Applicable with pressure ranging from 0.02 to 1.0MPa.
  · Compact and lightweight pilot type solenoid valve.

  Days to Ship:	12 Day(s) or more

• 

  WSE-18 Type Pressure-Resistant Explosion Proof Type Solenoid Valve

  VENN

  Equipped with a water hammer sensitive mechanism, the diaphragm type valve structure is suitable in water and gas lines.
  
  [Features]
  · Applicable in explosive and hazardous areas.
  · Equipped with a manual override for ease in testing or actuation during power failure.
  · The direction of conduit tube threads can be changed to make installation or wiring easy.
  · Tube end core can be installed in straight type for preventing rust occurrence

  Days to Ship:	12 Day(s) or more

• 

  PSE-18 Type Pressure-Resistant Explosion Proof Type Solenoid Valve

  VENN

  [Features]
  · Applicable in explosive and hazardous areas.
  · Equipped with a manual override for ease in testing or actuation during power failure.
  · The direction of conduit tube threads can be changed to make installation or wiring easy.
  · Tube end core can be installed in straight type for preventing rust occurrence.
  · Used where there is danger of explosion from explosive gas.
  · Pilot operated piston system used for a variety of fluids including oil with superior durability.

  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel 16. 2MPa Pneumatic Cylinder Type High Pressure Bellows Valve

  FUJIKIN

  [Features]
  ・ Pneumatic cylinder type high pressure bellows valve is a disc stop valve for ultra-high purity fluids and flammable and toxic fluid lines in various semiconductor manufacturing equipment, facilities, etc.
  ・ The use of metal bellows achieves high airtightness, high durability, compactness, high washability, and purge characteristics, and it can be used as a high pressure gas ministerial certified product

  Days to Ship:	15 Day(s) or more

• 

  NEW MEGA-ONE LA New Type Low Pressure Air Operation Valve

  FUJIKIN

  [Features]
  ・ NEW MEGA -ONE LA is a gas operated diaphragm valve for ultra-high purity fluids and flammable and toxic fluid lines for various semiconductor manufacturing equipment, facilities, etc.
  ・ A valve that achieves high airtightness, high durability, compactness, particle-free, and dead space-free with a direct diaphragm structure
  ・ While maintaining the performance of the conventional MEGA -ONE LA, the manufacturer has made it compact

  Days to Ship:	15 Day(s) or more

Loading...