Safety Valves, Control Valves

• 

  FM Valve Type 1

  FMVALVE

  A valve that can be used in combination with electromagnetic valves and mechanical control valves.
  
  [Features]
  · This valve can be electrically controlled by combined use with electromagnetic valves. Therefore, it enables simple timed water rationing, and varying of supply start-stop intervals. In addition, it facilitates construction of effective water supply systems by combined use with sensors, etc., to match the usage conditions.
  · This valve has simple structure. Therefore, it is easy to install and maintain.
  · This valve has no flow adjustment mechanism. Therefore, the flow rate cannot be adjusted.

  Days to Ship:	9 Day(s) or more

• 

  Pressure Reducing Valve (For Steam / Low Pressure) GP-1000 Series

  YOSHITAKE

  [Features]
  ▪ SHASE-S106 conforms to standards of pressure reducing valve (Air Conditioning and Health Engineering Society).
  · The spherical shape of the main valve has excellent sealing properties to reduce valve seat leakage significantly (corresponding to the ANSI class IV) .
  · Compared with conventional pressure reducing valves, workability and durability are significantly enhanced.

  Days to Ship:	10 Day(s) or more

• 

  RP-6 Type Pressure Reducing Valve (for Steam) Benten

  VENN

  Pilot operated general-purpose products (high-capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  · The VENN-TEN is a pilot-operated pressure reducing valve used in main pipes and large flow-rate lines of construction equipment, industrial steam circuits, various production equipment, system industries, etc.
  ・­ This pressure-reducing valve is designed with operability as the number 1 priority in this design. It has stable performance under various conditions, and it is easy to install and use because it is small and light.
  · The adoption of the piston guide structure and special seal ring make control stable.
  · Can be used for a wide range of pressures and flow rates.
  ▪ As for RP-6 type, it is easy to adjust the pressure by manual handle operation with automatic lock mechanism (nominal diameter 15 to 80).
  · Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RP-9, 10, 11 Type Pressure-Reducing Valve (for Steam)

  VENN

  [Features]
  - Pilot-operated pressure reduction valve for the decompression of high-pressure steam.
  - Maximum pressure reduction ratio is 20:1; operation remains stable even under high differential pressure.
  - Face-to-face dimensions are the same as the old RP-2H type, but it is 40% lighter in weight.

  Days to Ship:	12 Day(s) or more

• 

  Safety Valve, Relief Valve AL-140 Series

  YOSHITAKE

  [Features]
  ・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (For Cold and Hot Water) GD-24GS/GD-24GS-N Series

  YOSHITAKE

  A hanging metal type. A pressure reducing valve without sliding parts. Requires maintenance of consumable parts only.

  Days to Ship:	12 Day(s) or more

• 

  RD-14 Model Series - Pressure Reducing Valve (for Cold Water/Warm Water/Air/Oil)

  VENN

  Direct acting pressure reducing valve for air, liquids, and water has a low pressure fluctuating range and can be used at low as well as high flow rates.
  
  [Features]
  · At the construction facilities, the product can be used to control the pressure of water supplied from elevated water tanks in mid-rise and high-rise buildings, or in water supply directly connected to pumps instead of elevated water tanks, as well as in boiler water supply. Industrial use of the product includes pressure control for fuel oil, lubricating oil, and air.
  · Has a pressure balance structure, so changes to set pressures are minimal.
  · Maintenance is easy as the upper side can be taken apart unidirectionally allowing for internal inspection.
  · RD-14CN models come with nylon coating to protect from red water.

  Days to Ship:	9 Day(s) or more

• 

  Air Vent Valve, TA-3/TA-6 Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-26-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance and reliability for running cold and hot water. The valve utilizes pressure-balanced structure. Therefore, secondary side pressure is maintained at a fixed level without affecting the primary side pressure.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Pressure Reducing Valve for Steam, Gas and Liquid, RD-3H Series

  VENN

  [Features]
  · Pilot type direct-acting, pressure-reducing valve that is used in non-controllable, small flow-rate locations. It has good pressure-control with excellent wide pressure range adjustment characteristics. The main parts are made from SUS (for steam).
  · Note: These valves differ for use with stream, air, vapor, and liquid.

  Days to Ship:	10 Day(s) or more

• 

  Safety Valve, Relief Valve AL-150 Series

  YOSHITAKE

  [Features]
  ・ It is a versatile type that supports fluids such as steam, air, water, and oil
  ・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance
  ・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts
  ・ The sealed structure prevents fluid from leaking to the outside

  Days to Ship:	10 Day(s) or more

• 

  Air Vent Valve TA-16 Series

  YOSHITAKE

  Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Its compact size enables mounting in a narrow space.
  
  [Features]
  • All parts are made of stainless steel, except for the valve body disk, gasket, and L-hose fitting (TA-16L), which ensures excellent corrosion resistance and durability.
  • The valve body disk is made of fluororubber, which ensures excellent sealing performance.
  • The TA-16 can easily be connected to an exhaust pipe by mounting the optional pipe connectors.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Pressure Reducing Valve (Steam) GD-30 Series

  YOSHITAKE

  This small, lightweight, direct-acting pressure-reducing valve incorporates a stainless steel valve body and valve seat, uses an external-pressure bellows in its detection component, and has excellent durability.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Air Vent, 11-AV Series

  YOSHITAKE

  Operates at a greater output across a wide range of pressures. The free-floating lever is less prone to wearing. The valve body and valve seat are made of highly durable hardened chrome steel.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (Steam), GP-1000H Series

  YOSHITAKE

  [Features]
  ・ It reacts extremely sensitively to fluctuations in primary pressure and changes in flow rate, and can maintain the secondary pressure constant
  ・ The pressure can be easily regulated and has a wide set pressure range
  ・ It complies with SHASE-S106 pressure reducing valve (The Society of Heating, Air-Conditioning and Sanitary Engineers of Japan) standards

  Days to Ship:	12 Day(s) or more

• 

  FD-10N Flow-Regulating Valve (for Excess Flow Control/Water Supply)

  VENN

  [Features]
  · Various lineup of flow rate settings.
  ･ Internal constant flow cartridge can be replaced and maintained.
  · The unique rubber elasticity enables stable and constant flow control.
  ▪ Water can be supplied by various equipment and devices such as water supply pipes or sprinklers, and showers, by limiting the rate of flow to the large-scale water receiving tank so that it is not excessively large.

  Days to Ship:	17 Day(s) or more

• 

  AF-4 Series Air Vent Valve

  VENN

  The equipment is used in building facilities and factory facilities, etc. It is an air vent valve for fluids. It automatically discharges the air that accumulates in the pipes and the air inside an airtight tank and makes the fluid flow smoothly.
  
  [Features]
  ▪ Due to the improved airtightness, it has adopted the swing valve body.
  ▪ The amount of air discharged from the equipment is comparatively large.
  ▪ It has a simple structure that allows easy handling.
  · AF-4CN is a rust-resistant nylon-coated product.

  Days to Ship:	10 Day(s) or more

• 

  FM Valve Type 3L

  FMVALVE

  [Features]
  ·The auxiliary valve (ball tap) piping can be connected directly to the main unit, so repairs can be performed without removing the auxiliary valve piping.
  ·When used in conjunction with a solenoid valve, it can be electrically controlled, so it is easy to change the timed water supply, water supply stop, and water supply start intervals.
  ·A unique buffer mechanism prevents water hammer.
  ·Equipped with a flow rate adjustment mechanism, it is possible to adjust the amount of water flow.
  ·If the pump for the water tank is a pressurized water supply system, use an electrical control system.

  Days to Ship:	10 Day(s) or more

• 

  Relief Valve, AL-250 Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-140T Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat
  ・ It is ideal for applications where valve seat leakage cannot be tolerated
  ・ The sealed structure prevents fluid from leaking to the outside

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-17 Series

  YOSHITAKE

  [Features]
  ・ The main part (valve body, valve seat) is made of stainless steel, so it has excellent corrosion resistance and durability
  ・ The down pressure can be adjusted by seat ring
  ・ It can support set pressures up to 1.6 MPa

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (for Air and Gas), GD-43-10 / GD-43-20 Series

  YOSHITAKE

  Saves on space and resources. Stainless steel is used for parts contacting liquid, fluoropolymer is used for fluid-contacting surfaces, and a special fluorine rubber is used for rubber parts to provide superior corrosion resistance and durability.
  
  [Features]
  Saves space and resources (makes separation and collection for resource recycling easy because materials are visible through the valve box and the lower cap).
  · Stainless steel materials (SCS14A and SUS316) are used in liquid-contacting parts, increasing corrosion resistance.
  · fluoropolymer is affixed to the liquid-contacting surface of the diaphragm, preventing deterioration due to liquids and providing superior corrosion resistance.
  · A special fluorine rubber with superior corrosion resistance is used.
  · A pressure-balancing valve structure ensures that the pressure on the secondary side is always kept constant without being affected by temporary side pressures.
  · The GD-41 and 43 models feature sealed structures which do not allow external outflows even when the diaphragm is damaged.
  · Safe fluorine grease is used on the O-ring.
  · Can also withstand the above for cleaning and sterilization for the purpose of cleaning and sterilizing the system and the inside of piping.
  · Pipes can be installed either horizontally or vertically.

  Days to Ship:	12 Day(s) or more

• 

  RD-43N, Pressure Reducing Valve for Door-to-Door (for Water / Hot Water), Benkei

  VENN

  A pressure-reducing valve for use in small-capacity, door-to-door water and hot water supply pipes installed inside studio apartments, etc.
  · For larger capacity and general complex housing, use types RD-44N, 47N, etc.
  
  [Features]
  · Utilizes chlorine water-resistant EPDM.
  · Sanitary design that prevents pooling of liquids.
  · Reliable construction from low-to-high differential pressure.
  · These are non-disassembly type pressure-reducing valves for safe and secure construction.
  · Post-construction hydraulic testing can be performed with the reducing valve installed.
  · Utilizes a new, simple test gag method.

  Days to Ship:	12 Day(s) or more

• 

  Constant Water Level Valve, with General-Purpose Adjustment Mechanism, LP-9HN Type

  VENN

  A general-purpose, constant-level valve equipped with an adjustment mechanism. Prevents red water. Therefore, the screw-in can be combined with pipe-end cores.
  
  [Features]
  · Equipped with a flow-rate adjustment mechanism and a valve closing-time needle adjustment.
  · A countermeasure against red water: Screw-in bronze body allowing for pipe end core assemblies.
  · Uses a bypass flow channel for the passage to the pilot pipe.
  Therefore, it provides a quiet and stable water supply without surges effecting the intermittent water supply from the ball tap.
  · A freeze-proof FV jacket is provided.

  Days to Ship:	12 Day(s) or more

• 

  TD-2 Type Series, Temperature Control Valve

  VENN

  Heating, cooling, and low temperature models are available.
  
  [Features]
  · General purpose flange type temperature adjustment valve, available for heating applications such as hot water tanks, heat exchangers, and heavy oil heaters, for cooling applications using water or a refrigerant, and low temperature applications where the set temperature is below the ambient temperature or where the set temperature is 40°C or below.

  Days to Ship:	12 Day(s) or more

• 

  VD-1H Type Vacuum Adjustment Valve

  VENN

  [Features]
  ▪ It prevents the suction of the air in a valve when it opens due to the decrease in set pressure and it also prevents the creation of vacuums in pipes and equipment.
  ▪ Using a silencer when the vapor pipe is attached prevents suction of water into the pipe when vapor stops generating.

  Days to Ship:	22 Day(s) or more

• 

  Safety Relief Valve, AL-150L Series

  YOSHITAKE

  [Features]
  · The main parts (valve body and seat) and adjustment springs are made of stainless steel; in particular, the main parts use SCS14A (equivalent to SUS316) which has excellent corrosion resistance.
  · With lift valve lever types, discharge inspections can be performed manually at a pressure that is 75% or more of the discharge pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-4T Series

  YOSHITAKE

  [Features]
  · Mainly used as a safety relief valve downstream of a pressure reducing valve, safety valve for various pressure vessels and instrumentation equipment, and relief valve for pumps.
  · Fluororesin disks are used in AL-4T valve parts for superior valve seat sealing.

  Days to Ship:	12 Day(s) or more

• 

  Ventilation Valve, TA-2 / TA-5 / TA-5F Series

  YOSHITAKE

  [Features]
  · Includes a rapid air discharge mechanism so during initial water flow, air inside the pipe is rapidly discharged, simplifying water passage.
  · Operates at a wide range of pressures compared to conventional air purge valves, from low to high pressures.
  · In the event of damage to the float valve body or valve seat surface after prolonged use, parts can be replaced from outside, simplifying maintenance and inspections.
  · TA-5 5F includes a main body made of bronze so production of rusty water is not a concern.
  · Negative pressure in the piping or tank automatically produces rapid suction of air, protecting against damage to piping due to vacuum.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (for Steam), GP-1001 Series

  YOSHITAKE

  [Features]
  ・ It complies with SHASE-S106 pressure reducing valve (The Society of Heating, Air-Conditioning and Sanitary Engineers of Japan) standards
  ・ Since the main valve has a spherical shape, it has excellent sealing performance and the amount of valve seat leakage is significantly reduced (Compliant with ANSI Class IV)
  ・ When compared with conventional pressure reducing valves, workability and durability are significantly enhanced

  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold Water), GD-27S/GD-27S-NE Series

  YOSHITAKE

  Stainless steel used for wetted parts, preventing rust. Use of pressure-balanced valve structure means that secondary side pressure is maintained at a certain level without affecting primary side pressure.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  RP-6P Type Pressure-Reducing Valve (for Steam), Benten

  VENN

  Pilot-operated general-purpose products (high-capacity) for construction equipment, factory equipment, etc.
  
  [Features]
  - The VENN-TEN is a pilot-operated pressure reducing valve used in main pipes and large flow-rate lines within construction equipment, industrial steam circuits, production equipment, system industries, etc.
  ­ Designed with operation as its highest priority, it has stable performance under many conditions, and its small size and light weight makes it easy to install and use.
  - Piston guide structure and special seal ring for stable control.
  - The RP-6 type is widely used in pressure range/flow rate applications. Its auto locking mechanism (nominal diameter from 15 to 80) makes pressure adjustment easy with manual handle control.
  - Compact design.

  Days to Ship:	12 Day(s) or more

• 

  RP-7, Pressure-Reducing Valve (for Steam) Benten

  VENN

  For steam cleaning of food equipment, disinfection equipment, cleaning equipment, etc.
  
  [Features]
  · Compact pilot-operated pressure-reducing valve used in equipment and devices with a relatively low flow rate.
  · Compact and lightweight (up to 50%, compared to other in-house products); device integration is supported.
  · Adoption of a piston guide structure and special seal ring makes control stable from lower flow rates to the maximum rated flow rate.
  · Manual handle control with auto locking mechanism makes pressure adjustment easy.
  · Compact design.

  Days to Ship:	9 Day(s) or more

• 

  RD-44N Pressure-Reducing Valve for Door-to-Door Water Supply (for Cold/Hot Water), Benkei

  VENN

  Direct acting type general purpose product (low-noise type and pipe-end core support) suitable for housing complexes, hotels, and offices. RD-44N type valves are equipped with only the pressure reducing function, which is fundamental for the water supply pressure composite valve series, and enables increase in construction and test efficiency.
  
  [Features]
  · Water supply pressure reducing valve per room unit results in: 1) Reduces flow noise. 2) Installation of valve in each room unit eliminates water supply variation due to level differences. 3) No water splashes due to application of appropriate pressure. Reduces water hammering. 4) During maintenance, impact of water outage does not affect other areas. 5. Stable mixing temperature resulting in improved habitability.
  · Uses chlorine water-resistant EPDM.
  · Sanitary design avoids pooling of liquids.
  · Works reliably from low differential pressures to high differential pressure.
  · Safe and secure construction is made possible due to intact pressure-reducing valves.
  · You can conduct a hydraulic test even after construction while the pressure reducing valve is installed.
  · Easy, simple new test gag method.

  Days to Ship:	9 Day(s) or more

• 

  FD-9N, Flow-Regulating Valve (for Excess Flow Control / Water Supply)

  VENN

  Capable of providing suitable flow via regulation to prevent excessive flow for various types of equipment and machinery such as water supply pipes for large receiving tanks, water sprayers, and showers.
  *Consider performing installation in a location as far away as possible from areas that require quiet (hotel rooms, hospital rooms, housing, etc.)
  
  [Features]
  · Rich lineup of flow rate settings.
  ･ An internal constant flow cartridge can be replaced and maintained.
  · The elasticity of the unique rubber component used enables control of a stable and constant flow.

  Days to Ship:	17 Day(s) or more

• 

  LP-9N Type, Level-Regulating Valve (for Water, for General Use)

  VENN

  By using the path to pilot piping as the bypass flow path, there is no influence of intermittent water supply of ball tap due to wave and silent and constant water supply is provided.

  Days to Ship:	12 Day(s) or more

• 

  AF-5N Air Vent Valve

  VENN

  A bronze air vent valve for use with high-pressure liquids that has a built-in filter (muffler) to dampen the sound of high pressure air discharge.

  Days to Ship:	12 Day(s) or more

• 

  AF-10 Series, Air Vent Valve

  VENN

  A stainless steel air relief valve with excellent corrosion resistance and durability, with a strainer built-in to the main body, and with air intake and exhaust functions.
  
  [Features]
  · Easy design installation possible with the built-in strainer.
  · Stainless steel with superior corrosion resistance and durability.
  · The discharge port can be freely rotated 360°, so installation is simple.
  · Equipped with a manual shut-down control.

  Days to Ship:	12 Day(s) or more

• 

  AV-1C, Vent Valve (Mini Vent)

  VENN

  For drainage pipe equipment such as attic/piping shaft/ceilings
  
  [Features]
  · In drainage standpipes and drainage horizontal branch pipes, vent pipe opens when there is negative pressure and sucks in the air to equalize the pressure in the drainage pipe and protect the trap's sealing water.
  · Valve is normally closed to prevent foul smell from leaking out.
  · Shuts out pests.
  · No need for maintenance. Durability equivalent to drainage facilities.
  · Also mountable below the overflow edge and compatible with temperatures of -20 to 60°C.
  · Provides architectural design freedom.

  Days to Ship:	12 Day(s) or more

• 

  FM Unit Valve S-2 (Opens when Power Is Supplied)

  FMVALVE

  This valve can be operated by both electrical control (solenoid valve) and mechanical control (ball tap).
  Normally, it is operated by electrical control (solenoid valve), so a control panel is required.
  [Features]
  ·Can be changed from electrical control (solenoid valve) to mechanical control (ball tap) without modifying piping
  ·Since the pipe (pilot pipe) of the sub valve (ball tap) is connected to the main body, there is no need to remove the pipe during maintenance, etc., and the work time for maintenance can be greatly reduced.
  ·Since a manual on-off valve is provided, it can be switched to ball tap (auxiliary valve) control in the event of electrical trouble.
  ·Equipped with a flow rate adjustment mechanism, the amount of water discharged can be adjusted.

  Days to Ship:	13 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB9N Type

  MIYAWAKI

  [Features]
  ・ SCCV (Self Closing and Centering Valve) mechanism (): The valve is spherical and is not fixed to the shaft, but is designed to be held with some play left, right, front and back. Since the design structure holds the valve with play, even if the shaft slightly tilts due to the effect, etc., of condensed water when the valve is closed, the valve itself can flexibly close toward the center of the valve hole
  ・ QC (Quick-Close mechanism) mechanism (): When condensate flows from the inside of the trap body to the valve hole, the valve pushed down by the expansion force of the bimetal plate gradually closes the flow passage hole provided in the guide that shuts off the inside of the body and the valve hole. The valve gradually closes the flow passage hole, weakening the flow rate of the condensate passing through the valve opening, heats the bimetal more quickly, and promotes valve closing
  ・ Also available with convenient blow valve: There is also a type with a blow valve that removes scale and pipe dust that flows into and accumulates in the trap to the outside without disassembling the trap
  ・ If you would like to have a blow valve, please specify TB9BN-C or TB9BN-R
  ・ TB9BN-C can be used up to 0.98 MPa, and cock operation is easy
  ・ TB9BN-R can be used up to 1.6 MPa
  [Applications]
  ・ Ideal for steam tracing, steam transport pipes, tank heating, heating, etc.

  Days to Ship:	14 Day(s) or more

• 

  Air Vent, 22-AV Series

  YOSHITAKE

  [Features]
  ・ It has wider operating pressure range and more discharge than conventional products
  ・ Compact and lightweight design for easy installation
  ・ Due to the adoption of the free floating lever system, there is no wear of the lever part, and since hardened chrome steel is used for the valve body and valve seat, it has excellent durability
  ・ The valve body has a ball shape and excellent sealing properties
  ・ It can be used even if the specific gravity of the fluid is light

  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-2C Series

  YOSHITAKE

  Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-3C Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-260 Series

  YOSHITAKE

  [Features]
  ・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations
  ・ Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  Days to Ship:	12 Day(s) or more

Loading...