Air Blow Guns, Nozzles for Air Blow Guns,（Nozzle Shape：Long）

• 

  Pneumatic Blow Gun BG-50 Series

  CHIYODA

  Flow rate is easily adjustable. Two air supply ports provided for your convenience.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Blow Gun VMG Series

  SMC

  An air blow gun from SMC.
  [Features]
  · A 20% reduction in power consumption can be achieved with the SMC "Blow Gun" + "S Coupler" + "Coil Tube."
  · Pressure loss of 1% or less (nozzle size: ø2.5).
  · Available nozzles: male thread nozzle, high-efficiency nozzle with male thread. Low-noise nozzle with male thread, copper tube nozzle.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  KN Series Nozzle For Blowing

  SMC

  Nozzle for blow, KN Series.
  [Features]
  ·Nozzle Connection Port Type: Male thread, insertion, single-action, compression.
  ·Fluid: Air / coolant liquid.
  ·Maximum Operating Pressure: 1 MPa (0.3 MPa with OST pipe).
  · Ambient and fluid temperature: -5 to +60°C (no freezing).
  ·Threaded section seal: None.
  ·Copper-free (Standard): All brass parts are electroless nickel plated.

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Copper Tube Long Nozzle Set VMG1 Series

  SMC

  Nozzle set for blow guns.
  [Features]
  · Long nozzles.
  · Outer diameter: 6 mm, 8 mm.
  · Hex width across flats: 12 mm, 14 mm.

  Days to Ship:	Same day or more

• 

  JOPLASTAR II, Option, Aluminum Long Nozzle

  JOPLAX

  Lightweight aluminum nozzle. Available in two sizes: 200 mm and 300 mm. No need for adapter.
  
  [Features]
  · No need for an adapter. Simply remove the JOPLASTAR II standard nozzle and retighten the cap.
  · A plastic safety shield (SL-590) can also be used

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Joplaster II - Optional PP Resin Long Nozzle

  JOPLAX

  Plastic nozzle not prone to damage objects it comes into contact with. No adapter required.
  
  [Features]
  For air blow work in narrow or deep spaces, such as for air injection during crating and packaging.
  Not prone to damage objects it comes into contact with, and ultra-light (7 g).
  · No adapter required. Just remove the Joplaster II standard nozzle and attach.

  Days to Ship:	12 Day(s) or more

• 

  Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Slender Nozzle

  KURITA

  Thin pipe design makes it easier to clean gaps.

  Days to Ship:	12 Day(s) or more

• 

  Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Long Nozzle

  KURITA

  Hard type with hexagonal bar material.

  Days to Ship:	12 Day(s) or more

• 

  Can Be Used With Air Blow Gun / Suspended Air Blow Gun, Adjustable Nozzle

  KURITA

  Although compact, it has air flow approximately 4 times a normal nozzle
  
  [Features]
  · Freely bends a large amount

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  for Air Tool Series Extension Nozzle Adapter Spout Gun SP Series SP100 and 200

  KURITA

  Can also be used with air guns.
  
  [Features]
  · Can also be used with air guns.
  · Using the long nozzle adapter lets you feed water over long distances.

  Days to Ship:	12 Day(s) or more

• 

  Ultra Lightweight Magnesium Series WT91D

  WTB

  Built-in air flow rate control function. Powder metallic coating applied.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Air Duster DS-3TF

  MEIJIKIKAI

  The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
  [Features]
  ・ The noise level is approx. 10 dB lower than the conventional product.
  ・ Approx. 3 times as much air consumed is ejected from the nozzle tip
  ・ It reduced air consumption by 14% compared to conventional products
  ・ Collision efficiency increased by 7% compared to conventional products (At 0.5 MPa)
  ・ The same power can be output with less air consumption, which has the effect of reducing compressor power consumption.

  Days to Ship:	12 Day(s) or more

• 

  Air Duster DS-3TK-JX

  MEIJIKIKAI

  Long nozzle with tip angles ranging from 0° and 45°.
  
  [Features]
  · Trigger type, quick joint type, jet nozzle, long handle type and two-bending angles, 0° and 45°.

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Air Duster DS-3TX

  MEIJIKIKAI

  The noise level is approx. 10 dB lower than the conventional one. The amount ejected from the nozzle is 3 times the amount of air consumed.
  [Features]
  ・ The noise level is approx. 10 dB lower than the conventional product.
  ・ Approx. 3 times as much air consumed is ejected from the nozzle tip
  ・ It reduced air consumption by 14% compared to conventional products
  ・ Collision efficiency increased by 7% compared to conventional products (At 0.5 MPa)
  ・ The same power can be output with less air consumption, which has the effect of reducing compressor power consumption.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Vaculeaner VCM-DF With Duster

  MEIJIKIKAI

  [Features]
  ・ A large amount of secondary air is sucked in with a small amount of compressed air, and a large suction force is obtained
  ・ When the ball valve is closed, it blows away, and when it is opened, it sucks
  ・ Since compressed air is the power source and there are no rotating parts, there are few failures, and it is an explosion-proof type and safe
  ・ The passage circuit is cylindrical and has no roughness, so there is no worry of clogging inside
  ・ VCM-DF-1 can be used at any angle as the air pipe can be bent freely by hand.
  [Applications]
  ・ Cleaning: Sucking and blowing off metal cutting chips, polishing powder, sand, sawdust, sewing thread waste, etc.
  ・ Collecting: Collecting barrel sand, sandblast sand, small parts, etc.
  ・ Cooling: Cooling molds, castings, forgings, welds, etc., and removing foreign objects by suction

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Air Duster M305-FA

  MEIJIKIKAI

  Noise reduced by 10dB compared with conventional models. The ejection volume from the nozzle is three times greater than the air consumption volume.
  
  [Features]
  · Maximum operating pressure of 1.57 MPa.
  · A rubber tip nozzle (RC-20) and a transparent shield nozzle (SN-22) are provided as options only for M305.

  Days to Ship:	13 Day(s) or more

• 

  Standard Type Duster Gun

  KINKI SEISAKUSYO

  A trigger type standard duster blow gun that can be used for a long time giving less strain to the hand.

  Days to Ship:	1 Day(s) or more

Loading...