• Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 7:00 sampai dengan 22:00 pada tanggal 22/4/2018. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 to 22:00 (WIB) 22/4/2018. We apologize for the inconvenience.

Blanking Punches

Blanking Punches

Click this image to zoom it.

Move the mouse over the image to zoom

Part Number

Configured Part Number is shown.

 
Part Number
SPCPD8-[35-60/0.1]-P[4.8-7.99/0.01]-V[1.5-4.29/0.01]-B[4-19/0.1]-S[3-10/0.1]-G[2-4.6/0.2]
SPCPD10-[35-60/0.1]-P[4.8-9.99/0.01]-V[1.5-5.3/0.01]-B[4-19/0.1]-S[3-10/0.1]-G[2-5.8/0.2]
SPCPD13-[35-60/0.1]-P[5.8-12.99/0.01]-V[1.5-7/0.01]-B[4-19/0.1]-S[3-10/0.1]-G[2-7.5/0.5]
SPCPD16-[35-60/0.1]-P[9.8-15.99/0.01]-V[2.5-9/0.01]-B[4-25/0.1]-S[3-10/0.1]-G[3-9.5/0.5]
SPCPD20-[35-60/0.1]-P[12.8-19.99/0.01]-V[3.5-11/0.01]-B[4-25/0.1]-S[3-12/0.1]-G[4-11.5/0.5]
SPCPD25-[40-60/0.1]-P[17.8-24.99/0.01]-V[5-14/0.01]-B[4-25/0.1]-S[3-12/0.1]-G[5.5-14.5/0.5]
SPCPD32-[40-60/0.1]-P[19.8-31.99/0.01]-V[7.5-18.5/0.01]-B[4-25/0.1]-S[3-15/0.1]-G[8-19/0.5]
Part NumberVolume DiscountDays to ShipRoHSD (Shank diameter)
(mm)
P (Tip dimension)
(mm)
L (L dimension)
(mm)
B (Tip length)
(mm)
G (Head side hole diameter)
(mm)
S (Tip side hole length)
(mm)
V (Tip side hole diameter)
(mm)
14 Day(s) or more Fully Compliant84.8 ~ 7.9935 ~ 604 ~ 192 ~ 4.63 ~ 101.5 ~ 4.29
14 Day(s) or more Fully Compliant104.8 ~ 9.9935 ~ 604 ~ 192 ~ 5.83 ~ 101.5 ~ 5.3
14 Day(s) or more Fully Compliant135.8 ~ 12.9935 ~ 604 ~ 192 ~ 7.53 ~ 101.5 ~ 7
14 Day(s) or more Fully Compliant169.8 ~ 15.9935 ~ 604 ~ 253 ~ 9.53 ~ 102.5 ~ 9
14 Day(s) or more Fully Compliant2012.8 ~ 19.9935 ~ 604 ~ 254 ~ 11.53 ~ 123.5 ~ 11
14 Day(s) or more Fully Compliant2517.8 ~ 24.9940 ~ 604 ~ 255.5 ~ 14.53 ~ 125 ~ 14
14 Day(s) or more Fully Compliant3219.8 ~ 31.9940 ~ 604 ~ 258 ~ 193 ~ 157.5 ~ 18.5

Loading...

  1. 1

Basic Information

Heavy-load punches No Shank type Single-stepped Jector None
Material SKD11 Equivalent Surface treatment None Shank (mounting part) shape Standard
Shank diameter D tolerance m5 T (Head thickness/plate thickness)(mm) 5

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Press
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)