(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Taperless One-Step Core Pins With Gas Vent -High Speed Steel SKH51/Cutting Facets/Tip Diamater・L Dimension Designation Type-

Taperless One-Step Core Pins With Gas Vent -High Speed Steel SKH51/Cutting Facets/Tip Diamater・L Dimension Designation Type-

Click this image to zoom it.

Move the mouse over the image to zoom

High-speed steel SKH51, face cut, tip diameter and total length specification type gas vent stepped ejector pin.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
GW-EHSF1-[50-150/0.01]-P[0.6-0.9/0.01]-N[15-135/1]-E[0.02-0.05/0.01]
GW-EHSF1.1-[50-200/0.01]-P[0.6-1/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSF1.2-[50-200/0.01]-P[0.6-1.1/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSF1.3-[50-200/0.01]-P[0.6-1.2/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSF1.4-[50-200/0.01]-P[0.6-1.3/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSF1.5-[50-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSF1.6-[50-250/0.01]-P[0.8-1.5/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSF1.7-[50-250/0.01]-P[0.8-1.6/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSF1.8-[50-250/0.01]-P[0.8-1.7/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSF1.9-[50-250/0.01]-P[0.8-1.8/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSF2-[50-250/0.01]-P[0.8-1.9/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSF2.5-[50-250/0.01]-P[0.8-2.4/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSF3-[40-300/0.01]-P[1-2.9/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSF3.5-[50-300/0.01]-P[1.5-3.4/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSF4-[50-300/0.01]-P[1.5-3.9/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSF4.5-[50-300/0.01]-P[2.5-4.4/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSF5-[50-350/0.01]-P[3-4.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF5.5-[50-350/0.01]-P[3.5-5.4/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF6-[50-350/0.01]-P[4-5.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF6.5-[50-350/0.01]-P[4.5-6.4/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF7-[50-350/0.01]-P[4.9-6.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF8-[50-350/0.01]-P[5.9-7.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF9-[50-350/0.01]-P[6.9-8.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF10-[50-350/0.01]-P[7.9-9.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSF12-[50-350/0.01]-P[8.9-11.9/0.01]-N[15-300/1]-E[0.02-0.05/0.01]
GW-EHSFE1-[50-150/0.01]-P[0.6-0.9/0.01]-N[15-135/1]-E[0.02-0.05/0.01]
GW-EHSFE1.1-[50-200/0.01]-P[0.6-1/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSFE1.2-[50-200/0.01]-P[0.6-1.1/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSFE1.3-[50-200/0.01]-P[0.6-1.2/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSFE1.4-[50-200/0.01]-P[0.6-1.3/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSFE1.5-[50-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]-E[0.02-0.05/0.01]
GW-EHSFE1.6-[50-250/0.01]-P[0.8-1.5/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSFE1.7-[50-250/0.01]-P[0.8-1.6/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSFE1.8-[50-250/0.01]-P[0.8-1.7/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSFE1.9-[50-250/0.01]-P[0.8-1.8/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSFE2-[50-250/0.01]-P[0.8-1.9/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSFE2.5-[50-250/0.01]-P[0.8-2.4/0.01]-N[15-235/1]-E[0.02-0.05/0.01]
GW-EHSFE3-[50-300/0.01]-P[1-2.9/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSFE3.5-[50-300/0.01]-P[1.5-3.4/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSFE4-[50-300/0.01]-P[1.5-3.9/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSFE4.5-[50-300/0.01]-P[2.5-4.4/0.01]-N[15-280/1]-E[0.02-0.05/0.01]
GW-EHSFE5-[50-350/0.01]-P[3-4.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE5.5-[50-350/0.01]-P[3.5-5.4/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE6-[50-350/0.01]-P[4-5.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE6.5-[50-350/0.01]-P[4.5-6.4/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE7-[50-350/0.01]-P[4.9-6.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE8-[50-350/0.01]-P[5.9-7.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE9-[50-350/0.01]-P[6.9-8.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE10-[50-350/0.01]-P[7.9-9.9/0.01]-N[15-330/1]-E[0.02-0.05/0.01]
GW-EHSFE12-[50-350/0.01]-P[8.9-11.9/0.01]-N[15-300/1]-E[0.02-0.05/0.01]
GW-EHSJF4-[60-300/0.01]-P[1.5-3.9/0.01]-N[30-280/1]-E[0.02-0.05/0.01]
GW-EHSJF4.5-[60-300/0.01]-P[2.5-4.4/0.01]-N[30-280/1]-E[0.02-0.05/0.01]
GW-EHSJF5-[50-350/0.01]-P[3-4.9/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
GW-EHSJF5.5-[60-350/0.01]-P[3.5-5.4/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
GW-EHSJF6-[60-350/0.01]-P[4-5.9/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
GW-EHSJF6.5-[60-350/0.01]-P[4.5-6.4/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
GW-EHSJF7-[60-350/0.01]-P[4.9-6.9/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
GW-EHSJF8-[60-350/0.01]-P[5.9-7.9/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
GW-EHSJF9-[60-350/0.01]-P[6.9-8.9/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
GW-EHSJF10-[50-350/0.01]-P[7.9-9.9/0.01]-N[30-330/1]-E[0.02-0.05/0.01]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSTip diameter tolerance (Reference tolerance) Head thickness D (Shaft diameter)
(mm)
P (Tip diameter)
(mm)
Gas release shape L (L dimension)
(mm)
N
(mm)
E (Facet cutting width)
(mm)
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)10.6 ~ 0.9Single flat cutting50 ~ 15015 ~ 1350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.10.6 ~ 1Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.20.6 ~ 1.1Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.30.6 ~ 1.2Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.40.6 ~ 1.3Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.50.6 ~ 1.4Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.60.8 ~ 1.5Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.70.8 ~ 1.6Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.80.8 ~ 1.7Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)1.90.8 ~ 1.8Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)20.8 ~ 1.9Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)2.50.8 ~ 2.4Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)31 ~ 2.9Single flat cutting40 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)3.51.5 ~ 3.4Single flat cutting50 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)41.5 ~ 3.9Single flat cutting50 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)4.52.5 ~ 4.4Single flat cutting50 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)53 ~ 4.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)5.53.5 ~ 5.4Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)64 ~ 5.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)6.54.5 ~ 6.4Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)74.9 ~ 6.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)85.9 ~ 7.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)96.9 ~ 8.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)107.9 ~ 9.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0054mm(T4)128.9 ~ 11.9Single flat cutting50 ~ 35015 ~ 3000.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)10.6 ~ 0.9Single flat cutting50 ~ 15015 ~ 1350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.10.6 ~ 1Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.20.6 ~ 1.1Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.30.6 ~ 1.2Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.40.6 ~ 1.3Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.50.6 ~ 1.4Single flat cutting50 ~ 20015 ~ 1850.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.60.8 ~ 1.5Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.70.8 ~ 1.6Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.80.8 ~ 1.7Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)1.90.8 ~ 1.8Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)20.8 ~ 1.9Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)2.50.8 ~ 2.4Single flat cutting50 ~ 25015 ~ 2350.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)31 ~ 2.9Single flat cutting50 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)3.51.5 ~ 3.4Single flat cutting50 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)41.5 ~ 3.9Single flat cutting50 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)4.52.5 ~ 4.4Single flat cutting50 ~ 30015 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)53 ~ 4.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)5.53.5 ~ 5.4Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)64 ~ 5.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)6.54.5 ~ 6.4Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)74.9 ~ 6.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)85.9 ~ 7.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)96.9 ~ 8.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)107.9 ~ 9.9Single flat cutting50 ~ 35015 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 10-0.01/-0.024mm(T4)128.9 ~ 11.9Single flat cutting50 ~ 35015 ~ 3000.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0056mm(JIS)41.5 ~ 3.9Single flat cutting60 ~ 30030 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0056mm(JIS)4.52.5 ~ 4.4Single flat cutting60 ~ 30030 ~ 2800.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0056mm(JIS)53 ~ 4.9Single flat cutting50 ~ 35030 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0056mm(JIS)5.53.5 ~ 5.4Single flat cutting60 ~ 35030 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0056mm(JIS)64 ~ 5.9Single flat cutting60 ~ 35030 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0056mm(JIS)6.54.5 ~ 6.4Single flat cutting60 ~ 35030 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0056mm(JIS)74.9 ~ 6.9Single flat cutting60 ~ 35030 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0058mm(JIS)85.9 ~ 7.9Single flat cutting60 ~ 35030 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0058mm(JIS)96.9 ~ 8.9Single flat cutting60 ~ 35030 ~ 3300.02 ~ 0.05
1 Piece(s) 10 Day(s) or more 100/-0.0058mm(JIS)107.9 ~ 9.9Single flat cutting50 ~ 35030 ~ 3300.02 ~ 0.05

Loading...

 

Basic Information

Material SKH51 Shaft diameter tolerance (Reference tolerance) 0/-0.02 Surface treatment No
Tip shape No Character engraving type No Number of engraving characters No

Tech Support

Mold
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)