(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Straight Core Pins With Tip Processed -Shaft Diameter (P) Designation (0.01mm Increments) Type-

Straight Core Pins With Tip Processed -Shaft Diameter (P) Designation (0.01mm Increments) Type-

Click this image to zoom it.

Move the mouse over the image to zoom

  • Change

This is a straight core pin with a machined tip with a specified shaft diameter (P) of 0.01mm.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CPABLB1-[10-100/0.01]-P[0.8-0.99/0.01]
CPABLB1.5-[10-100/0.01]-P[1-1.49/0.01]
CPABLB2-[10-100/0.01]-P[1.5-1.99/0.01]
CPABLB2.5-[10-100/0.01]-P[2-2.49/0.01]
CPABLC1-[10-100/0.01]-P[0.8-0.99/0.01]
CPABLC1.5-[10-100/0.01]-P[1-1.49/0.01]
CPABLC2-[10-100/0.01]-P[1.5-1.99/0.01]
CPABLC2.5-[10-100/0.01]-P[2-2.49/0.01]
CPABLG1-[10-100/0.01]-P[0.8-0.99/0.01]-K[20-60/0.5]
CPABLG1.5-[10-100/0.01]-P[1-1.49/0.01]-K[20-60/0.5]
CPABLG2-[10-100/0.01]-P[1.5-1.99/0.01]-K[20-60/0.5]
CPABLG2.5-[10-100/0.01]-P[2-2.49/0.01]-K[20-60/0.5]
CPABLR1-[10-100/0.01]-P[0.8-0.99/0.01]
CPABLR1.5-[10-100/0.01]-P[1-1.49/0.01]
CPABLR2-[10-100/0.01]-P[1.5-1.99/0.01]
CPABLR2.5-[10-100/0.01]-P[2-2.49/0.01]
CPABLT1-[10-100/0.01]-P[0.8-0.99/0.01]-F[10-99.7/0.01]-K[1-45/1]
CPABLT1.5-[10-100/0.01]-P[1-1.49/0.01]-F[10-99.7/0.01]-K[1-45/1]
CPABLT2-[10-100/0.01]-P[1.5-1.99/0.01]-F[10-99.7/0.01]-K[1-45/1]
CPABLT2.5-[10-100/0.01]-P[2-2.49/0.01]-F[10-99.7/0.01]-K[1-45/1]
CPDBLB1-[10-100/0.01]-P[0.8-0.99/0.01]
CPDBLB1.5-[10-100/0.01]-P[1-1.49/0.01]
CPDBLB2-[10-100/0.01]-P[1.5-1.99/0.01]
CPDBLB2.5-[10-100/0.01]-P[2-2.49/0.01]
CPDBLB3-[10-100/0.01]-P[2.5-2.99/0.01]
CPDBLB3.5-[10-120/0.01]-P[3-3.49/0.01]
CPDBLB4-[10-120/0.01]-P[3.5-3.99/0.01]
CPDBLB4.5-[10-120/0.01]-P[4-4.49/0.01]
CPDBLB5-[10-120/0.01]-P[4.5-4.99/0.01]
CPDBLB5.5-[10-120/0.01]-P[5-5.49/0.01]
CPDBLB6-[10-120/0.01]-P[5.5-5.99/0.01]
CPDBLB6.5-[10-120/0.01]-P[6-6.49/0.01]
CPDBLB7-[10-120/0.01]-P[6.5-6.99/0.01]
CPDBLB8-[10-120/0.01]-P[7-7.99/0.01]
CPDBLB10-[10-120/0.01]-P[8-9.99/0.01]
CPDBLB13-[10-120/0.01]-P[10-12.99/0.01]
CPDBLB16-[10-120/0.01]-P[13-15.99/0.01]
CPDBLB20-[10-120/0.01]-P[16-19.99/0.01]
CPDBLC1-[10-100/0.01]-P[0.8-0.99/0.01]
CPDBLC1.5-[10-100/0.01]-P[1-1.49/0.01]
CPDBLC2-[10-100/0.01]-P[1.5-1.99/0.01]
CPDBLC2.5-[10-100/0.01]-P[2-2.49/0.01]
CPDBLC3-[10-100/0.01]-P[2.5-2.99/0.01]
CPDBLC3.5-[10-120/0.01]-P[3-3.49/0.01]
CPDBLC4-[10-120/0.01]-P[3.5-3.99/0.01]
CPDBLC4.5-[10-120/0.01]-P[4-4.49/0.01]
CPDBLC5-[10-120/0.01]-P[4.5-4.99/0.01]
CPDBLC5.5-[10-120/0.01]-P[5-5.49/0.01]
CPDBLC6-[10-120/0.01]-P[5.5-5.99/0.01]
CPDBLC6.5-[10-120/0.01]-P[6-6.49/0.01]
CPDBLC7-[10-120/0.01]-P[6.5-6.99/0.01]
CPDBLC8-[10-120/0.01]-P[7-7.99/0.01]
CPDBLC10-[10-120/0.01]-P[8-9.99/0.01]
CPDBLC13-[10-120/0.01]-P[10-12.99/0.01]
CPDBLC16-[10-120/0.01]-P[13-15.99/0.01]
CPDBLC20-[10-120/0.01]-P[16-19.99/0.01]
CPDBLG1-[10-100/0.01]-P[0.8-0.99/0.01]-K[20-60/0.5]
CPDBLG1.5-[10-100/0.01]-P[1-1.49/0.01]-K[20-60/0.5]
CPDBLG2-[10-100/0.01]-P[1.5-1.99/0.01]-K[20-60/0.5]
CPDBLG2.5-[10-100/0.01]-P[2-2.49/0.01]-K[20-60/0.5]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Shaft diameter tolerance L dimension tolerance D/P (Shaft diameter)
(mm)
Tip shape No. (Nominal diameter)
(mm)
L (L dimension)
(mm)
F
(mm)
K (Tip angle)
(°)
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.10.8 ~ 0.99B110 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.11 ~ 1.49B1.510 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.11.5 ~ 1.99B210 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.12 ~ 2.49B2.510 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.020.8 ~ 0.99C110 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.021 ~ 1.49C1.510 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.021.5 ~ 1.99C210 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.022 ~ 2.49C2.510 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.10.8 ~ 0.99G110 ~ 100-20 ~ 60
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.11 ~ 1.49G1.510 ~ 100-20 ~ 60
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.11.5 ~ 1.99G210 ~ 100-20 ~ 60
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.12 ~ 2.49G2.510 ~ 100-20 ~ 60
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.020.8 ~ 0.99R110 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.021 ~ 1.49R1.510 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.021.5 ~ 1.99R210 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.022 ~ 2.49R2.510 ~ 100--
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.020.8 ~ 0.99T110 ~ 10010 ~ 99.71 ~ 45
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.021 ~ 1.49T1.510 ~ 10010 ~ 99.71 ~ 45
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.021.5 ~ 1.99T210 ~ 10010 ~ 99.71 ~ 45
1 Piece(s) 10 Day(s) or more 10MAS1C-0.01/-0.020/-0.022 ~ 2.49T2.510 ~ 10010 ~ 99.71 ~ 45
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.10.8 ~ 0.99B110 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.11 ~ 1.49B1.510 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.11.5 ~ 1.99B210 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.12 ~ 2.49B2.510 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.12.5 ~ 2.99B310 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.13 ~ 3.49B3.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.13.5 ~ 3.99B410 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.14 ~ 4.49B4.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.14.5 ~ 4.99B510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.15 ~ 5.49B5.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.15.5 ~ 5.99B610 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.16 ~ 6.49B6.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.16.5 ~ 6.99B710 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.17 ~ 7.99B810 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.18 ~ 9.99B1010 ~ 120--
1 Piece(s) 10 Day(s) or more 10SKD61-0.01/-0.020/-0.110 ~ 12.99B1310 ~ 120--
1 Piece(s) 10 Day(s) or more 10SKD61-0.01/-0.020/-0.113 ~ 15.99B1610 ~ 120--
1 Piece(s) 10 Day(s) or more 10SKD61-0.01/-0.020/-0.116 ~ 19.99B2010 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.020.8 ~ 0.99C110 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.021 ~ 1.49C1.510 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.021.5 ~ 1.99C210 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.022 ~ 2.49C2.510 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.022.5 ~ 2.99C310 ~ 100--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.023 ~ 3.49C3.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.023.5 ~ 3.99C410 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.024 ~ 4.49C4.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.024.5 ~ 4.99C510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.025 ~ 5.49C5.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.025.5 ~ 5.99C610 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.026 ~ 6.49C6.510 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.026.5 ~ 6.99C710 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.027 ~ 7.99C810 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.028 ~ 9.99C1010 ~ 120--
1 Piece(s) 10 Day(s) or more 10SKD61-0.01/-0.020/-0.0210 ~ 12.99C1310 ~ 120--
1 Piece(s) 10 Day(s) or more 10SKD61-0.01/-0.020/-0.0213 ~ 15.99C1610 ~ 120--
1 Piece(s) 10 Day(s) or more 10SKD61-0.01/-0.020/-0.0216 ~ 19.99C2010 ~ 120--
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.10.8 ~ 0.99G110 ~ 100-20 ~ 60
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.11 ~ 1.49G1.510 ~ 100-20 ~ 60
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.11.5 ~ 1.99G210 ~ 100-20 ~ 60
1 Piece(s) 9 Day(s) or more 10SKD61-0.01/-0.020/-0.12 ~ 2.49G2.510 ~ 100-20 ~ 60

Loading...

 

Basic Information

Shape type With tip shape Quenching Hardening steel Head thickness 4mm(T4)
Gas release shape No Character engraving type No Number of engraving characters No

Tech Support

Mold
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)