(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Straight Core Pins With Engraving -Concave Character / Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-

Straight Core Pins With Engraving -Concave Character / Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.01mm Increments) Type-

Click this image to zoom it.

Move the mouse over the image to zoom

This is a straight core pin with an engraving that allows concave characters to be written on the end surface.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CPH1M0.6-[10-100/0.01]-*
CPH1M0.7-[10-100/0.01]-*
CPH1M0.8-[10-100/0.01]-*
CPH1M0.9-[10-100/0.01]-*
CPH1M1-[10-100/0.01]-*
CPH1M1.1-[10-100/0.01]-*
CPH1M1.2-[10-100/0.01]-*
CPH1M1.3-[10-100/0.01]-*
CPH1M1.4-[10-100/0.01]-*
CPH1M1.5-[10-100/0.01]-*
CPH1M1.6-[10-100/0.01]-*
CPH1M1.7-[10-100/0.01]-*
CPH1M1.8-[10-100/0.01]-*
CPH1M1.9-[10-100/0.01]-*
CPH1M2-[10-100/0.01]-*
CPH1M2.5-[10-100/0.01]-*
CPH1M3-[10-100/0.01]-*
CPH1M3.5-[10-120/0.01]-*
CPH1M4-[10-120/0.01]-*
CPH1M4.5-[10-120/0.01]-*
CPH1M5-[10-150/0.01]-*
CPH1M5.5-[10-150/0.01]-*
CPH1M6-[10-150/0.01]-*
CPH1M6.5-[10-150/0.01]-*
CPH1M7-[10-150/0.01]-*
CPH1M8-[10-150/0.01]-*
CPH1M10-[10-150/0.01]-*
CPH2M1-[10-100/0.01]-**
CPH2M1.1-[10-100/0.01]-**
CPH2M1.2-[10-100/0.01]-**
CPH2M1.3-[10-100/0.01]-**
CPH2M1.4-[10-100/0.01]-**
CPH2M1.5-[10-100/0.01]-**
CPH2M1.6-[10-100/0.01]-**
CPH2M1.7-[10-100/0.01]-**
CPH2M1.8-[10-100/0.01]-**
CPH2M1.9-[10-100/0.01]-**
CPH2M2-[10-100/0.01]-**
CPH2M2.5-[10-100/0.01]-**
CPH2M3-[10-100/0.01]-**
CPH2M3.5-[10-120/0.01]-**
CPH2M4-[10-120/0.01]-**
CPH2M4.5-[10-120/0.01]-**
CPH2M5-[10-150/0.01]-**
CPH2M5.5-[10-150/0.01]-**
CPH2M6-[10-150/0.01]-**
CPH2M6.5-[10-150/0.01]-**
CPH2M7-[10-150/0.01]-**
CPH2M8-[10-150/0.01]-**
CPH2M10-[10-150/0.01]-**
CPH3M1.5-[10-100/0.01]-***
CPH3M1.6-[10-100/0.01]-***
CPH3M1.7-[10-100/0.01]-***
CPH3M1.8-[10-100/0.01]-***
CPH3M1.9-[10-100/0.01]-***
CPH3M2-[10-100/0.01]-***
CPH3M2.5-[10-100/0.01]-***
CPH3M3-[10-120/0.01]-***
CPH3M3.5-[10-120/0.01]-***
CPH3M4-[10-120/0.01]-***
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSShaft diameter tolerance D/P (Shaft diameter)
(mm)
Number of engraving characters No. (Nominal diameter)
(mm)
L (L dimension)
(mm)
Engraving character designation
1 Piece(s) 10 Day(s) or more 100/-0.0050.61 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0050.71 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0050.81 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0050.91 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00511 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.11 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.21 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.31 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.41 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.51 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.61 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.71 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.81 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.91 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00521 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0052.51 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00531 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0053.51 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00541 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0054.51 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00551 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0055.51 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00561 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0056.51 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00571 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00581 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.005101 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00512 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.12 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.22 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.32 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.42 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.52 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.62 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.72 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.82 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.92 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00522 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0052.52 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00532 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0053.52 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00542 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0054.52 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00552 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0055.52 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00562 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0056.52 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00572 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00582 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.005102 characters-10 ~ 150※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.53 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.63 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.73 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.83 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0051.93 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00523 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0052.53 characters-10 ~ 100※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00533 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.0053.53 characters-10 ~ 120※Designation by WOS
1 Piece(s) 10 Day(s) or more 100/-0.00543 characters-10 ~ 120※Designation by WOS

Loading...

 

Basic Information

Shape type With engraving Material SKH51 Quenching Hardening steel
L dimension tolerance +0.02/0 Head thickness 4mm(T4) Tip shape No
Gas release shape No Character engraving type Concave character

Tech Support

Mold
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)