(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

[High Precision] X / XY / Z-Axis Stages - Selectable

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

You can freely choose the feed position, feed method, clamp method, and type of grease.

(i)Caution

Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
FSXC25-A-[B,N]-S-G
FSXC25-AR-[B,N]-S-G
FSXC25-AZ-N-S-G
FSXC25-C-[B,N]-S-G
FSXC25-CR-[B,N]-S-G
FSXC25-CZ-N-S-G
FSXC40-A-[B,M,N]-S-G
FSXC40-AR-[B,M,N]-S-G
FSXC40-AZ-N-S-G
FSXC40-C-[B,M,N]-S-G
FSXC40-CR-[B,M,N]-S-G
FSXC40-CZ-N-S-G
FSXC60-A-[B,M,N]-S-G
FSXC60-AR-[B,M,N]-S-G
FSXC60-AZ-N-S-G
FSXC60-C-[B,M,N]-S-G
FSXC60-CR-[B,M,N]-S-G
FSXC60-CZ-N-S-G
FSXC80-A-[M,N]-S-G
FSXC80-AR-[M,N]-S-G
FSXC80-AZ-N-S-G
FSXC80-C-[M,N]-S-G
FSXC80-CR-[M,N]-S-G
FSXC80-CZ-N-S-G
FSXR25-A-[B,F,N]-S-[G,R]
FSXR25-AR-[B,F,N]-S-[G,R]
FSXR25-AZ-[B,F,N]-S-[G,R]
FSXR25-AZR-[B,F,N]-S-[G,R]
FSXR25-C-[B,F,N]-S-[G,R]
FSXR25-CR-[B,F,N]-S-[G,R]
FSXR25-CZ-[B,F,N]-S-[G,R]
FSXR25-CZR-[B,F,N]-S-[G,R]
FSXR40-A-[B,F,J,M,N]-[H,S]-[G,R]
FSXR40-AR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR40-AZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR40-AZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR40-C-[B,F,J,M,N]-[H,P,S]-[G,R]
FSXR40-CR-[B,F,J,M,N]-[H,P,S]-[G,R]
FSXR40-CZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR40-CZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR50-A-[B,F,J,M,N]-[H,S]-[G,R]
FSXR50-AR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR50-AZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR50-AZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR50-C-[B,F,J,M,N]-[H,P,S]-[G,R]
FSXR50-CR-[B,F,J,M,N]-[H,P,S]-[G,R]
FSXR50-CZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR50-CZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR60-A-[B,F,J,M,N]-[H,S]-[G,R]
FSXR60-AR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR60-AZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR60-AZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR60-C-[B,F,J,M,N]-[H,P,S]-[G,R]
FSXR60-CR-[B,F,J,M,N]-[H,P,S]-[G,R]
FSXR60-CZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR60-CZR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR70-A-[B,F,J,M,N]-[H,S]-[G,R]
FSXR70-AR-[B,F,J,M,N]-[H,S]-[G,R]
FSXR70-AZ-[B,F,J,M,N]-[H,S]-[G,R]
FSXR70-AZR-[B,F,J,M,N]-[H,S]-[G,R]

Minimum order quantity	Days to Ship	RoHS	Table Size (Length) L (Range Selectable) (mm)	Table Size (Width) W (Range Selectable) (mm)	Load Capacity (Range Selectable) (N)	Travel Distance (X-Axis) (Range Selectable) (mm)	Travel Distance (Y-Axis) (Range Selectable) (mm)	Table Material	Table Surface Treatment	Travel Guide	Table Size (Thickness) H (Range Selectable) (mm)	Table Size (Length) L (mm)	Table Size (Width) W (mm)	Load Capacity (N)	Travel Distance (X-Axis) (mm)	Travel Distance (Y-Axis) (mm)	Table Size (Thickness) H (mm)	Travel Distance (Z-Axis) (mm)	Table Parallelism (µm)	Moment Rigidity (Pitching) ("/N•cm)	Moment Rigidity (Yawing) ("/N•cm)	Moment Rigidity (Rolling) ("/N•cm)	Feed Knob Position	Reversed	Clamp Method Selection	Feeding Method Selection	Grease Selection
1 Piece(s)	12 Day(s) or more	10	~25	~25	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	1~15	25	25	9.8	±3.2	-	15	-	30	3.03	2.85	1.80	Center	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	~25	~25	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	1~15	25	25	9.8	±3.2	-	15	-	30	3.03	2.85	1.80	Center	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	~25	~25	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	1~15	25	25	9.8	±3.2	-	15	-	30	3.03	2.85	1.80	Center	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	~25	~25	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	1~15	25	25	9.8	±3.2	-	15	-	30	3.03	2.85	1.80	Side	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	~25	~25	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	1~15	25	25	9.8	±3.2	-	15	-	30	3.03	2.85	1.80	Side	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	~25	~25	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	1~15	25	25	9.8	±3.2	-	15	-	30	3.03	2.85	1.80	Side	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	40	40	19.6	±6.5	-	20	-	30	0.38	0.42	0.28	Center	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	40	40	19.6	±6.5	-	20	-	30	0.38	0.42	0.28	Center	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	40	40	19.6	±6.5	-	20	-	30	0.38	0.42	0.28	Center	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	40	40	19.6	±6.5	-	20	-	30	0.38	0.42	0.28	Side	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	40	40	19.6	±6.5	-	20	-	30	0.38	0.42	0.28	Side	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	5~30	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	40	40	19.6	±6.5	-	20	-	30	0.38	0.42	0.28	Side	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	30.1~50	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	60	60	49	±6.5	-	20	-	30	0.12	0.11	0.07	Center	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	30.1~50	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	60	60	49	±6.5	-	20	-	30	0.12	0.11	0.07	Center	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	30.1~50	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	60	60	49	±6.5	-	20	-	30	0.12	0.11	0.07	Center	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	30.1~50	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	60	60	49	±6.5	-	20	-	30	0.12	0.11	0.07	Side	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	30.1~50	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	60	60	49	±6.5	-	20	-	30	0.12	0.11	0.07	Side	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	30.1~50	Up to ±10mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	60	60	49	±6.5	-	20	-	30	0.12	0.11	0.07	Side	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Standard	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Right and Left	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Center	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Standard	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Right and Left	Standard [S]	Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	50.1~100	±10 to 30mm	-	Aluminum Alloy	Black Anodize	Cross Roller	15.1~20	80	80	98	±12.5	-	20	-	30	0.05	0.05	0.04	Side	Up/Down	Standard [S]	Standard Micrometer Head [N]	G (Standard)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Center	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Center	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Center	Up/Down	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Center	Top/Bottom, Right/Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Side	Standard	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Side	Right and Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Side	Up/Down	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	~25	~25	30.1~50	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	1~15	25	25	39.2	±3.2	-	12	-	30	1.9	1.1	1.1	Side	Top/Bottom, Right/Left	Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Center	Standard	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Center	Right and Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Center	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Center	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Side	Standard	Disc Clamp [H] / Opposed Clamp [P] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Side	Right and Left	Disc Clamp [H] / Opposed Clamp [P] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Side	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	26~40	26~40	50.1~100	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	40	40	98	±6.5	-	16	-	15	0.42	0.35	0.21	Side	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Center	Standard	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Center	Right and Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Center	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Center	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Side	Standard	Disc Clamp [H] / Opposed Clamp [P] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Side	Right and Left	Disc Clamp [H] / Opposed Clamp [P] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Side	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	50	50	147	±6.5	-	16	-	15	0.15	0.14	0.09	Side	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Center	Standard	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Center	Right and Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Center	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Center	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Side	Standard	Disc Clamp [H] / Opposed Clamp [P] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Side	Right and Left	Disc Clamp [H] / Opposed Clamp [P] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Side	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	41~60	41~60	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	60	60	196	±6.5	-	16	-	15	0.08	0.08	0.05	Side	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	70	70	225.4	±6.5	-	18	-	15	0.06	0.05	0.03	Center	Standard	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	70	70	225.4	±6.5	-	18	-	15	0.06	0.05	0.03	Center	Right and Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	70	70	225.4	±6.5	-	18	-	15	0.06	0.05	0.03	Center	Up/Down	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)
1 Piece(s)	12 Day(s) or more	10	61~90	61~90	100.1~	Up to ±10mm	-	[Stainless Steel] SUS440C	无电解镀镍	Linear Ball	15.1~20	70	70	225.4	±6.5	-	18	-	15	0.06	0.05	0.03	Center	Top/Bottom, Right/Left	Disc Clamp [H] / Standard [S]	Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]	G (Standard) / R (For Clean Environment)

Basic Information

Through Hole (Table Center Hole)	Not Provided

Configure

132 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Table Size (Length) L (Range Selectable)(mm)
~25

26~40

41~60

61~90
Clear
Table Size (Width) W (Range Selectable)(mm)
~25

26~40

41~60

61~90
Clear
Load Capacity (Range Selectable)(N)
- 5~30
- 30.1~50
- 50.1~100
- 100.1~
Clear
Travel Distance (X-Axis) (Range Selectable)(mm)
Up to ±10mm

±10 to 30mm
Clear
Travel Distance (Y-Axis) (Range Selectable)(mm)
Up to ±10mm

±10 to 30mm
Clear
Table Material
- Stainless Steel
  - SUS440C
- Aluminum Alloy
Clear
Table Surface Treatment
- Black Anodize
- 无电解镀镍
Clear
Travel Guide
- Cross Roller
- Linear Ball
Clear
Table Size (Thickness) H (Range Selectable)(mm)
1~15

15.1~20

20.1~25

30.1~35

35.1~40
Clear
Table Size (Length) L(mm)
25

40

50

60

70

80
Clear
Table Size (Width) W(mm)
25

40

50

60

70

80
Clear
Load Capacity(N)
9.8

19.6

38.2

39.2

49

95.2

98

144.2

147

192.1

196

219.7

225.4

255.8

264.6
Clear
Travel Distance (X-Axis)(mm)
±3.2

±6.5

±12.5
Clear
Travel Distance (Y-Axis)(mm)
±3.2

±6.5

±12.5
Clear
Table Size (Thickness) H(mm)
12

15

16

18

20

24

32

36

40
Clear
Travel Distance (Z-Axis)(mm)
±3.2

±6.5

±12.5
Clear
Feed Knob Position
- Center
- Side
Clear
Reversed
- Standard
- Right and Left
- Up/Down
- Top/Bottom, Right/Left
Clear
Clamp Method Selection
- Disc Clamp [H]
- Opposed Clamp [P]
- Standard [S]
Clear
Feeding Method Selection
- Feed Screw Pitch 0.5 [B]
- Screw with Hex Socket, Pitch 0.5 [F]
- Feed Screw Pitch 1.0 [J]
- Coarse/Fine Micrometer Head [M]
- Digital Micrometer Head [D]
- Standard Micrometer Head [N]
Clear
Grease Selection
- G (Standard)
- R (For Clean Environment)
Clear
type
- FSXC
- FSXR
- FSXYR
- FSZR
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

12 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

[High Precision] X / XY / Z-Axis Stages - Selectable

(i)Caution

Part Number

Basic Information

Configure

Specification/Dimensions

Table Size (Length) L (Range Selectable)(mm)

Table Size (Width) W (Range Selectable)(mm)

Load Capacity (Range Selectable)(N)

Travel Distance (X-Axis) (Range Selectable)(mm)

Travel Distance (Y-Axis) (Range Selectable)(mm)

Table Material

Table Surface Treatment

Travel Guide

Table Size (Thickness) H (Range Selectable)(mm)

Table Size (Length) L(mm)

Table Size (Width) W(mm)

Load Capacity(N)

Travel Distance (X-Axis)(mm)

Travel Distance (Y-Axis)(mm)

Table Size (Thickness) H(mm)

Travel Distance (Z-Axis)(mm)

Feed Knob Position

Reversed

Clamp Method Selection

Feeding Method Selection

Grease Selection

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB