(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Urethane Sheets with Oil-Resistant Adhesives

Urethane Sheets with Oil-Resistant Adhesives

A urethane sheet with a seal that allows for adhesion even in areas with oil residue.

TypeMaterialHardnessColorAdhesive Surface
A, B Selectable TypeA, B Configurable Type
NTUSNTUSFEther Type
Polyurethane
Shore A95Natural ColorSpecial Acrylic Adhesive
NTUHNTUHFShore A90
NTUMNTUMFEster Type
Polyurethane
Shore A70
NTULNTULFShore A50
Properties P.389
Equivalent to the urethane of the similar hardness.

Specifications

Part Number-A-B-F-G-N
NTUS3
NTUH3
NTUSF4H2
-
-
-
300
100
150
-
-
-
100
100
100


-


F140


-


G40


-


N3
■ A, B Selectable - Standard Type
Part NumberSelection
TypeTAB
NTUS
NTUH
NTUM
NTUL
1100
200
300
400
500
100
200
300
400
500
2
3
■ A, B Configurable - Standard / Hole Type
Part Number1mm Increment (A≥B)0.5mm IncrementN
TypeNominalTABFG
NTUSF
NTUHF
NTUMF
NTULF
1H
2H
3H
4H
6H
110~50010~5005~495
(1H Type)

9~491
(2H, 4H Types)

9~245
(3H, 6H Types)
5~495
(1H, 2H, 4H Types)

9~491
(3H, 6H Types)
3
4
5
6
8
10
2
3
Dimension F Specification Range: For 1H: d/2+2.5≤F≤A-d/2-2.5, for 2H, 4H: d+5≤F≤A-d-5, for 3H, 6H: d+5≤F≤A/2-d/2-2.5.
Dimension G Specification Range: For 1H, 2H, 3H: d/2+2.5≤G≤B-d/2-2.5, for 4H, 6H: d+5≤G≤B-d-5.
The upper limits of A and B are different between A, B Selectable Type and A, B Configurable Type.

Alterations

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
NTUH1-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUH2-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUH3-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUHF1-[10-500/1]-[10-500/1]
NTUHF1H1-[10-500/1]-[10-500/1]-F[5-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF1H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF1H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF2-[10-500/1]-[10-500/1]
NTUHF2H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF2H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF2H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF3-[10-500/1]-[10-500/1]
NTUHF3H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF3H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF3H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF4H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF4H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF4H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF6H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF6H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUHF6H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUL1-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUL2-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUL3-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTULF1-[10-500/1]-[10-500/1]
NTULF1H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF1H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF1H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF2-[10-500/1]-[10-500/1]
NTULF2H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF2H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF2H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF3-[10-500/1]-[10-500/1]
NTULF3H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF3H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF3H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF4H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF4H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF4H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF6H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF6H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTULF6H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUM1-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUM2-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUM3-[100,​200,​300,​400,​500]-[100,​200,​300,​400,​500]
NTUMF1-[10-500/1]-[10-500/1]
NTUMF1H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF1H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF1H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF2-[10-500/1]-[10-500/1]
NTUMF2H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF2H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF2H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF3-[10-500/1]-[10-500/1]
NTUMF3H1-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF3H2-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF3H3-[10-500/1]-[10-500/1]-F[9-245/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF4H1-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF4H2-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
NTUMF4H3-[10-500/1]-[10-500/1]-F[9-491/0.5]-G[9-495/0.5]-N[3,​4,​5,​6,​8,​10]
Part NumberMinimum order quantityVolume DiscountDays to ShipGrade, Type Thickness T
(mm)
Width A
(mm)
Length B
(mm)
Hardness (Shore, Asker, Penetration) Specifications Hole Machining F
(mm)
G
(mm)
Through Hole Nominal Dia. [N]
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane1100 ~ 500100 ~ 500Shore A90Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane2100 ~ 500100 ~ 500Shore A90Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane3100 ~ 500100 ~ 500Shore A90Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane110 ~ 50010 ~ 500Shore A90Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane110 ~ 50010 ~ 500Shore A90Hole Type1H (One Hole)5 ~ 4915 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane210 ~ 50010 ~ 500Shore A90Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane310 ~ 50010 ~ 500Shore A90Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane210 ~ 50010 ~ 500Shore A90Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane110 ~ 50010 ~ 500Shore A90Hole Type2H (Two Holes)9 ~ 4915 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane210 ~ 50010 ~ 500Shore A90Hole Type2H (Two Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane310 ~ 50010 ~ 500Shore A90Hole Type2H (Two Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane310 ~ 50010 ~ 500Shore A90Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane110 ~ 50010 ~ 500Shore A90Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane210 ~ 50010 ~ 500Shore A90Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane310 ~ 50010 ~ 500Shore A90Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane110 ~ 50010 ~ 500Shore A90Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane210 ~ 50010 ~ 500Shore A90Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane310 ~ 50010 ~ 500Shore A90Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane110 ~ 50010 ~ 500Shore A90Hole Type6H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane210 ~ 50010 ~ 500Shore A90Hole Type6H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ether Polyurethane310 ~ 50010 ~ 500Shore A90Hole Type6H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane1100 ~ 500100 ~ 500Shore A50Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane2100 ~ 500100 ~ 500Shore A50Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane3100 ~ 500100 ~ 500Shore A50Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A50Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A50Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A50Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A50Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A50Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A50Hole Type2H (Two Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A50Hole Type2H (Two Holes)9 ~ 4915 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A50Hole Type2H (Two Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A50Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A50Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A50Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A50Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A50Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A50Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A50Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A50Hole Type6H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A50Hole Type6H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A50Hole Type6H (Six Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane1100 ~ 500100 ~ 500Shore A70Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane2100 ~ 500100 ~ 500Shore A70Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane3100 ~ 500100 ~ 500Shore A70Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A70Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A70Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A70Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A70Hole Type1H (One Hole)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A70Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A70Hole Type2H (Two Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A70Hole Type2H (Two Holes)9 ~ 4915 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A70Hole Type2H (Two Holes)9 ~ 4915 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A70Size ModelNo Drilling Alteration---
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A70Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A70Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A70Hole Type3H (Three Holes)9 ~ 2459 ~ 4913 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane110 ~ 50010 ~ 500Shore A70Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane210 ~ 50010 ~ 500Shore A70Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10
1 Piece(s) 10 Day(s) or more [Standard Urethane] Ester Polyurethane310 ~ 50010 ~ 500Shore A70Hole Type4H (Four Holes)9 ~ 4919 ~ 4953 ~ 10

Loading...

Price list

■A, B Selectable - Standard Type
Part NumberAUnit Price
TypeTB
100200300400500
NTUS (x1.3)
NTUH (x1.0)
NTUM (x1.1)
NTUL (x2.0)



( ) Material Multiplier
1 100  ----
200   ---
300    --
400     -
500      
2 100  ----
200   ---
300    --
400     -
500      
3 100  ----
200   ---
300    --
400     -
500      
■A, B Configurable - Standard / Hole Type
Part NumberAUnit Price
TypeTB
10~100101~200201~300301~400401~500
NTUSF (x1.3)
NTUHF (x1.0)
NTUMF (x1.1)
NTULF (x2.0)



( ) Material Multiplier
1 10~100 ----
101~200  ---
201~300   --
301~400    -
401~500     
2 10~100 ----
101~200  ---
201~300   --
301~400    -
401~500     
3 10~100 ----
101~200  ---
201~300   --
301~400    -
401~500     
The price of this product is the unit price shown in the table multiplied by material multiplier.
(Ex.)Part Number-A-B >>(Unit Price) x (Material Multiplier) = Unit Price of Standard Type
 NTUS1-300-200  

More Information

■Adhesive Strength (180 Degree Peel Strength)
ItemSpecial Acrylic AdhesiveGeneral Acrylic Adhesive (Reference Values)
Adhesive Strength (N)Ordinary Condition1111
* Oiled Surface93
* Oiled Surface: Salad oil is coated on stainless steel plate using absorbent cotton, and measurement is taken after 2 hours.
Testing Method: 180° Peeling Test (25µm thick and 25mm wide PET film bonded to SUS304 plate)
 

Basic Information

Material Urethane With or Without Adhesive Without Adhesive

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)