(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Configurable Plates - SS400 Annealed Material

Configurable Plates - SS400 Annealed Material

[Features]·You can freely select dimensions, tolerances, and finishing methods from small size to large size



[ M ] Material: SS400 Annealed Material
■Features of JIS-S55CN
Treated with anneal heat treatment, its machining distortion is controlled, and suitable for use when warp prevention is concerned.

Specifications

Part Number-A-B-T
Type2-Surface FinishPlate Thickness ToleranceA, B Dimension Tolerance
PVFQM-255-220-18
6-Surface Finish
Part Number0.5mm Increment
2-Surface Finish MethodType(1) Plate Thickness Tolerance
Selection
(2) A, B Dimension Tolerance
Selection
ABT
A≥B
MillingPVFP
Q
N
M
P
Q
N
M
 20~500 20~300 4~50
Rotary GrindingPVR 20~500 20~300 4~50
Surface GrindingPVS 20~500 20~300 4~50
[ ! ]Tolerance should be noted.
2-Surface Finish(4-Side not finished) [ ! ]Tolerance should be noted.
Part Number1mm Increment0.5mm Increment
2-Surface Finish MethodType(1) Plate Thickness Tolerance
Selection
(2) A, B Dimension ToleranceABT
A≥B
MillingSV2FP
Q
N
M
A+5
0
B+5
0
 20~500 10~300 5~50
Rotary GrindingSV2RG 20~500 10~300 5~50
[ ! ]Not all dimensions are applicable.
(1) Plate Thickness Tolerance
2-Surface Finish MethodPQNM
Milling+0.1~+0.30~+0.2±0.1-0.2~0
Rotary Grinding+0.1~+0.30~+0.2±0.1-0.2~0
Surface Grinding+0.1~+0.20~+0.1±0.05-0.1~0
(2) A, B Dimension Tolerance (Applicable to 6-surface finish only)
A, B DimensionPQNM
250mm or less+0.1~+0.30~+0.2±0.1-0.2~0
250.5mm or more+0.1~+0.60~+0.5±0.25-0.5~0
■Precision Standards -Standard Size- (Max. Value)
Item2-Surface Finish Method
MillingRotary GrindingSurface Grinding
Thickness Parallelism (per 100mm)0.050.0120.012
Flatness
(per 100mm)
T4~7.50.10.050.05
T8~15.50.070.030.03
T16~25.50.050.0150.015
T26~500.050.0120.012
Perpendicularity of Reference Plane(Applicable to 6-Surface Finished products only.)0.015 per 100mm
Circumference Chamfering2-Surface FinishDeburring only
6-Surface FinishC0.2~C0.5

Alterations


Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PVFMM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFMN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFMP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFMQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFNM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFNN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFNP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFNQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFPM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFPN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFPP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFPQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFQM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFQN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFQP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVFQQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRMM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRMN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRMP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRMQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRNM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRNN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRNP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRNQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRPM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRPN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRPP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRPQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRQM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRQN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRQP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVRQQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSMM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSMN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSMP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSMQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSNM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSNN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSNP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSNQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSPM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSPN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSPP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSPQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSQM-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSQN-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSQP-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
PVSQQ-[20-500/0.5]-[20-300/0.5]-[4-50/0.5]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSFinish Method Thickness T
(mm)
Length A
(mm)
Width B
(mm)
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 12 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 106-Surface Milled (6F)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 18 Day(s) or more 10Upper-Lower Surface Rotary Grinding (4F2RG)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300
1 Piece(s) 16 Day(s) or more 10Upper-Lower Surface Grinding (4F2G)4 ~ 5020 ~ 50020 ~ 300

Loading...

  1. 1

More Information

Top/Bottom Milled
All Surfaces Milled + Top/Bottom Surfaced
All Surfaces Milled + Top/Bottom Rotary Ground
All Surfaces Milled
Top/Bottom Rotary Ground
 

Basic Information

Material SS400 Annealed Material

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)