(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Shafts - Tapped Pilot Type

Shafts - Tapped Pilot Type

Click this image to zoom it.

Move the mouse over the image to zoom

[Features] Direct drive shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are female thread pilot type.

 

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFIG12-[25-1000/1]-F[2-40/1]-P[6-10/1]-M[4,​5,​6]-N4
PSFIG13-[25-1000/1]-F[2-44/1]-P[6-11/1]-M[4,​5,​6,​8]-N[4,​5]
PSFIG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-M[4,​5,​6,​8,​10]-N[4,​5]
PSFIG16-[30-1200/1]-F[2-56/1]-P[6-14/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6]
PSFIG18-[30-1200/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6]
PSFIG20-[30-1200/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-N[5,​6,​8,​10]
PSFIG25-[35-1200/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-N[6,​8,​10,​12]
PSFIG30-[35-1500/1]-F[2-108/1]-P[9-27/1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
PSFIN12-[25-998/1]-F[2-60/1]-B[3-55/1]-P[5,​6,​8,​10,​12]-N4
PSFIN12-[25-998/1]-F[2-60/1]-B[3-55/1]-PMC[5,​6,​8,​10]-N4
PSFIN12-[25-998/1]-F[2-60/1]-B[3-55/1]-PMS10-N4
PSFIN13-[25-998/1]-F[2-60/1]-B[3-55/1]-P[5,​6,​8,​10,​12]-N[4,​5]
PSFIN13-[25-998/1]-F[2-60/1]-B[3-55/1]-PMC[5,​6,​8,​10,​12]-N[4,​5]
PSFIN13-[25-998/1]-F[2-60/1]-B[3-55/1]-PMS10-N[4,​5]
PSFIN15-[25-998/1]-F[2-60/1]-B[3-55/1]-P[5,​6,​8,​10,​12]-N[4,​5]
PSFIN15-[25-998/1]-F[2-60/1]-B[3-55/1]-PMC[5,​6,​8,​10,​12]-N[4,​5]
PSFIN15-[25-998/1]-F[2-60/1]-B[3-55/1]-PMS[10,​12]-N[4,​5]
PSFIN16-[25-1198/1]-F[2-80/1]-B[3-75/1]-P[5,​6,​8,​10,​12,​16]-N[4,​5,​6]
PSFIN16-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMC[5,​6,​8,​10,​12,​15]-N[4,​5,​6]
PSFIN16-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMS[10,​12,​14]-N[4,​5,​6]
PSFIN18-[25-1198/1]-F[2-80/1]-B[3-75/1]-P[5,​6,​8,​10,​12,​16]-N[4,​5,​6]
PSFIN18-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMC[5,​6,​8,​10,​12,​15,​17]-N[4,​5,​6]
PSFIN18-[25-1198/1]-F[2-80/1]-B[3-75/1]-PMS[10,​12,​14]-N[4,​5,​6]
PSFIN20-[25-1198/1]-F[2-100/1]-B[3-95/1]-P[6,​8,​10,​12,​16,​20]-N[5,​6,​8,​10]
PSFIN20-[25-1198/1]-F[2-100/1]-B[3-95/1]-PMC[6,​8,​10,​12,​15,​17]-N[5,​6,​8,​10]
PSFIN20-[25-1198/1]-F[2-100/1]-B[3-95/1]-PMS[10,​12,​14,​18]-N[5,​6,​8,​10]
PSFIN25-[25-1198/1]-F[2-120/1]-B[3-115/1]-P[8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
PSFIN25-[25-1198/1]-F[2-120/1]-B[3-115/1]-PMC[8,​10,​12,​15,​17,​20]-N[6,​8,​10,​12]
PSFIN25-[25-1198/1]-F[2-120/1]-B[3-115/1]-PMS[10,​12,​14,​18]-N[6,​8,​10,​12]
PSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-P[8,​10,​12,​16,​20,​24,​30]-N[6,​8,​10,​12]
PSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMC[8,​10,​12,​15,​17,​20,​25]-N[6,​8,​10,​12]
PSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMS[10,​12,​14,​18]-N[6,​8,​10,​12]
PSFIQ12-[25-998/1]-B[3-55/1]-N4
PSFIQ16-[25-1198/1]-B[3-75/1]-N[4,​5,​6]
PSFIQ20-[25-1198/1]-B[3-95/1]-N[5,​6,​8,​10]
PSFIQ30-[25-1498/1]-B[3-145/1]-N[6,​8,​10,​12]
PSFIT12-[25-1000/1]-M[4,​5,​6,​8]-N4
PSFIT12-[25-1000/1]-MSC8-N4
PSFIT13-[25-1000/1]-M[4,​5,​6,​8]-N[4,​5]
PSFIT13-[25-1000/1]-MSC8-N[4,​5]
PSFIT15-[25-1000/1]-M[4,​5,​6,​8,​10]-N[4,​5]
PSFIT15-[25-1000/1]-MSC[6,​8,​10]-N[4,​5]
PSFIT16-[30-1200/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6]
PSFIT16-[30-1200/1]-MSC[8,​10]-N[4,​5,​6]
PSFIT18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6]
PSFIT18-[30-1200/1]-MSC[8,​10,​12]-N[4,​5,​6]
PSFIT20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-N[5,​6,​8,​10]
PSFIT20-[30-1200/1]-MSC[8,​10,​12,​14]-N[5,​6,​8,​10]
PSFIT25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-N[6,​8,​10,​12]
PSFIT25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-N[6,​8,​10,​12]
PSFIT30-[35-1500/1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
PSFIT30-[35-1500/1]-MSC[8,​10,​12,​14,​18]-N[6,​8,​10,​12]
PSSFIG12-[25-1000/1]-F[2-40/1]-P[6-10/1]-M[4,​5,​6]-N4
PSSFIG13-[25-1000/1]-F[2-44/1]-P[6-11/1]-M[4,​5,​6,​8]-N[4,​5]
PSSFIG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-M[4,​5,​6,​8,​10]-N[4,​5]
PSSFIG16-[30-1200/1]-F[2-56/1]-P[6-14/1]-M[4,​5,​6,​8,​10]-N[4,​5,​6]
PSSFIG18-[30-1200/1]-F[2-64/1]-P[8-16/1]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6]
PSSFIG20-[30-1200/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-N[5,​6,​8,​10]
PSSFIG25-[35-1200/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-N[6,​8,​10,​12]
PSSFIG30-[35-1500/1]-F[2-108/1]-P[9-27/1]-M[6,​8,​10,​12,​16,​20,​24]-N[6,​8,​10,​12]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSEnd Shape (Left) Material Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Hardness Shaft End Type B
(mm)
Change Tapped Thread M to Fine One [MSC]
(mm)
Change to Fine Thread [PMC]
(mm)
Change to Fine Thread [PMS]
(mm)
F
(mm)
P
(mm)
Tapped (Coarse) [N]
(mm)
Threaded (Coarse) [M]
(mm)
Threaded (Coarse) [P]
(mm)
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1225 ~ 1000Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 406 ~ 1044 ~ 6-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 446 ~ 114 ~ 54 ~ 8-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 526 ~ 134 ~ 54 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 566 ~ 144 ~ 64 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 648 ~ 164 ~ 64 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 688 ~ 175 ~ 104 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2535 ~ 1200Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 888 ~ 226 ~ 124 ~ 16-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Stepped and Tapped----2 ~ 1089 ~ 276 ~ 126 ~ 24-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1225 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55---2 ~ 60-4-5 ~ 12
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1225 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55-5 ~ 10-2 ~ 60-4--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1225 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55--102 ~ 60-4--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55---2 ~ 60-4 ~ 5-5 ~ 12
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55-5 ~ 12-2 ~ 60-4 ~ 5--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55--102 ~ 60-4 ~ 5--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55---2 ~ 60-4 ~ 5-5 ~ 12
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55-5 ~ 12-2 ~ 60-4 ~ 5--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 998Induction Hardened (58HRC~)One End Threaded3 ~ 55--10 ~ 122 ~ 60-4 ~ 5--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1625 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 75---2 ~ 80-4 ~ 6-5 ~ 16
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1625 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 75-5 ~ 15-2 ~ 80-4 ~ 6--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1625 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 75--10 ~ 142 ~ 80-4 ~ 6--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1825 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 75---2 ~ 80-4 ~ 6-5 ~ 16
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1825 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 75-5 ~ 17-2 ~ 80-4 ~ 6--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1825 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 75--10 ~ 142 ~ 80-4 ~ 6--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2025 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 95---2 ~ 100-5 ~ 10-6 ~ 20
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2025 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 95-6 ~ 17-2 ~ 100-5 ~ 10--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2025 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 95--10 ~ 182 ~ 100-5 ~ 10--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2525 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 115---2 ~ 120-6 ~ 12-8 ~ 24
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2525 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 115-8 ~ 20-2 ~ 120-6 ~ 12--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2525 ~ 1198Induction Hardened (58HRC~)One End Threaded3 ~ 115--10 ~ 182 ~ 120-6 ~ 12--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3025 ~ 1498Induction Hardened (58HRC~)One End Threaded3 ~ 145---2 ~ 150-6 ~ 12-8 ~ 30
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3025 ~ 1498Induction Hardened (58HRC~)One End Threaded3 ~ 145-8 ~ 25-2 ~ 150-6 ~ 12--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3025 ~ 1498Induction Hardened (58HRC~)One End Threaded3 ~ 145--10 ~ 182 ~ 150-6 ~ 12--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1225 ~ 998Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.3 ~ 55-----4--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1625 ~ 1198Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.3 ~ 75-----4 ~ 6--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2025 ~ 1198Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.3 ~ 95-----5 ~ 10--
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3025 ~ 1498Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.3 ~ 145-----6 ~ 12--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1225 ~ 1000Induction Hardened (58HRC~)One End Tapped------44 ~ 8-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1225 ~ 1000Induction Hardened (58HRC~)One End Tapped-8----4--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)One End Tapped------4 ~ 54 ~ 8-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)One End Tapped-8----4 ~ 5--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)One End Tapped------4 ~ 54 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)One End Tapped-6 ~ 10----4 ~ 5--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Tapped------4 ~ 64 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Tapped-8 ~ 10----4 ~ 6--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)One End Tapped------4 ~ 64 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)One End Tapped-8 ~ 12----4 ~ 6--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Tapped------5 ~ 104 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Tapped-8 ~ 14----5 ~ 10--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2535 ~ 1200Induction Hardened (58HRC~)One End Tapped------6 ~ 124 ~ 16-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2535 ~ 1200Induction Hardened (58HRC~)One End Tapped-8 ~ 18----6 ~ 12--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Tapped------6 ~ 126 ~ 24-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Tapped-8 ~ 18----6 ~ 12--
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1225 ~ 1000Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 406 ~ 1044 ~ 6-
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1325 ~ 1000Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 446 ~ 114 ~ 54 ~ 8-
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1525 ~ 1000Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 526 ~ 134 ~ 54 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1630 ~ 1200Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 566 ~ 144 ~ 64 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1830 ~ 1200Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 648 ~ 164 ~ 64 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating2030 ~ 1200Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 688 ~ 175 ~ 104 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating2535 ~ 1200Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 888 ~ 226 ~ 124 ~ 16-
1 Piece(s) 10 Day(s) or more 10Tapped[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating3035 ~ 1500Induction Hardened (56HRC~)One End Stepped and Tapped----2 ~ 1089 ~ 276 ~ 126 ~ 24-

Loading...

Basic Information

Basic Shape Solid End Shape (Right) Tapped Pilot Shaft End Perpendicularity Perpendicularity (0.2)
Heat Treatment Induction Hardened Shaft Fit Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)