(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Ball Splines - One End Stepped

Ball Splines - One End Stepped

Click this image to zoom it.

Move the mouse over the image to zoom

A ball spline with a stepped surface on one end. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

(i)Caution

  • Please check the content on our website as the PDF does not contain the most up-to-date information.
Ball Splines - One End Stepped:Related Image
One End SteppedSpline Shafts[ M ]SUJ2 Equivalent Nut
[ M ]SCM415 Equivalent[ H ]Hardness: 58HRC ~
Spline Shaft, Nut[ M ]Material: SUS440C Equivalent[ H ]Hardness: 55HRC ~
Nut 1 pc.Nut 2 pcs.Nut 1 pc.
With Round Flange NutBSDMBSD2MBSDMS
With Compact Flange NutBSDNBSD2N-
With Straight NutBSDSBSD2SBSDSS

Specifications

Part Number-L-F-P
BSDN10
BSDN10G
BSDN10L
-
-
-
300
300
300
-
-
-
F20
F20
F20
-
-
-
P6
P6
P6
Alternative grease types available.
For Days to Ship, Price and Performance, see >> P.340
■Spline Shafts
Part Number1mm IncrementP SelectionD(Y)Mass (kg/m)
TypeNo.LF1-Nut Type2-Nut Type
1-Nut Type2-Nut Typemin~maxmin~max
BSDM
BSDN
BSDS

BSD2M
BSD2N
BSD2S

BSDMS
BSDSS
*660~400(190)60~400When P=3
2≤F≤9
When P=4
2≤F≤16
When P≥5
2≤F≤Px5
345         658~398(188)58~3980.23
*860~400(190)60~400 456        858~398(188)58~3980.39
*1060~600(390)90~600 4568       10.458~598(388)88~5980.65
*1360~600(390)100~600  56810      13.458~598(388)98~5981.11
*1670~600(390)110~600  568101213    16.668~598(388)108~5981.65
2080~ 700130~700    81012131516  20.678~898128~6982.57
2590~ 900150~900    8101213151620 25.888~898148~8984.04
30100~1150170~1150     1012131516202530.898~1148168~11485.85
[ ! ]For BSDMS and BSDSS, only * marked sizes are available, and the Max. L and Y dimensions are in ( ).
[ ! ]For BSDN and BSD2N, only No. 6, 8 and 10 are available.
■Round Flange Nuts, Compact Flange Nuts
No.D
(h6)
LDfHP.C.D.d1d2hWdBBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dynamic Ct
(N • m)
Static C0t
(N • m)
Dynamic C
(kN)
Static C0
(kN)
M01
(N • m)
M02
(N • m)
61425306223.563.16.51.5183.871.22.15360.03
8163224214.88.71.22.15360.04
102140(33)42(41)6(8)32(30)4.584.4(5.3)14(8.5)2519(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.09
132444(36)44(45)7(8)33(34)15(10)-28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.11
163150517404.41851936.211.1563860.2
203563589455.59.55.422.52851548.515.3836110.3
254271655226.519334815.427.717312480.4
3047807510606.6116.5302.527249018.533.321215810.57
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.
■Straight Nuts
No.D
(h6)
Lb t
(+0.05(
0
dαBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dimensions of Key (Included)
ToleranceDynamic Ct
(N m)
Static C0t
(N m)
Dynamic C
(kN)
Static C0
(kN)
M01
(N • m)
M02
(N • m)
B h L1R
ToleranceTolerance
614252.5+0.014
0
1.21.515°3.871.22.15360.0122.5+0.016
+0.006
2.50
-0.025
10.51.25
81625°4.88.71.22.15360.01310.5
102140(33)31.5-19(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.063317(14)1.5
132444(36)28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.0717(14)
1631503.5+0.018
0
251936.211.1563860.153.5+0.024
+0.012
3.50
-0.030
181.75
20356342.52851548.515.3836110.244292
25427119334815.427.717312480.2933
3047802.527249018.533.321215810.3742
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.

Alterations

Ball Splines - One End Stepped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BSD2M6-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2M6G-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2M6L-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2M8-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2M8G-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2M8L-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2M10-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2M10G-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2M10L-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2M13-[100-600/1]-F[2-50/1]-P[5,​6,​8,​10]
BSD2M13G-[100-600/1]-F[2-50/1]-P[5,​6,​8,​10]
BSD2M13L-[100-600/1]-F[2-50/1]-P[5,​6,​8,​10]
BSD2M16-[110-600/1]-F[2-65/1]-P[5,​6,​8,​10,​12,​13]
BSD2M16G-[110-600/1]-F[2-65/1]-P[5,​6,​8,​10,​12,​13]
BSD2M16L-[110-600/1]-F[2-65/1]-P[5,​6,​8,​10,​12,​13]
BSD2M20-[130-700/1]-F[2-80/1]-P[8,​10,​12,​13,​15,​16]
BSD2M20G-[130-700/1]-F[2-80/1]-P[8,​10,​12,​13,​15,​16]
BSD2M20L-[130-700/1]-F[2-80/1]-P[8,​10,​12,​13,​15,​16]
BSD2M25-[150-900/1]-F[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]
BSD2M25G-[150-900/1]-F[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]
BSD2M25L-[150-900/1]-F[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]
BSD2M30-[170-1150/1]-F[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]
BSD2M30G-[170-1150/1]-F[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]
BSD2M30L-[170-1150/1]-F[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]
BSD2N6-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2N6G-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2N6L-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2N8-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2N8G-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2N8L-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2N10-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2N10G-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2N10L-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2S6-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2S6G-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2S6L-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSD2S8-[60-600/1]-F[2-30/1]-P[4,​5,​6]
BSD2S8G-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2S8L-[60-400/1]-F[2-30/1]-P[4,​5,​6]
BSD2S10-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2S10G-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2S10L-[90-600/1]-F[2-40/1]-P[4,​5,​6,​8]
BSD2S13-[100-600/1]-F[2-50/1]-P[5,​6,​8,​10]
BSD2S13G-[100-600/1]-F[2-50/1]-P[5,​6,​8,​10]
BSD2S13L-[100-600/1]-F[2-50/1]-P[5,​6,​8,​10]
BSD2S16-[110-600/1]-F[2-65/1]-P[5,​6,​8,​10,​12,​13]
BSD2S16G-[110-600/1]-F[2-65/1]-P[5,​6,​8,​10,​12,​13]
BSD2S16L-[110-600/1]-F[2-65/1]-P[5,​6,​8,​10,​12,​13]
BSD2S20-[130-700/1]-F[2-80/1]-P[8,​10,​12,​13,​15,​16]
BSD2S20G-[130-700/1]-F[2-80/1]-P[8,​10,​12,​13,​15,​16]
BSD2S20L-[130-700/1]-F[2-80/1]-P[8,​10,​12,​13,​15,​16]
BSD2S25-[150-900/1]-F[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]
BSD2S25G-[150-900/1]-F[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]
BSD2S25L-[150-900/1]-F[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]
BSD2S30-[170-1150/1]-F[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]
BSD2S30G-[170-1150/1]-F[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]
BSD2S30L-[170-1150/1]-F[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]
BSDM6-[60-400/1]-F[2-25/1]-P[3,​4,​5]
BSDM6G-[60-400/1]-F[2-9/1]-P[3,​4,​5]
BSDM6L-[60-400/1]-F[2-9/1]-P[3,​4,​5]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSNut Type Shaft Outer Dia. D
(Ø)
Nut Overall Length
(mm)
Nut O.D.
(Ø)
Shaft material Shaft Overall Length L
(mm)
Basic Load Rating: Dynamic Load
(N)
Allowable Torque
(N•m)
Nut Material Grease F
(mm)
P
(mm)
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentStandard (S2)2 ~ 253 ~ 5
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentLG22 ~ 253 ~ 5
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentET-100K2 ~ 253 ~ 5
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentStandard (S2)2 ~ 304 ~ 6
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentLG22 ~ 304 ~ 6
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentET-100K2 ~ 304 ~ 6
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent90 ~ 600380019SCM415 EquivalentStandard (S2)2 ~ 404 ~ 8
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent90 ~ 600380019SCM415 EquivalentLG22 ~ 404 ~ 8
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange10.43321SUJ2 Equivalent90 ~ 600240011SCM415 EquivalentET-100K2 ~ 404 ~ 8
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent100 ~ 600460028SCM415 EquivalentStandard (S2)2 ~ 505 ~ 10
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent100 ~ 600460028SCM415 EquivalentLG22 ~ 505 ~ 10
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange13.43624SUJ2 Equivalent100 ~ 600330020SCM415 EquivalentET-100K2 ~ 505 ~ 10
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent110 ~ 600620051SCM415 EquivalentStandard (S2)2 ~ 655 ~ 13
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent110 ~ 600620051SCM415 EquivalentLG22 ~ 655 ~ 13
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent110 ~ 600620051SCM415 EquivalentET-100K2 ~ 655 ~ 13
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent130 ~ 700850085SCM415 EquivalentStandard (S2)2 ~ 808 ~ 16
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent130 ~ 700850085SCM415 EquivalentLG22 ~ 808 ~ 16
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent130 ~ 700850085SCM415 EquivalentET-100K2 ~ 808 ~ 16
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent150 ~ 90015400193SCM415 EquivalentStandard (S2)2 ~ 1008 ~ 20
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent150 ~ 90015400193SCM415 EquivalentLG22 ~ 1008 ~ 20
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent150 ~ 90015400193SCM415 EquivalentET-100K2 ~ 1008 ~ 20
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent170 ~ 115018500272SCM415 EquivalentStandard (S2)2 ~ 12510 ~ 25
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent170 ~ 115018500272SCM415 EquivalentLG22 ~ 12510 ~ 25
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent170 ~ 115018500272SCM415 EquivalentET-100K2 ~ 12510 ~ 25
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentStandard (S2)2 ~ 253 ~ 5
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentLG22 ~ 253 ~ 5
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentET-100K2 ~ 253 ~ 5
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentStandard (S2)2 ~ 304 ~ 6
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentLG22 ~ 304 ~ 6
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentET-100K2 ~ 304 ~ 6
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent90 ~ 600380019SCM415 EquivalentStandard (S2)2 ~ 404 ~ 8
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent90 ~ 600380019SCM415 EquivalentLG22 ~ 404 ~ 8
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent90 ~ 600240011SCM415 EquivalentET-100K2 ~ 404 ~ 8
1 Piece(s) 13 Day(s) or more 10Straight62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentStandard (S2)2 ~ 253 ~ 5
1 Piece(s) 15 Day(s) or more 10Straight62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentLG22 ~ 253 ~ 5
1 Piece(s) 15 Day(s) or more 10Straight62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentET-100K2 ~ 253 ~ 5
1 Piece(s) 13 Day(s) or more 10Straight82516SUJ2 Equivalent60 ~ 60012004.8SCM415 EquivalentStandard (S2)2 ~ 304 ~ 6
1 Piece(s) 15 Day(s) or more 10Straight82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentLG22 ~ 304 ~ 6
1 Piece(s) 15 Day(s) or more 10Straight82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentET-100K2 ~ 304 ~ 6
1 Piece(s) 13 Day(s) or more 10Straight10.44021SUJ2 Equivalent90 ~ 600380019SCM415 EquivalentStandard (S2)2 ~ 404 ~ 8
1 Piece(s) 15 Day(s) or more 10Straight10.44021SUJ2 Equivalent90 ~ 600380019SCM415 EquivalentLG22 ~ 404 ~ 8
1 Piece(s) 15 Day(s) or more 10Straight10.44021SUJ2 Equivalent90 ~ 600240019SCM415 EquivalentET-100K2 ~ 404 ~ 8
1 Piece(s) 13 Day(s) or more 10Straight13.44424SUJ2 Equivalent100 ~ 600460028SCM415 EquivalentStandard (S2)2 ~ 505 ~ 10
1 Piece(s) 15 Day(s) or more 10Straight13.44424SUJ2 Equivalent100 ~ 600460028SCM415 EquivalentLG22 ~ 505 ~ 10
1 Piece(s) 15 Day(s) or more 10Straight13.43624SUJ2 Equivalent100 ~ 600330020SCM415 EquivalentET-100K2 ~ 505 ~ 10
1 Piece(s) 13 Day(s) or more 10Straight16.65031SUJ2 Equivalent110 ~ 600620051SCM415 EquivalentStandard (S2)2 ~ 655 ~ 13
1 Piece(s) 15 Day(s) or more 10Straight16.65031SUJ2 Equivalent110 ~ 600620051SCM415 EquivalentLG22 ~ 655 ~ 13
1 Piece(s) 15 Day(s) or more 10Straight16.65031SUJ2 Equivalent110 ~ 600620051SCM415 EquivalentET-100K2 ~ 655 ~ 13
1 Piece(s) 13 Day(s) or more 10Straight20.66335SUJ2 Equivalent130 ~ 700850085SCM415 EquivalentStandard (S2)2 ~ 808 ~ 16
1 Piece(s) 15 Day(s) or more 10Straight20.66335SUJ2 Equivalent130 ~ 700850085SCM415 EquivalentLG22 ~ 808 ~ 16
1 Piece(s) 15 Day(s) or more 10Straight20.66335SUJ2 Equivalent130 ~ 700850085SCM415 EquivalentET-100K2 ~ 808 ~ 16
1 Piece(s) 13 Day(s) or more 10Straight25.87142SUJ2 Equivalent150 ~ 90015400193SCM415 EquivalentStandard (S2)2 ~ 1008 ~ 20
1 Piece(s) 15 Day(s) or more 10Straight25.87142SUJ2 Equivalent150 ~ 90015400193SCM415 EquivalentLG22 ~ 1008 ~ 20
1 Piece(s) 15 Day(s) or more 10Straight25.87142SUJ2 Equivalent150 ~ 90015400193SCM415 EquivalentET-100K2 ~ 1008 ~ 20
1 Piece(s) 13 Day(s) or more 10Straight30.88047SUJ2 Equivalent170 ~ 115018500272SCM415 EquivalentStandard (S2)2 ~ 12510 ~ 25
1 Piece(s) 15 Day(s) or more 10Straight30.88047SUJ2 Equivalent170 ~ 115018500272SCM415 EquivalentLG22 ~ 12510 ~ 25
1 Piece(s) 15 Day(s) or more 10Straight30.88047SUJ2 Equivalent170 ~ 115018500272SCM415 EquivalentET-100K2 ~ 12510 ~ 25
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentStandard (S2)2 ~ 253 ~ 5
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentLG22 ~ 93 ~ 5
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentET-100K2 ~ 93 ~ 5

Loading...

More Information

 

Basic Information

Type Solid Shaft Nut Length Standard Preload Standard
Accuracy Grade Standard Grade End Shape (Left) Stepped End Shape (Right) Standard
Torque Middle Torque Ball Recirculating Type Single

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)