(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole

Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole

[Features] A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with a female screw hole on one end and a spanner groove. L size standard expanded! You can now purchase from an even more complete lineup.

One End Tapped with Cross-Drilled Hole/Wrench Flats:Related Image

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
With Wrench FlatsWith Cross-Drilled Hole
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. f8
SFJCSFUC-SFHC-SUJ2 EquivalentEffective Hardened Depth of Induction Hardening >> P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~
-
SSFJCSSFUC-SSFHC-SUS440C or 13Cr stainless
PSFJCPSFUC-PSFHC-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJCPSSFUC-PSSFHC-SUS440C or 13Cr stainless
RSFJC--RSFHC-SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSFGC-PSGHCS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSFGC--SUS304

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >>  P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >>  P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number-L-M-SC-H
SFJC10-200-M5-SC6  
SFHC20-425-M8  -H20
         

Part NumberL
1mm Increment
M (Coarse) SelectionWrench Flats DimensionsD Tol.C
TypeDSCW1g6h5f8
(With Wrench Flats)

(D Tol. g6)
SFJC
SSFJ
C
PSFJC
PSSFJC

(D Tol. f8)
PSFGC
PSSFGC

(D Tol. h5)
SFUC
SSFU
C
PSFUC
PSSFUC

620~ 8003          SC = 1mm Increment
[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]For Details of Wrench Flats, see >> P.142
58-0.004
-0.012
0
-0.005
-0.010
-0.028
0.5 or Less
820~1000345        78-0.005
-0.014
0
-0.006
-0.013
-0.035
0.5 or Less
1020~10003456       88-0.005
-0.014
0
-0.006
-0.013
-0.035
0.5 or Less
1220~1200 4568      1010-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1325~1200 4568      1110-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1525~1200 456810     1310-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1630~1200 456810     1410-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1830~1200 45681012    1610-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
2030~1200 45681012    1710-0.007
-0.020
0
-0.009
-0.020
-0.053
1.0 or Less
2535~1200 4568101216   2210-0.007
-0.020
0
-0.009
-0.020
-0.053
1.0 or Less
3035~1500   6810121620  2715-0.007
-0.020
0
-0.009
-0.020
-0.053
1.0 or Less
3535~1500    81012162024 3015-0.009
-0.025
0
-0.011
-0.025
-0.064
1.0 or Less
4050~1500     1012162024303620-0.009
-0.025
0
-0.011
-0.025
-0.064
1.0 or Less
5065~1500      12162024304120-0.009
-0.025
0
-0.011
-0.025
-0.064
1.0 or Less

Part NumberL
1mm Increment
M (Coarse) SelectionWrench Flats DimensionsD Tol.C
TypeDSCW1g6
(With Wrench Flats)

(D Tol. g6)
Low Temp. Black Chrome Plating
RSFJC
620~5003        SC = 1mm Increment
[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]For Details of Wrench Flats, see >> P.142
58-0.004
-0.012
0.5 or Less
820~500345      78-0.005
-0.014
0.5 or Less
1020~5003456     88-0.005
-0.014
0.5 or Less
1220~500 4568    1010-0.006
-0.017
0.5 or Less
1325~500 4568    1110-0.006
-0.017
0.5 or Less
1525~500 456810   1310-0.006
-0.017
0.5 or Less
1630~500 456810   1410-0.006
-0.017
0.5 or Less
1830~500 45681012  1610-0.006
-0.017
0.5 or Less
2030~500 45681012  1710-0.007
-0.020
1.0 or Less
2535~500 4568101216 2210-0.007
-0.020
1.0 or Less
3035~500   68101216202715-0.007
-0.020
1.0 or Less

Part NumberL
1mm Increment
M (Coarse) SelectionCross-Drilled Hole DimensionsD Tol.C
TypeDHdg6f8
(With Cross-Drilled Hole)

(D Tol. g6)
SFHC
SSFHC
P
SFHC
PSSFHC
RSFHC

(D Tol. f8)
PSGHC


[ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.
820~ 800345      H=1mm Increment
[ ! ]L≥H+d/2+2
[ ! ]H≥Mx2.5+d/2+6
3-0.005
-0.014
-0.013
-0.035
0.5 or Less
1020~ 8003456     3-0.005
-0.014
-0.013
-0.035
0.5 or Less
1220~1000 4568    3-0.006
-0.017
-0.016
-0.043
0.5 or Less
1325~1000 4568    4-0.006
-0.017
-0.016
-0.043
0.5 or Less
1525~1000 456810   4-0.006
-0.017
-0.016
-0.043
0.5 or Less
1630~1200 456810   4-0.006
-0.017
-0.016
-0.043
0.5 or Less
1830~1200 45681012  6-0.006
-0.017
-0.016
-0.043
0.5 or Less
2030~1200 45681012  6-0.007
-0.020
-0.020
-0.053
1.0 or Less
2535~1200 4568101216 7-0.007
-0.020
-0.020
-0.053
1.0 or Less
3035~1500   68101216207-0.007
-0.020
-0.020
-0.053
1.0 or Less
[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Alterations

One End Tapped with Cross-Drilled Hole/Wrench Flats:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFGC6-[20-600/1]-M3-SC[0-592/1]
PSFGC8-[20-800/1]-M[3,​4,​5]-SC[0-792/1]
PSFGC10-[20-800/1]-M[3,​4,​5,​6]-SC[0-792/1]
PSFGC10-[20-800/1]-MD6-SC[0-792/1]
PSFGC12-[20-1000/1]-M[4,​5,​6,​8]-SC[0-990/1]
PSFGC12-[20-1000/1]-MD[6,​8]-SC[0-990/1]
PSFGC12-[20-1000/1]-MSC8-SC[0-990/1]
PSFGC13-[25-1000/1]-M[4,​5,​6,​8]-SC[0-990/1]
PSFGC13-[25-1000/1]-MD[6,​8]-SC[0-990/1]
PSFGC13-[25-1000/1]-MSC8-SC[0-990/1]
PSFGC15-[25-1000/1]-M[4,​5,​6,​8,​10]-SC[0-990/1]
PSFGC15-[25-1000/1]-MD[6,​8,​10]-SC[0-990/1]
PSFGC15-[25-1000/1]-MSC[8,​10]-SC[0-990/1]
PSFGC16-[30-1200/1]-M[4,​5,​6,​8,​10]-SC[0-1190/1]
PSFGC16-[30-1200/1]-MD[6,​8,​10]-SC[0-1190/1]
PSFGC16-[30-1200/1]-MSC[8,​10]-SC[0-1190/1]
PSFGC18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
PSFGC18-[30-1200/1]-MD[6,​8,​10,​12]-SC[0-1190/1]
PSFGC18-[30-1200/1]-MSC[8,​10,​12]-SC[0-1190/1]
PSFGC20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-SC[0-1190/1]
PSFGC20-[30-1200/1]-MD[6,​8,​10,​12]-SC[0-1190/1]
PSFGC20-[30-1200/1]-MSC[8,​10,​12,​14]-SC[0-1190/1]
PSFGC25-[35-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGC25-[35-1200/1]-MD[6,​8,​10,​12,​16]-SC[0-1190/1]
PSFGC25-[35-1200/1]-MSC[8,​10,​12,​14,​18]-SC[0-1190/1]
PSFGC30-[35-1500/1]-M[6,​8,​10,​12,​16,​20]-SC[0-1485/1]
PSFGC30-[35-1500/1]-MD[6,​8,​10,​12,​16,​20]-SC[0-1485/1]
PSFGC30-[35-1500/1]-MSC[8,​10,​12,​14,​18]-SC[0-1485/1]
PSFGC35-[35-1500/1]-M[8,​10,​12,​16,​20,​24]-SC[0-1485/1]
PSFGC35-[35-1500/1]-MSC[8,​10,​12,​14,​18]-SC[0-1485/1]
PSFGC40-[50-1500/1]-M[10,​12,​16,​20,​24,​30]-SC[0-1480/1]
PSFGC40-[50-1500/1]-MSC[10,​12,​14,​18]-SC[0-1480/1]
PSFGC50-[65-1500/1]-M[12,​16,​20,​24,​30]-SC[0-1480/1]
PSFGC50-[65-1500/1]-MSC[12,​14,​18]-SC[0-1480/1]
PSFHC8-[20-500/1]-M[3,​4,​5]-H[0-496/1]
PSFHC10-[20-500/1]-M[3,​4,​5,​6]-H[0-496/1]
PSFHC10-[20-500/1]-MD6-H[0-496/1]
PSFHC12-[20-500/1]-M[4,​5,​6,​8]-H[0-496/1]
PSFHC12-[20-500/1]-MD[6,​8]-H[0-496/1]
PSFHC12-[20-500/1]-MSC8-H[0-496/1]
PSFHC13-[25-500/1]-M[4,​5,​6,​8]-H[0-496/1]
PSFHC13-[25-500/1]-MD[6,​8]-H[0-496/1]
PSFHC13-[25-500/1]-MSC8-H[0-496/1]
PSFHC15-[25-500/1]-M[4,​5,​6,​8,​10]-H[0-496/1]
PSFHC15-[25-500/1]-MD[6,​8,​10]-H[0-496/1]
PSFHC15-[25-500/1]-MSC[8,​10]-H[0-496/1]
PSFHC16-[30-500/1]-M[4,​5,​6,​8,​10]-H[0-496/1]
PSFHC16-[30-500/1]-MD[6,​8,​10]-H[0-496/1]
PSFHC16-[30-500/1]-MSC[8,​10]-H[0-496/1]
PSFHC18-[30-500/1]-M[4,​5,​6,​8,​10,​12]-H[0-495/1]
PSFHC18-[30-500/1]-MD[6,​8,​10,​12]-H[0-495/1]
PSFHC18-[30-500/1]-MSC[8,​10,​12]-H[0-495/1]
PSFHC20-[30-500/1]-M[4,​5,​6,​8,​10,​12]-H[0-495/1]
PSFHC20-[30-500/1]-MD[6,​8,​10,​12]-H[0-495/1]
PSFHC20-[30-500/1]-MSC[8,​10,​12,​14]-H[0-495/1]
PSFHC25-[35-500/1]-M[4,​5,​6,​8,​10,​12,​16]-H[0-494/1]
PSFHC25-[35-500/1]-MD[6,​8,​10,​12,​16]-H[0-494/1]
PSFHC25-[35-500/1]-MSC[8,​10,​12,​14,​18]-H[0-494/1]
PSFHC30-[35-500/1]-M[6,​8,​10,​12,​16,​20]-H[0-494/1]
PSFHC30-[35-500/1]-MD[6,​8,​10,​12,​16,​20]-H[0-494/1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC]
(mm)
Change Tapped Thread M to Fine One [MSC]
(mm)
H
(mm)
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M]
(mm)
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD]
(mm)
1 Piece(s) 4 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating620 ~ 600f8No Induction Hardening0 ~ 592--3-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating820 ~ 800f8No Induction Hardening0 ~ 792--3 ~ 5-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1020 ~ 800f8No Induction Hardening0 ~ 792--3 ~ 6-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1020 ~ 800f8No Induction Hardening0 ~ 792---6
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1220 ~ 1000f8No Induction Hardening0 ~ 990--4 ~ 8-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1220 ~ 1000f8No Induction Hardening0 ~ 990---6 ~ 8
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1220 ~ 1000f8No Induction Hardening0 ~ 9908---
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 1000f8No Induction Hardening0 ~ 990--4 ~ 8-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 1000f8No Induction Hardening0 ~ 990---6 ~ 8
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 1000f8No Induction Hardening0 ~ 9908---
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 1000f8No Induction Hardening0 ~ 990--4 ~ 10-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 1000f8No Induction Hardening0 ~ 990---6 ~ 10
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 1000f8No Induction Hardening0 ~ 9908 ~ 10---
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1630 ~ 1200f8No Induction Hardening0 ~ 1190--4 ~ 10-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1630 ~ 1200f8No Induction Hardening0 ~ 1190---6 ~ 10
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1630 ~ 1200f8No Induction Hardening0 ~ 11908 ~ 10---
1 Piece(s) 9 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1830 ~ 1200f8No Induction Hardening0 ~ 1190--4 ~ 12-
1 Piece(s) 9 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1830 ~ 1200f8No Induction Hardening0 ~ 1190---6 ~ 12
1 Piece(s) 9 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1830 ~ 1200f8No Induction Hardening0 ~ 11908 ~ 12---
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2030 ~ 1200f8No Induction Hardening0 ~ 1190--4 ~ 12-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2030 ~ 1200f8No Induction Hardening0 ~ 1190---6 ~ 12
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2030 ~ 1200f8No Induction Hardening0 ~ 11908 ~ 14---
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2535 ~ 1200f8No Induction Hardening0 ~ 1190--4 ~ 16-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2535 ~ 1200f8No Induction Hardening0 ~ 1190---6 ~ 16
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2535 ~ 1200f8No Induction Hardening0 ~ 11908 ~ 18---
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating3035 ~ 1500f8No Induction Hardening0 ~ 1485--6 ~ 20-
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating3035 ~ 1500f8No Induction Hardening0 ~ 1485---6 ~ 20
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating3035 ~ 1500f8No Induction Hardening0 ~ 14858 ~ 18---
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating3535 ~ 1500f8No Induction Hardening0 ~ 1485--8 ~ 24-
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating3535 ~ 1500f8No Induction Hardening0 ~ 14858 ~ 18---
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating4050 ~ 1500f8No Induction Hardening0 ~ 1480--10 ~ 30-
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating4050 ~ 1500f8No Induction Hardening0 ~ 148010 ~ 18---
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating5065 ~ 1500f8No Induction Hardening0 ~ 1480--12 ~ 30-
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating5065 ~ 1500f8No Induction Hardening0 ~ 148012 ~ 18---
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating820 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4963 ~ 5-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1020 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4963 ~ 6-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1020 ~ 500g6Induction Hardened (58HRC~)--0 ~ 496-6
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1220 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4964 ~ 8-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1220 ~ 500g6Induction Hardened (58HRC~)--0 ~ 496-6 ~ 8
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1220 ~ 500g6Induction Hardened (58HRC~)-80 ~ 496--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4964 ~ 8-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)--0 ~ 496-6 ~ 8
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 500g6Induction Hardened (58HRC~)-80 ~ 496--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4964 ~ 10-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)--0 ~ 496-6 ~ 10
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 500g6Induction Hardened (58HRC~)-8 ~ 100 ~ 496--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1630 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4964 ~ 10-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1630 ~ 500g6Induction Hardened (58HRC~)--0 ~ 496-6 ~ 10
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1630 ~ 500g6Induction Hardened (58HRC~)-8 ~ 100 ~ 496--
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1830 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4954 ~ 12-
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1830 ~ 500g6Induction Hardened (58HRC~)--0 ~ 495-6 ~ 12
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1830 ~ 500g6Induction Hardened (58HRC~)-8 ~ 120 ~ 495--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2030 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4954 ~ 12-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2030 ~ 500g6Induction Hardened (58HRC~)--0 ~ 495-6 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2030 ~ 500g6Induction Hardened (58HRC~)-8 ~ 140 ~ 495--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2535 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4944 ~ 16-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2535 ~ 500g6Induction Hardened (58HRC~)--0 ~ 494-6 ~ 16
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2535 ~ 500g6Induction Hardened (58HRC~)-8 ~ 180 ~ 494--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3035 ~ 500g6Induction Hardened (58HRC~)--0 ~ 4946 ~ 20-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3035 ~ 500g6Induction Hardened (58HRC~)--0 ~ 494-6 ~ 20

Loading...

Example

One End Tapped with Cross-Drilled Hole/Wrench Flats:Related Image
 

Basic Information

Basic Shape Solid End Shape (Left) Tapped End Shape (Right) No Machining
Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)