(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
With Wrench FlatsWith Cross-Drilled Hole
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. f8
SAFUSFFU-SFHAM-SUJ2 EquivalentEffective Hardened Depth of Induction Hardening >>P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~
-
SSAFUSSFFU-SSHAM-SUS440C or 13Cr stainless
PSAFUPSFFU-PSHAM-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSAFUPSSFFU-PSSHAM-SUS440C or 13Cr stainless
RSAFU--RSHAM-SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSAGU-PSHGMS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSAGU--SUS304

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number-L-F-M-T-N-SC-H
SAFU15
SFHAM15
-
-
300
300
-
-
F18
F18
-
-
M6
M6
-
-
T17
T17
-
-
N12
N12
-

SC8


-

H8

Part Number1mm IncrementsSelectionWrench Flats DimensionsD Tol.(Y)Max.C
TypeDLF, TM, N (Coarse)SCW1g6h5f8
 825~ 990





5≤F≤Mx3
5≤T≤Nx3





[ ! ]F-(g)≥Pitchx3
[ ! ]T-(g)≥Pitchx3
6       SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]Details of Wrench Flats
>> P.142
78-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.5 or Less
(With Wrench Flats)

(D Tol. g6)
SAFU
SSAFU

PSAFU
PSSAFU


(D Tol. f8)
PSAGU
PSSAGU


(D Tol. h5) SFFU
SSFFU
PSFFU
PSSFFU
1025~ 99068      88-0.005
-0.014
0
-0.006
-0.013
-0.035
8000.5 or Less
1225~11906810     1010-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1325~1190681012    1110-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1525~1190681012    1310-0.006
-0.017
0
-0.008
-0.016
-0.043
10000.5 or Less
1625~1190681012    1410-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.5 or Less
1825~119068101216   1610-0.006
-0.017
0
-0.008
-0.016
-0.043
12000.5 or Less
2025~119068101216   1710-0.007
-0.020
0
-0.009
-0.020
-0.053
12001.0 or Less
2525~1190 81012162024 2210-0.007
-0.020
0
-0.009
-0.020
-0.053
12001.0 or Less
3025~1490 81012162024 2715-0.007
-0.020
0
-0.009
-0.020
-0.053
15001.0 or Less
3525~1490  1012162024303015-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less
4025~1490   12162024303620-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less
5025~1490    162024304120-0.009
-0.025
0
-0.011
-0.025
-0.064
15001.0 or Less

Part Number1mm IncrementsSelectionWrench Flats DimensionsD Tol.(Y)Max.C
TypeDLF, TM, N (Coarse)SCW1g6
 825~500



5≤F≤Mx3
5≤T≤Nx3



[ ! ]F-(g)≥Pitchx3
[ ! ]T-(g)≥Pitchx3
6      SC = 1mm Increment

[ ! ]SC+1≤L
[ ! ]SC≥0
[ ! ]Details of Wrench Flats
>> P.142
78-0.005
-0.014
8000.5 or Less
(With Wrench Flats)

(D Tol. g6)
Low Temp. Black Chrome Plating
RSAFU
(Ymax≤800)
1025~50068     88-0.005
-0.014
8000.5 or Less
1225~5006810    1010-0.006
-0.017
10000.5 or Less
1325~500681012   1110-0.006
-0.017
10000.5 or Less
1525~500681012   1310-0.006
-0.017
10000.5 or Less
1625~500681012   1410-0.006
-0.017
12000.5 or Less
1825~50068101216  1610-0.006
-0.017
12000.5 or Less
2025~50068101216  1710-0.007
-0.020
12001.0 or Less
2525~500 810121620242210-0.007
-0.020
12001.0 or Less
3025~500 810121620242715-0.007
-0.020
15001.0 or Less

Part Number1mm IncrementsSelectionCross-Drilled Hole DimensionsD Tol.(Y)Max.C
TypeDLF, TM, N (Coarse)Hdg6f8
(With Cross-Drilled Hole)
(D Tol. g6)
SFHAM
SSHAM
P
SHAM
PSSHAM
RSHAM

(D Tol. f8)
PSHGM
[ ! ]D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.
1025~500





5≤F≤Mx3
5≤T≤Nx3





[ ! ]F-(g)≥Pitchx3
[ ! ]T-(g)≥Pitchx3
68     H=1mm Increment

[ ! ]L≥H+d/2+2
[ ! ]H≥d/2+2
3-0.005
-0.014
-0.013
-0.035
8000.5 or Less
1225~5006810    3-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1325~500681012   4-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1525~500681012   4-0.006
-0.017
-0.016
-0.043
10000.5 or Less
1625~500681012   4-0.006
-0.017
-0.016
-0.043
12000.5 or Less
1825~50068101216  6-0.006
-0.017
-0.016
-0.043
12000.5 or Less
2025~50068101216  6-0.007
-0.020
-0.020
-0.053
12001.0 or Less
2525~500 810121620247-0.007
-0.020
-0.020
-0.053
12001.0 or Less
3025~500 810121620247-0.007
-0.020
-0.020
-0.053
15001.0 or Less

Coarse Thread Undercut Dimensions
M
N
PitchMC
NC
(g)
61.04.42
81.256.03
101.57.73
121.759.44
162.013.04
202.516.45
243.019.65
303.525.05

Alterations

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6-SC[0-782/1]
PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-SC[0-782/1]
PSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-SC[0-782/1]
PSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-M[6,​8]-T[5-24/1]-N[6,​8]-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-M[6,​8]-T[5-24/1]-NMC[6,​8]-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-MMC[6,​8]-T[5-24/1]-N[6,​8]-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-MMC[6,​8]-T[5-24/1]-NMC[6,​8]-SC[0-782/1]
PSAFU12-[25-990/1]-F[5-30/1]-M[6,​8,​10]-T[5-30/1]-N[6,​8,​10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-M[6,​8,​10]-T[5-30/1]-NMC[6,​8,​10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-M[6,​8,​10]-T[5-30/1]-NMS10-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,​8,​10]-T[5-30/1]-N[6,​8,​10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,​8,​10]-T[5-30/1]-NMC[6,​8,​10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,​8,​10]-T[5-30/1]-NMS10-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,​8,​10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,​8,​10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-NMS10-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-NMS10-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-N[6,​8,​10,​12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMS10-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-NMS[10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-NMS[10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMS[10,​12]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMS[10,​12]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMS[10,​12]-T[5-36/1]-NMS[10,​12]-SC[0-980/1]
PSAFU16-[25-1190/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-M[6,​8,​10,​12]-T[5-36/1]-NMS[10,​12,​14]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,​8,​10,​12]-T[5-36/1]-NMS[10,​12,​14]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,​12,​14]-T[5-36/1]-N[6,​8,​10,​12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,​12,​14]-T[5-36/1]-NMC[6,​8,​10,​12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,​12,​14]-T[5-36/1]-NMS[10,​12,​14]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-NMC[6,​8,​10,​12,​15]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-NMS[10,​12,​14]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15]-T[5-48/1]-NMC[6,​8,​10,​12,​15]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15]-T[5-48/1]-NMS[10,​12,​14]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMS[10,​12,​14]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMS[10,​12,​14]-T[5-48/1]-NMC[6,​8,​10,​12,​15]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMS[10,​12,​14]-T[5-48/1]-NMS[10,​12,​14]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-NMC[6,​8,​10,​12,​15,​17]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-M[6,​8,​10,​12,​16]-T[5-48/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-T[5-48/1]-NMC[6,​8,​10,​12,​15,​17]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-T[5-48/1]-NMS[10,​12,​14,​18]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMS[10,​12,​14,​18]-T[5-48/1]-N[6,​8,​10,​12,​16]-SC[0-1180/1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC]
(mm)
Change Thread M to Fine One [MMC]
(mm)
Change Thread M to Fine One [MMS]
(mm)
Change Thread N to Fine One [NMC]
(mm)
Change Thread N to Fine One [NMS]
(mm)
F
(mm)
H
(mm)
T
(mm)
Threaded (Coarse) [M]
(mm)
Threaded (Coarse) [N]
(mm)
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 790g6Induction Hardened (58HRC~)0 ~ 782----5 ~ 18-5 ~ 1866
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 790g6Induction Hardened (58HRC~)0 ~ 782--6-5 ~ 18-5 ~ 186-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 790g6Induction Hardened (58HRC~)0 ~ 7826---5 ~ 18-5 ~ 18-6
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 790g6Induction Hardened (58HRC~)0 ~ 7826-6-5 ~ 18-5 ~ 18--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 790g6Induction Hardened (58HRC~)0 ~ 782----5 ~ 24-5 ~ 246 ~ 86 ~ 8
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 790g6Induction Hardened (58HRC~)0 ~ 782--6 ~ 8-5 ~ 24-5 ~ 246 ~ 8-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 790g6Induction Hardened (58HRC~)0 ~ 7826 ~ 8---5 ~ 24-5 ~ 24-6 ~ 8
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 790g6Induction Hardened (58HRC~)0 ~ 7826 ~ 8-6 ~ 8-5 ~ 24-5 ~ 24--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 980----5 ~ 30-5 ~ 306 ~ 106 ~ 10
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 980--6 ~ 10-5 ~ 30-5 ~ 306 ~ 10-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 980---105 ~ 30-5 ~ 306 ~ 10-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 10---5 ~ 30-5 ~ 30-6 ~ 10
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 10-6 ~ 10-5 ~ 30-5 ~ 30--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 10--105 ~ 30-5 ~ 30--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-10--5 ~ 30-5 ~ 30-6 ~ 10
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-106 ~ 10-5 ~ 30-5 ~ 30--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-10-105 ~ 30-5 ~ 30--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 980----5 ~ 36-5 ~ 366 ~ 126 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 980--6 ~ 12-5 ~ 36-5 ~ 366 ~ 12-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 980---105 ~ 36-5 ~ 366 ~ 12-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 12---5 ~ 36-5 ~ 36-6 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 12-6 ~ 12-5 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 12--105 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-10--5 ~ 36-5 ~ 36-6 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-106 ~ 12-5 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-10-105 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 980----5 ~ 36-5 ~ 366 ~ 126 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 980--6 ~ 12-5 ~ 36-5 ~ 366 ~ 12-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 980---10 ~ 125 ~ 36-5 ~ 366 ~ 12-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 12---5 ~ 36-5 ~ 36-6 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 12-6 ~ 12-5 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 9806 ~ 12--10 ~ 125 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-10 ~ 12--5 ~ 36-5 ~ 36-6 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-10 ~ 126 ~ 12-5 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 990g6Induction Hardened (58HRC~)0 ~ 980-10 ~ 12-10 ~ 125 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180----5 ~ 36-5 ~ 366 ~ 126 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180--6 ~ 12-5 ~ 36-5 ~ 366 ~ 12-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180---10 ~ 145 ~ 36-5 ~ 366 ~ 12-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 12---5 ~ 36-5 ~ 36-6 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 12-6 ~ 12-5 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 12--10 ~ 145 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180-10 ~ 14--5 ~ 36-5 ~ 36-6 ~ 12
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180-10 ~ 146 ~ 12-5 ~ 36-5 ~ 36--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180-10 ~ 14-10 ~ 145 ~ 36-5 ~ 36--
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180----5 ~ 48-5 ~ 486 ~ 166 ~ 16
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180--6 ~ 15-5 ~ 48-5 ~ 486 ~ 16-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180---10 ~ 145 ~ 48-5 ~ 486 ~ 16-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 15---5 ~ 48-5 ~ 48-6 ~ 16
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 15-6 ~ 15-5 ~ 48-5 ~ 48--
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 15--10 ~ 145 ~ 48-5 ~ 48--
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180-10 ~ 14--5 ~ 48-5 ~ 48-6 ~ 16
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180-10 ~ 146 ~ 15-5 ~ 48-5 ~ 48--
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180-10 ~ 14-10 ~ 145 ~ 48-5 ~ 48--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180----5 ~ 48-5 ~ 486 ~ 166 ~ 16
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180--6 ~ 17-5 ~ 48-5 ~ 486 ~ 16-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180---10 ~ 185 ~ 48-5 ~ 486 ~ 16-
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 17---5 ~ 48-5 ~ 48-6 ~ 16
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 17-6 ~ 17-5 ~ 48-5 ~ 48--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1190g6Induction Hardened (58HRC~)0 ~ 11806 ~ 17--10 ~ 185 ~ 48-5 ~ 48--
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1190g6Induction Hardened (58HRC~)0 ~ 1180-10 ~ 18--5 ~ 48-5 ~ 48-6 ~ 16

Loading...

Example

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image
 

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) Threaded
Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)