(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts - Set Screw Grooved

Linear Shafts - Set Screw Grooved

[Features] Linear shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with grooves for set screws.

Ends Grooved/Threaded/Tapped/Stepped:Related Image
[ ! ]Annealing could reduce hardness at set screw grooved shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Circularity, Straightness, Perpendicularity, Concentricity, Changes in Hardness >> P.111
[ ! ]Features of Low Temp. Black Chrome Plating >> P.128

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
Solid, Both Ends GroovedSolid, One End GroovedOne End TappedOne End ThreadedOne End Threaded with O.D. same as Shaft O.D.
SFJQSFJSSFTSSFNSSFQSSUJ2 EquivalentEffective Hardened Depth of Induction Hardened >>P.112
SUJ2 Equivalent
58HRC~
SUS440C or 13Cr stainless
56HRC~
-
SSFJQSSFJSSSFTSSSFNSSSFQSSUS440C or 13Cr stainless
PSFJQPSFJSPSFTSPSFNSPSFQSSUJ2 EquivalentHard Chrome Plating
Plating Hardness: HV750 ~
Plating Thickness: 5µ or More
PSSFJQPSSFJSPSSFTSPSSFNSPSSFQSSUS440C or 13Cr stainless

Specifications

Part Number-L-M-F-B-P-V-K-G-Q
SFJQ16-100        -V10-K5-G10-Q5
SSFTS20-500-M10          -G10-Q7
PSFNS8-650  -F10-B8-P4    -G20-Q4
Part NumberL
1mm Increment
Slot DimensionD Tol.C
TypeDV, G (0.1mm Increment)K, QD1g6
Solid, Both Ends Grooved
SFJQ
SSFJQ
PSFJQ
PSSFJQ
620~6005~184   5-0.004
-0.012
0.5 or Less
820~8005~2445  7-0.005
-0.014
0.5 or Less
1020~8005~3045  9-0.005
-0.014
0.5 or Less
1220~10005~36 5  10-0.006
-0.017
0.5 or Less
1325~10005~39 5  11-0.006
-0.017
0.5 or Less
1525~10005~45 56 13-0.006
-0.017
0.5 or Less
1630~12005~48 56 14-0.006
-0.017
0.5 or Less
1830~12005~54 56 16-0.006
-0.017
0.5 or Less
2030~12006~60  6718-0.007
-0.020
1.0 or Less
2535~12006~75  6723-0.007
-0.020
1.0 or Less
3035~15006~90   728-0.007
-0.020
1.0 or Less

Part NumberL
1mm Increment
Slot DimensionD Tol.C
TypeDG (0.1mm Increment)QD1g6
Solid, One End Grooved
SFJS
SSFJS
PSFJS
PSSFJS
620~6005~184   5-0.004
-0.012
0.5 or Less
820~8005~2445  7-0.005
-0.014
0.5 or Less
1020~8005~3045  9-0.005
-0.014
0.5 or Less
1220~10005~36 5  10-0.006
-0.017
0.5 or Less
1325~10005~39 5  11-0.006
-0.017
0.5 or Less
1525~10005~45 56 13-0.006
-0.017
0.5 or Less
1630~12005~48 56 14-0.006
-0.017
0.5 or Less
1830~12005~54 56 16-0.006
-0.017
0.5 or Less
2030~12006~60  6718-0.007
-0.020
1.0 or Less
2535~12006~75  6723-0.007
-0.020
1.0 or Less
3035~15006~90   728-0.007
-0.020
1.0 or Less

Part NumberL
1mm Increment
One End TappedSlot DimensionD Tol.C
TypeDM (Coarse Thread)G (0.1mm Increment)QD1g6
One End Tapped Type
SFTS
SSFTS
PSFTS
PSSFTS
620~6003         5~184   5-0.004
-0.012
0.5 or Less
820~800345       5~2445  7-0.005
-0.014
0.5 or Less
1020~8003456      5~3045  9-0.005
-0.014
0.5 or Less
1220~1000 4568     5~36 5  10-0.006
-0.017
0.5 or Less
1325~1000 4568     5~39 5  11-0.006
-0.017
0.5 or Less
1525~1000 456810    5~45 56 13-0.006
-0.017
0.5 or Less
1630~1200 456810    5~48 56 14-0.006
-0.017
0.5 or Less
1830~1200 45681012   5~54 56 16-0.006
-0.017
0.5 or Less
2030~1200 45681012   6~60  6718-0.007
-0.020
1.0 or Less
2535~1200 4568101216  6~75  6723-0.007
-0.020
1.0 or Less
3035~1500   6810121620246~90   728-0.007
-0.020
1.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required. [ ! ]For One End Tapped Type, G≤L-Mx2-Qx2 is required.
[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Part Number1mm IncrementSelectionSlot DimensionD Tol.(Y)Max.RC
TypeDLFBPG (1mm Increment)Q (Selection)D1g6
Threaded Type
SFNS
SSFNS
PSFNS
PSSFNS
625~5982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(When P≥12)
B≤F-5

[ ! ]B≥Pitchx3
3456       5~184   5-0.004
-0.012
6000.3 or Less0.5 or Less
825~79834568      5~2445  7-0.005
-0.014
8000.3 or Less0.5 or Less
1025~798 456810     5~3045  9-0.005
-0.014
8000.3 or Less0.5 or Less
1225~998  5681012    5~36 5  11-0.006
-0.017
10000.3 or Less0.5 or Less
1325~998  5681012    5~39 5  11-0.006
-0.017
10000.3 or Less0.5 or Less
1525~998  5681012    5~45 56 13-0.006
-0.017
10000.3 or Less0.5 or Less
1625~1198  568101216   5~48 56 14-0.006
-0.017
12000.3 or Less0.5 or Less
1825~1198  568101216   5~54 56 16-0.006
-0.017
12000.3 or Less0.5 or Less
2025~1198   6810121620  6~60  6718-0.007
-0.020
12000.3 or Less1.0 or Less
2525~1198    81012162024 6~75  6723-0.007
-0.020
12000.3 or Less1.0 or Less
3025~1498    81012162024306~90   728-0.007
-0.020
15000.3 or Less1.0 or Less

Part Number1mm IncrementSlot DimensionD Tol.(Y)Max.C
TypeDLBG (1mm Increment)Q (Selection)D1g6
One End Threaded with O.D. same as Shaft O.D.
SFQS
SSFQS
PSFQS
PSSFQS
625~598Pitchx3≤B≤Mx5


[ ! ]For One End Threaded with O.D. same as Shaft O.D., L dimensions have priority, thus the effective thread length will be B-(Pitchx2).
5~184   5-0.004
-0.012
6000.5 or Less
825~7985~2445  7-0.005
-0.014
8000.5 or Less
1025~7985~3045  9-0.005
-0.014
8000.5 or Less
1225~9985~36 5  11-0.006
-0.017
10000.5 or Less
1625~11985~48 56 14-0.006
-0.017
12000.5 or Less
2025~11986~60  6718-0.007
-0.020
12001.0 or Less
3025~14986~90   728-0.007
-0.020
15001.0 or Less
[ ! ]V+K/2+1≤L/2 or G+Q/2+1≤L/2 is required.

Coarse Thread Dimension
MPitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Alterations

Ends Grooved/Threaded/Tapped/Stepped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
PSFJQ8-[20-800/1]-V[5-24/1]-K[4,​5]-G[5-24/1]-Q[4,​5]
PSFJQ10-[20-800/1]-V[5-30/1]-K[4,​5]-G[5-30/1]-Q[4,​5]
PSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
PSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
PSFJQ15-[25-1000/1]-V[5-45/1]-K[5,​6]-G[5-45/1]-Q[5,​6]
PSFJQ16-[30-1200/1]-V[5-48/1]-K[5,​6]-G[5-48/1]-Q[5,​6]
PSFJQ18-[30-1200/1]-V[5-54/1]-K[5,​6]-G[5-54/1]-Q[5,​6]
PSFJQ20-[30-1200/1]-V[6-60/1]-K[6,​7]-G[6-60/1]-Q[6,​7]
PSFJQ25-[30-1200/1]-V[6-75/1]-K[6,​7]-G[6-75/1]-Q[6,​7]
PSFJQ30-[35-1500/1]-V[6-90/1]-K7-G[6-90/1]-Q7
PSFJS6-[20-600/1]-G[5-18/1]-Q4
PSFJS8-[20-800/1]-G[5-24/1]-Q[4,​5]
PSFJS10-[20-800/1]-G[5-30/1]-Q[4,​5]
PSFJS12-[20-1000/1]-G[5-36/1]-Q5
PSFJS13-[25-1000/1]-G[5-39/1]-Q5
PSFJS15-[25-1000/1]-G[5-45/1]-Q[5,​6]
PSFJS16-[30-1200/1]-G[5-48/1]-Q[5,​6]
PSFJS18-[30-1200/1]-G[5-54/1]-Q[5,​6]
PSFJS20-[30-1200/1]-G[6-60/1]-Q[6,​7]
PSFJS25-[30-1200/1]-G[6-75/1]-Q[6,​7]
PSFJS30-[35-1500/1]-G[6-90/1]-Q7
PSFNS6-[20-600/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6]-G[5-18/1]-Q4
PSFNS8-[20-800/1]-F[2-40/1]-B[2-37/1]-P[3,​4,​5,​6,​8]-G[5-24/1]-Q[4,​5]
PSFNS10-[20-800/1]-F[2-50/1]-B[2-47/1]-P[4,​5,​6,​8,​10]-G[5-30/1]-Q[4,​5]
PSFNS12-[20-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-36/1]-Q5
PSFNS13-[25-1000/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-39/1]-Q5
PSFNS15-[25-998/1]-F[2-60/1]-B[2-55/1]-P[5,​6,​8,​10,​12]-G[5-45/1]-Q[5,​6]
PSFNS16-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-48/1]-Q[5,​6]
PSFNS18-[30-1200/1]-F[2-80/1]-B[2-75/1]-P[5,​6,​8,​10,​12,​16]-G[5-54/1]-Q[5,​6]
PSFNS20-[30-1200/1]-F[2-100/1]-B[2-95/1]-P[6,​8,​10,​12,​16,​20]-G[6-60/1]-Q[6,​7]
PSFNS25-[30-1200/1]-F[2-120/1]-B[2-115/1]-P[8,​10,​12,​16,​20,​24]-G[6-75/1]-Q[6,​7]
PSFNS30-[35-1500/1]-F[2-150/1]-B[2-145/1]-P[8,​10,​12,​16,​20,​24,​30]-G[6-90/1]-Q7
PSFQS6-[20-600/1]-B[2-28/1]-G[5-18/1]-Q4
PSFQS8-[20-800/1]-B[2-37/1]-G[5-24/1]-Q[4,​5]
PSFQS10-[20-800/1]-B[2-47/1]-G[5-30/1]-Q[4,​5]
PSFQS12-[20-1000/1]-B[2-55/1]-G[5-36/1]-Q5
PSFQS16-[30-1200/1]-B[2-75/1]-G[5-48/1]-Q[5,​6]
PSFQS20-[30-1200/1]-B[2-95/1]-G[6-60/1]-Q[6,​7]
PSFQS30-[35-1500/1]-B[2-145/1]-G[6-90/1]-Q7
PSFTS6-[20-600/1]-M3-G[5-18/1]-Q4
PSFTS8-[20-800/1]-M[3,​4,​5]-G[5-24/1]-Q[4,​5]
PSFTS10-[20-800/1]-M[3,​4,​5,​6]-G[5-30/1]-Q[4,​5]
PSFTS12-[20-1000/1]-M[4,​5,​6,​8]-G[5-36/1]-Q5
PSFTS13-[25-1000/1]-M[4,​5,​6,​8]-G[5-39/1]-Q5
PSFTS15-[25-1000/1]-M[4,​5,​6,​8,​10]-G[5-45/1]-Q[5,​6]
PSFTS16-[30-1200/1]-M[4,​5,​6,​8,​10]-G[5-48/1]-Q[5,​6]
PSFTS18-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[5-54/1]-Q[5,​6]
PSFTS20-[30-1200/1]-M[4,​5,​6,​8,​10,​12]-G[6-60/1]-Q[6,​7]
PSFTS25-[30-1200/1]-M[4,​5,​6,​8,​10,​12,​16]-G[6-75/1]-Q[6,​7]
PSFTS30-[35-1500/1]-M[6,​8,​10,​12,​16,​20,​24]-G[6-90/1]-Q7
PSSFJQ6-[20-600/1]-V[5-18/1]-K4-G[5-18/1]-Q4
PSSFJQ8-[20-800/1]-V[5-24/1]-K[4,​5]-G[5-24/1]-Q[4,​5]
PSSFJQ10-[20-800/1]-V[5-30/1]-K[4,​5]-G[5-30/1]-Q[4,​5]
PSSFJQ12-[20-1000/1]-V[5-36/1]-K5-G[5-36/1]-Q5
PSSFJQ13-[25-1000/1]-V[5-39/1]-K5-G[5-39/1]-Q5
PSSFJQ15-[25-1000/1]-V[5-45/1]-K[5,​6]-G[5-45/1]-Q[5,​6]
PSSFJQ16-[30-1200/1]-V[5-48/1]-K[5,​6]-G[5-48/1]-Q[5,​6]
PSSFJQ18-[30-1200/1]-V[5-54/1]-K[5,​6]-G[5-54/1]-Q[5,​6]
PSSFJQ20-[30-1200/1]-V[6-60/1]-K[6,​7]-G[6-60/1]-Q[6,​7]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSEnd Shape (Left) Material Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Hardness Shaft End Type B
(mm)
F
(mm)
G
(mm)
K
(mm)
Q
(mm)
Tapped (Coarse) [M]
(mm)
Threaded (Coarse) [P]
(mm)
V
(mm)
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 1844--5 ~ 18
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 244 ~ 54 ~ 5--5 ~ 24
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 304 ~ 54 ~ 5--5 ~ 30
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 3655--5 ~ 36
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 3955--5 ~ 39
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 455 ~ 65 ~ 6--5 ~ 45
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 485 ~ 65 ~ 6--5 ~ 48
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--5 ~ 545 ~ 65 ~ 6--5 ~ 54
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--6 ~ 606 ~ 76 ~ 7--6 ~ 60
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)Solid, Both Ends Grooved--6 ~ 756 ~ 76 ~ 7--6 ~ 75
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)Solid, Both Ends Grooved--6 ~ 9077--6 ~ 90
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 18-4---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 24-4 ~ 5---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 30-4 ~ 5---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 36-5---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 39-5---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 45-5 ~ 6---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 48-5 ~ 6---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--5 ~ 54-5 ~ 6---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--6 ~ 60-6 ~ 7---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)Solid, One End Grooved--6 ~ 75-6 ~ 7---
1 Piece(s) 10 Day(s) or more 10No Machining[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)Solid, One End Grooved--6 ~ 90-7---
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)One End Threaded2 ~ 282 ~ 305 ~ 18-4-3 ~ 6-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)One End Threaded2 ~ 372 ~ 405 ~ 24-4 ~ 5-3 ~ 8-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)One End Threaded2 ~ 472 ~ 505 ~ 30-4 ~ 5-4 ~ 10-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)One End Threaded2 ~ 552 ~ 605 ~ 36-5-5 ~ 12-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)One End Threaded2 ~ 552 ~ 605 ~ 39-5-5 ~ 12-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 998Induction Hardened (58HRC~)One End Threaded2 ~ 552 ~ 605 ~ 45-5 ~ 6-5 ~ 12-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 752 ~ 805 ~ 48-5 ~ 6-5 ~ 16-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 752 ~ 805 ~ 54-5 ~ 6-5 ~ 16-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 952 ~ 1006 ~ 60-6 ~ 7-6 ~ 20-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)One End Threaded2 ~ 1152 ~ 1206 ~ 75-6 ~ 7-8 ~ 24-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Threaded2 ~ 1452 ~ 1506 ~ 90-7-8 ~ 30-
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.2 ~ 28-5 ~ 18-4---
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.2 ~ 37-5 ~ 24-4 ~ 5---
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.2 ~ 47-5 ~ 30-4 ~ 5---
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.2 ~ 55-5 ~ 36-5---
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.2 ~ 75-5 ~ 48-5 ~ 6---
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.2 ~ 95-6 ~ 60-6 ~ 7---
1 Piece(s) 10 Day(s) or more 10Threaded[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Threaded with O.D. same as Shaft O.D.2 ~ 145-6 ~ 90-7---
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)One End Tapped--5 ~ 18-43--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)One End Tapped--5 ~ 24-4 ~ 53 ~ 5--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)One End Tapped--5 ~ 30-4 ~ 53 ~ 6--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)One End Tapped--5 ~ 36-54 ~ 8--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)One End Tapped--5 ~ 39-54 ~ 8--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1525 ~ 1000Induction Hardened (58HRC~)One End Tapped--5 ~ 45-5 ~ 64 ~ 10--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)One End Tapped--5 ~ 48-5 ~ 64 ~ 10--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating1830 ~ 1200Induction Hardened (58HRC~)One End Tapped--5 ~ 54-5 ~ 64 ~ 12--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)One End Tapped--6 ~ 60-6 ~ 74 ~ 12--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating2530 ~ 1200Induction Hardened (58HRC~)One End Tapped--6 ~ 75-6 ~ 74 ~ 16--
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)One End Tapped--6 ~ 90-76 ~ 24--
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating620 ~ 600Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 1844--5 ~ 18
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating820 ~ 800Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 244 ~ 54 ~ 5--5 ~ 24
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1020 ~ 800Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 304 ~ 54 ~ 5--5 ~ 30
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1220 ~ 1000Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 3655--5 ~ 36
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1325 ~ 1000Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 3955--5 ~ 39
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1525 ~ 1000Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 455 ~ 65 ~ 6--5 ~ 45
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1630 ~ 1200Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 485 ~ 65 ~ 6--5 ~ 48
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating1830 ~ 1200Induction Hardened (56HRC~)Solid, Both Ends Grooved--5 ~ 545 ~ 65 ~ 6--5 ~ 54
1 Piece(s) 10 Day(s) or more 10Set Screw Grooved[Stainless Steel] SUS440C or 13Cr stainlessHard Chrome Plating2030 ~ 1200Induction Hardened (56HRC~)Solid, Both Ends Grooved--6 ~ 606 ~ 76 ~ 7--6 ~ 60

Loading...

 

Basic Information

Basic Shape Solid End Shape (Right) Set Screw Grooved Shaft End Perpendicularity Perpendicularity (0.2)
Heat Treatment Induction Hardened Shaft Fit Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)