(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

- Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
- A straight positioning pin made of high hardness stainless steel.
- Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
- Tapped type locating pin provided tapped thread for disassembled.
- For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
- The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.

Locating Pins - High Hardness Stainless Steel, Straight (Press Fit):Related Image

[ ! ]D-2EtanA≥0.73 (Tip Diameter Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577
tan45°≈1 tan60°≈1.732
[ ! ]Dimensions not specified in Tapped Type drawings are the same as those of Press Fit Type.

[ M ]Material[ H ]HardnessTip ShapeType
Press Fit
High Hardness Stainless Steel35HRC~TaperedALPSTA
SphereALPSQA

Specifications

Part Number-L-E-A
    
Type D Tol.D
ALPSTA M6-L14.0-E2.5-A30

■Tolerance Selection
Dm6p6g6h7
3+0.008
+0.002
+0.012
+0.006
-0.002
-0.008
0
-0.010
4~6+0.012
+0.004
+0.02
+0.012
-0.004
-0.012
0
-0.012
8, 10+0.015
+0.006
+0.024
+0.015
-0.005
-0.014
0
-0.015

Part NumberL
0.1mm Increment
Tapered Type OnlyC1
E
0.1mm Increment
A
Selection
TypeD Tol.D
ALPSTA (Tapered)
ALPSQA (Sphere)
M (m6)
P (p6)
G (g6)
H
(h7)
 33.0~40.00.5~10.015
30
45
60
0.51
 411
 511
 611
 811
1011

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
ALPSQAG3-L[3-40/0.1]
ALPSQAG4-L[3-40/0.1]
ALPSQAG5-L[3-40/0.1]
ALPSQAG6-L[3-40/0.1]
ALPSQAG8-L[3-40/0.1]
ALPSQAG10-L[3-40/0.1]
ALPSQAH3-L[3-40/0.1]
ALPSQAH4-L[3-40/0.1]
ALPSQAH5-L[3-40/0.1]
ALPSQAH6-L[3-40/0.1]
ALPSQAH8-L[3-40/0.1]
ALPSQAH10-L[3-40/0.1]
ALPSQAM3-L[3-40/0.1]
ALPSQAM4-L[3-40/0.1]
ALPSQAM5-L[3-40/0.1]
ALPSQAM6-L[3-40/0.1]
ALPSQAM8-L[3-40/0.1]
ALPSQAM10-L[3-40/0.1]
ALPSQAP3-L[3-40/0.1]
ALPSQAP4-L[3-40/0.1]
ALPSQAP5-L[3-40/0.1]
ALPSQAP6-L[3-40/0.1]
ALPSQAP8-L[3-40/0.1]
ALPSQAP10-L[3-40/0.1]
ALPSTAG3-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAG4-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAG5-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAG6-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAG8-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAG10-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAH3-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAH4-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAH5-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAH6-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAH8-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAH10-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAM3-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAM4-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAM5-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAM6-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAM8-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAM10-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAP3-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAP4-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAP5-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAP6-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAP8-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
ALPSTAP10-L[3-40/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Type Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(Ø)
Mounting Side Tolerance A
(°)
E
(mm)
L
(mm)
1 Piece(s) 10 Day(s) or more 10Sphericalg63g6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalg64g6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalg65g6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalg66g6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalg68g6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalg610g6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalh73h7--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalh74h7--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalh75h7--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalh76h7--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalh78h7--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalh710h7--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalm63m6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalm64m6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalm65m6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalm66m6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalm68m6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalm610m6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalp63p6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalp64p6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalp65p6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalp66p6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalp68p6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Sphericalp610p6--3 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedg63g615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedg64g615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedg65g615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedg66g615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedg68g615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedg610g615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedh73h715 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedh74h715 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedh75h715 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedh76h715 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedh78h715 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedh710h715 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedm63m615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedm64m615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedm65m615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedm66m615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedm68m615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedm610m615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedp63p615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedp64p615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedp65p615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedp66p615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedp68p615 ~ 600.5 ~ 103 ~ 40
1 Piece(s) 10 Day(s) or more 10Taperedp610p615 ~ 600.5 ~ 103 ~ 40

Loading...

  1. 1
 

Basic Information

Basic Shape Straight / Air Vent Insertion Guide Tip Shape Round Insertion Guide Specifications Not Provided
Mounting Side Shape Straight (Press-Fit) Surface Treatment Not Provided Heat Treatment Not Provided
Material High Hardness Stainless Steel Dimension Configurable Type P, L, B Configurable

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)