(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Locating Pins - Small Head, Round Tapered - Tapped

Locating Pins - Small Head, Round Tapered - Tapped

- Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished and centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.

Locating Pins - Small Head, Round Tapered - Tapped:Related Image
 
Material
No.
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
RoundDiamond
(1)SKS3 Equivalent-Treated Hardness: 60~63HRCKFTAKFTD
(2)SKS3 EquivalentHard Chrome PlatingTreated Hardness: 50~55HRC
Plating Hardness: 750HV~
GKFTAGKFTD
(3)SKS3 Equivalent--BKFTABKFTD
(4)SUS304--SKFTASKFTD
(5)SUS304Hard Chrome PlatingPlating Hardness: 750HV~HKFTAHKFTD
(6)SUS440C or 13Cr stainless-Treated Hardness: 50~55HRCCKFTACKFTD

Specifications

Part Number-P-L-B-E-A
     
Type Shape D Tol. P Tol. D
GKFT A G S 10T-P13.00-L6-B4.0-E10.0-A15

■Tolerance Selection
D
or
P
Standard Grade
MPGHS
m6p6g6h7-
5.00
~
6.00
+0.012
+0.004
+0.020
+0.012
-0.004
-0.012
0
-0.012
0
-0.01
6.01
~
10.00
+0.015
+0.006
+0.024
+0.015
-0.005
-0.014
0
-0.015
10.01
~
18.00
+0.018
+0.007
+0.029
+0.018
-0.006
-0.017
0
-0.018
18.01
~
30.00
+0.021
+0.008
+0.035
+0.022
-0.007
-0.020
0
-0.021
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole sometimes not available for SUS304.
[ ! ]P-2Etan A≥0.73 (Tip dia. Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577
tan45°=1 tan60°≈1.732

■Tapped
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
E
0.1mm Increment
A Selection(W)M (Coarse)* Tightening Torque
N • cm
TypeShapeD Tolerance SelectionP Tolerance SelectionD
KFT
GKFT
BKFT
SKFT
HKFT
CKFT
A (Round)



D (Diamond)
M
P
G
H
S
M
P
G
H
 55.00~8.005(9)~101.5~15.0(12.0)0.5~15.015

30

45

60
2.2M2- 3
 6 6.00~10.006(9)~121.5~15.0(12.0)3M3  98 5
 6T3M2.6- 4
88.50~15.008(12)~161.5~30.0(15.0)3.5M5 461 8
 8T6(12)~163.5M4 225 6
1010.00~17.0010(12)~203.0~30.0(20.0)4M5 461 8
10T6(12)~164M4 225 6
1212.00~18.0012~243.0~30.0(20.0)5M5 461 8
12T8(12)~185M4 225 6
1313.00~20.0013(14)~265.0~30.0(20.0)5.5M8191110
13T8(14)~205.5M6784 9
1616.00~27.0016~325.0~30.0(27.0)7M8191112
16T10(14)~247M6784 9
2020.00~30.0020~405.0~30.09M8191112
20T12(18)~309M6784 9
[ ! ]Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
[ ! ]Note the strength of under-head part >> P.1618 [ ! ]L dimension and B dimension in ( ) are applicable to Diamond Shape [ ! ]Please confirm Pilot Hole Depth (>> P.1618). Holes may go through.
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2365.) Not applicable when using locking materials or lock washers.

Alterations

Locating Pins - Small Head, Round Tapered - Tapped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BKFTAGG5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG8-P[8-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG8T-P[8-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG10-P[10-17/0.01]-L[10-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG10T-P[10-17/0.01]-L[6-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG12-P[12-18/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG12T-P[12-18/0.01]-L[8-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-AA[15,​30,​45,​60]
BKFTAGG13T-P[13-20/0.01]-L[8-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG16-P[16-27/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG16T-P[16-27/0.01]-L[10-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGG20T-P[20-30/0.01]-L[12-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH8-P[8-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH8T-P[8-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH10-P[10-17/0.01]-L[10-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH10T-P[10-17/0.01]-L[6-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH12-P[12-18/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH12T-P[12-18/0.01]-L[8-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-AA[15,​30,​45,​60]
BKFTAGH13T-P[13-20/0.01]-L[8-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH16-P[16-27/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH16T-P[16-27/0.01]-L[10-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGH20T-P[20-30/0.01]-L[12-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM8-P[8-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM8T-P[8-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM10-P[10-17/0.01]-L[10-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM10T-P[10-17/0.01]-L[6-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM12-P[12-18/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM12T-P[12-18/0.01]-L[8-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-AA[15,​30,​45,​60]
BKFTAGM13T-P[13-20/0.01]-L[8-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM16-P[16-27/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM16T-P[16-27/0.01]-L[10-24/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM20-P[20-30/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGM20T-P[20-30/0.01]-L[12-30/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP5-P[5-8/0.01]-L[5-10/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP6-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP6T-P[6-10/0.01]-L[6-12/1]-B[1.5-15/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP8-P[8-15/0.01]-L[8-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP8T-P[8-15/0.01]-L[6-16/1]-B[1.5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP10-P[10-17/0.01]-L[10-20/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP10T-P[10-17/0.01]-L[6-16/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP12-P[12-18/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP12T-P[12-18/0.01]-L[8-18/1]-B[3-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
BKFTAGP13-P[13-20/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-15/0.1]-AA[15,​30,​45,​60]
BKFTAGP13T-P[13-20/0.01]-L[8-20/1]-B[5-30/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Shape Surface Treatment Heat Treatment Material Locating Side Outer Dia. P (Ø)
(mm)
Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(Ø)
Mounting Side Tolerance Screw Dia. M
(mm)
A
(°)
AA
(°)
B
(mm)
E
(mm)
L
(mm)
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent5 ~ 8g65g6-15 ~ 60-1.5 ~ 150.5 ~ 155 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10g66g6315 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10g66Tg62.615 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15g68g6515 ~ 60-1.5 ~ 300.5 ~ 158 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15g68Tg6415 ~ 60-1.5 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17g610g6515 ~ 60-3 ~ 300.5 ~ 1510 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17g610Tg6415 ~ 60-3 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18g612g6515 ~ 60-3 ~ 300.5 ~ 1512 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18g612Tg6415 ~ 60-3 ~ 300.5 ~ 158 ~ 18
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20g613g6815 ~ 60-5 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20g613g68-15 ~ 605 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20g613Tg6615 ~ 60-5 ~ 300.5 ~ 158 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent16 ~ 27g616g6815 ~ 60-5 ~ 300.5 ~ 1516 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent16 ~ 27g616Tg6615 ~ 60-5 ~ 300.5 ~ 1510 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent20 ~ 30g620g6815 ~ 60-5 ~ 300.5 ~ 1520 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent20 ~ 30g620Tg6615 ~ 60-5 ~ 300.5 ~ 1512 ~ 30
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent5 ~ 8h75g6-15 ~ 60-1.5 ~ 150.5 ~ 155 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10h76g6315 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10h76Tg62.615 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15h78g6515 ~ 60-1.5 ~ 300.5 ~ 158 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15h78Tg6415 ~ 60-1.5 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17h710g6515 ~ 60-3 ~ 300.5 ~ 1510 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17h710Tg6415 ~ 60-3 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18h712g6515 ~ 60-3 ~ 300.5 ~ 1512 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18h712Tg6415 ~ 60-3 ~ 300.5 ~ 158 ~ 18
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20h713g6815 ~ 60-5 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20h713g68-15 ~ 605 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20h713Tg6615 ~ 60-5 ~ 300.5 ~ 158 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent16 ~ 27h716g6815 ~ 60-5 ~ 300.5 ~ 1516 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent16 ~ 27h716Tg6615 ~ 60-5 ~ 300.5 ~ 1510 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent20 ~ 30h720g6815 ~ 60-5 ~ 300.5 ~ 1520 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent20 ~ 30h720Tg6615 ~ 60-5 ~ 300.5 ~ 1512 ~ 30
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent5 ~ 8m65g6-15 ~ 60-1.5 ~ 150.5 ~ 155 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10m66g6315 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10m66Tg62.615 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15m68g6515 ~ 60-1.5 ~ 300.5 ~ 158 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15m68Tg6415 ~ 60-1.5 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17m610g6515 ~ 60-3 ~ 300.5 ~ 1510 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17m610Tg6415 ~ 60-3 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18m612g6515 ~ 60-3 ~ 300.5 ~ 1512 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18m612Tg6415 ~ 60-3 ~ 300.5 ~ 158 ~ 18
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20m613g6815 ~ 60-5 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20m613g68-15 ~ 605 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20m613Tg6615 ~ 60-5 ~ 300.5 ~ 158 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent16 ~ 27m616g6815 ~ 60-5 ~ 300.5 ~ 1516 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent16 ~ 27m616Tg6615 ~ 60-5 ~ 300.5 ~ 1510 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent20 ~ 30m620g6815 ~ 60-5 ~ 300.5 ~ 1520 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent20 ~ 30m620Tg6615 ~ 60-5 ~ 300.5 ~ 1512 ~ 30
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent5 ~ 8p65g6-15 ~ 60-1.5 ~ 150.5 ~ 155 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10p66g6315 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent6 ~ 10p66Tg62.615 ~ 60-1.5 ~ 150.5 ~ 156 ~ 12
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15p68g6515 ~ 60-1.5 ~ 300.5 ~ 158 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent8 ~ 15p68Tg6415 ~ 60-1.5 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17p610g6515 ~ 60-3 ~ 300.5 ~ 1510 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent10 ~ 17p610Tg6415 ~ 60-3 ~ 300.5 ~ 156 ~ 16
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18p612g6515 ~ 60-3 ~ 300.5 ~ 1512 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent12 ~ 18p612Tg6415 ~ 60-3 ~ 300.5 ~ 158 ~ 18
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20p613g6815 ~ 60-5 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20p613g68-15 ~ 605 ~ 300.5 ~ 1513 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Steel] SKS3 Equivalent13 ~ 20p613Tg6615 ~ 60-5 ~ 300.5 ~ 158 ~ 20

Loading...

 

Basic Information

Basic Shape Large Head Insertion Guide Tip Type Tapered Insertion Guide Specifications Not Provided
Mounting Side Shape Tapped

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)