(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Locating Pins - Plastic, Large Head - Press Fit

Locating Pins - Plastic, Large Head - Press Fit

- Locating Pins - Plastic, Large Head - Press Fit from MISUMI.
- Plastic Locating Pins which prevent workpiece damage.
- Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
- The outer diameter tolerance is the result of measurement at room temperature.
- The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
- The mounting method is press fit, with m6 tolerance.

Locating Pins - Plastic, Large Head, Tip Shape Selectable - Press Fit:Related Image
[ ! ]The outer diameter tolerance is the result of measurement at room temperature.
 
TypeFixed PartHead Shape[ M ]MaterialOperating Ambient Temperature
P ConfigurableP, L, B Configurable
JPFJPZ (Standard)A (Tapered)
FA (Flat)
Q (Sphere)
Polyacetal (Black)-45~95°C
MJPMFPMC Nylon (Blue)-40~120°C
DJPDFPConductive MC Nylon CDR2 (Black)-40~120°C
JKPFKPPEEK (Natural Ivory)-50~250°C
[ ! ]Some combinations are not available. Refer to the price list to select the available combination.
 
[ ! ]Characteristics of Polyacetal, MC Nylon, Conductive MC Nylon, PEEK
>> P.2-953, 954
(For Polyacetal and MC Nylon, refer to Standard Grade.)

Specifications

Part Number-P
 
Type Fixed Part Head Shape D
JP Z A 8-10.00
■P Configurable
Part NumberP
0.01mm Increment
LBCm1
TypeFixed PartHead ShapeD D
Tolerance m6
JP

MJP

DJP

JKP
Z (Standard)A (Tapered)
FA (Flat)
Q (Sphere)
1+0.008
+0.002
1.50~2.50330.30.50
2+0.008
+0.002
2.50~4.00430.510
3+0.008
+0.002
3.50~6.00550.521
4+0.012
+0.004
4.50~7.0056131
5+0.012
+0.004
5.50~8.00106131
6+0.012
+0.004
 6.50~10.00108131
8+0.015
+0.006
 9.00~13.001581.541
10+0.015
+0.006
11.00~15.001510241
■P, L, B Configurable
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
Cm1
TypeFixed PartHead ShapeD D
Tolerance m6
FJP

MFP

DFP

FKP
Z (Standard)A (Tapered)
FA (Flat)
Q (Sphere)
1+0.008
+0.002
1.50~2.502, 32.0~5.00.30.50
2+0.008
+0.002
2.50~4.002~62.0~10.00.510
3+0.008
+0.002
3.50~6.003~62.0~10.00.521
4+0.012
+0.004
4.50~7.004~82.0~10.0131
5+0.012
+0.004
5.50~8.00 5~102.0~10.0131
6+0.012
+0.004
 6.50~10.00 6~122.0~12.0131
8+0.015
+0.006
 9.00~13.00 8~162.0 (3.0)~15.01.541
10+0.015
+0.006
11.00~15.0010~203.0 (4.0)~20.0241
[ ! ]B dimension of Flat Type is in ( ).

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
DFPZA1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
DFPZA2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
DFPZA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
DFPZA4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
DFPZA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
DFPZA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
DFPZA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
DFPZA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
DFPZFA1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
DFPZFA2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
DFPZFA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
DFPZFA4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
DFPZFA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
DFPZFA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
DFPZFA8-P[9-13/0.01]-L[8-16/1]-B[3-15/0.1]
DFPZFA10-P[11-15/0.01]-L[10-20/1]-B[4-15/0.1]
DFPZQ1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
DFPZQ2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
DFPZQ3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
DFPZQ4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
DFPZQ5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
DFPZQ6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
DFPZQ8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
DFPZQ10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
DJPZA1-P[1.5-2.5/0.01]
DJPZA2-P[2.5-4/0.01]
DJPZA3-P[3.5-6/0.01]
DJPZA4-P[4.5-7/0.01]
DJPZA5-P[5.5-8/0.01]
DJPZA6-P[6.5-10/0.01]
DJPZA8-P[9-13/0.01]
DJPZA10-P[11-15/0.01]
DJPZFA1-P[1.5-2.5/0.01]
DJPZFA2-P[2.5-4/0.01]
DJPZFA3-P[3.5-6/0.01]
DJPZFA4-P[4.5-7/0.01]
DJPZFA5-P[5.5-8/0.01]
DJPZFA6-P[6.5-10/0.01]
DJPZFA8-P[9-13/0.01]
DJPZFA10-P[11-15/0.01]
DJPZQ1-P[1.5-2.5/0.01]
DJPZQ2-P[2.5-4/0.01]
DJPZQ3-P[3.5-6/0.01]
DJPZQ4-P[4.5-7/0.01]
DJPZQ5-P[5.5-8/0.01]
DJPZQ6-P[6.5-10/0.01]
DJPZQ8-P[9-13/0.01]
DJPZQ10-P[11-15/0.01]
FJPZA1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
FJPZA2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
FJPZA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
FJPZA4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
FJPZA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1]
FJPZA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
FJPZA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
FJPZA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1]
FJPZFA1-P[1.5-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
FJPZFA2-P[2.5-4/0.01]-L[2-6/1]-B[2-10/0.1]
FJPZFA3-P[3.5-6/0.01]-L[3-6/1]-B[2-10/0.1]
FJPZFA4-P[4.5-7/0.01]-L[4-8/1]-B[2-10/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Type Material Locating Side Outer Dia. P (Ø)
(mm)
Mounting Side Outer Dia. D
(Ø)
Mounting Section Length L
(mm)
Locating Section Length B
(mm)
Positioning Part Length B
(mm)
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR21.5 ~ 2.512 ~ 3-2 ~ 5
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR22.5 ~ 422 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR23.5 ~ 633 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR24.5 ~ 744 ~ 8-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR25.5 ~ 855 ~ 10-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR26.5 ~ 1066 ~ 12-2 ~ 12
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR29 ~ 1388 ~ 16-2 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR211 ~ 151010 ~ 20-3 ~ 20
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR21.5 ~ 2.512 ~ 3-2 ~ 5
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR22.5 ~ 422 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR23.5 ~ 633 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR24.5 ~ 744 ~ 8-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR25.5 ~ 855 ~ 10-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR26.5 ~ 1066 ~ 12-2 ~ 12
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR29 ~ 1388 ~ 16-3 ~ 15
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR211 ~ 151010 ~ 20-4 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR21.5 ~ 2.512 ~ 3-2 ~ 5
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR22.5 ~ 422 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR23.5 ~ 633 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR24.5 ~ 744 ~ 8-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR25.5 ~ 855 ~ 10-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR26.5 ~ 1066 ~ 12-2 ~ 12
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR29 ~ 1388 ~ 16-2 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR211 ~ 151010 ~ 20-3 ~ 20
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR21.5 ~ 2.5133-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR22.5 ~ 4243-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR23.5 ~ 6355-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR24.5 ~ 7456-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR25.5 ~ 85106-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR26.5 ~ 106108-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR29 ~ 138158-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Conductive MC Nylon CDR211 ~ 15101510-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR21.5 ~ 2.5133-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR22.5 ~ 4243-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR23.5 ~ 6355-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR24.5 ~ 7456-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR25.5 ~ 85106-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR26.5 ~ 106108-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR29 ~ 138158-
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Conductive MC Nylon CDR211 ~ 15101510-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR21.5 ~ 2.5133-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR22.5 ~ 4243-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR23.5 ~ 6355-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR24.5 ~ 7456-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR25.5 ~ 85106-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR26.5 ~ 106108-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR29 ~ 138158-
1 Piece(s) 10 Day(s) or more 10Spherical[Resin] Conductive MC Nylon CDR211 ~ 15101510-
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal1.5 ~ 2.512 ~ 3-2 ~ 5
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal2.5 ~ 422 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal3.5 ~ 633 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal4.5 ~ 744 ~ 8-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal5.5 ~ 855 ~ 10-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal6.5 ~ 1066 ~ 12-2 ~ 12
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal9 ~ 1388 ~ 16-2 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Resin] Polyacetal11 ~ 151010 ~ 20-3 ~ 20
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Polyacetal1.5 ~ 2.512 ~ 3-2 ~ 5
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Polyacetal2.5 ~ 422 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Polyacetal3.5 ~ 633 ~ 6-2 ~ 10
1 Piece(s) 10 Day(s) or more 10Flat[Resin] Polyacetal4.5 ~ 744 ~ 8-2 ~ 10

Loading...

 

Basic Information

Basic Shape Large Head Insertion Guide Tip Shape Round Insertion Guide Specifications Not Provided
Mounting Side Shape Straight (Press-Fit) Surface Treatment Not Provided Heat Treatment Not Provided
Locating Side O.D. Tolerance 0/-0.05 Mounting Side Tolerance m6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)