(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Locating Pins Double Stepped - Tapped

Locating Pins Double Stepped - Tapped

[Features]Suitable for positioning workpieces with different hole diameters. It is attached with a female thread.

Locating Pins - Double Stepped - Tapped:Related Image
[ ! ]SUS304 may not be polished and may have no centering hole.
 
[ M ]Material[ S ]Surface Treatment[ H ]HardnessTapped
D Tolerance g6
SKS3 Equivalent-Treated Hardness: 60 ~ 63HRCWPG
SUS304--SWPG
SUS304Hard Chrome PlatingPlating Hardness: 750HV ~HWPG

Specifications

Part Number-P-Q-L-B-E-F
HWPG16-P20.02-Q15.30-L18-B12.3-E3.1-F5.0
Dg6
6-0.004
-0.012
8, 10-0.005
-0.014
12, 16-0.006
-0.017
20-0.007
-0.020
■Tapped
Part NumberP
0.01mm Increment
Q
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
E
0.1mm Increment
F
0.1mm Increment
mM (Coarse)* Tightening Torque
N • cm
TypeD
D Tolerance g6
WPG
SWPG
HWPG
6 6.00~10.002.00~9.00 6~122.0~20.01.0~10.02.0~20.03M3985
8 8.00~13.00 3.00~12.00 8~164M42258
1010.00~15.00 3.00~14.0010~203.0~20.03.0~20.04M54618
1212.00~16.00 5.00~15.0012~244M54618
1616.00~25.0010.00~24.0016~325.0~20.05.0~20.05M8191112
2020.00~30.0013.00~29.0020~405M8191112
[ ! ]P>Q [ ! ]Note the strength of under-head part. >> P.1566
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2297.) Not applicable when using locking materials or lock washers.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
HWPG6-P[6-10/0.01]-Q[2-9/0.01]-L[6-12/1]-B[2-20/0.1]-E[1-10/0.1]-F[2-20/0.1]
HWPG8-P[8-13/0.01]-Q[3-12/0.01]-L[8-16/1]-B[2-20/0.1]-E[1-10/0.1]-F[2-20/0.1]
HWPG10-P[10-15/0.01]-Q[3-14/0.01]-L[10-20/1]-B[3-20/0.1]-E[1-10/0.1]-F[3-20/0.1]
HWPG12-P[12-16/0.01]-Q[5-15/0.01]-L[12-24/1]-B[3-20/0.1]-E[1-10/0.1]-F[3-20/0.1]
HWPG16-P[16-25/0.01]-Q[10-24/0.01]-L[16-32/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1]
HWPG20-P[20-30/0.01]-Q[13-29/0.01]-L[20-40/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1]
SWPG6-P[6-10/0.01]-Q[2-9/0.01]-L[6-12/1]-B[2-20/0.1]-E[1-10/0.1]-F[2-20/0.1]
SWPG8-P[8-13/0.01]-Q[3-12/0.01]-L[8-16/1]-B[2-20/0.1]-E[1-10/0.1]-F[2-20/0.1]
SWPG10-P[10-15/0.01]-Q[3-14/0.01]-L[10-20/1]-B[3-20/0.1]-E[1-10/0.1]-F[3-20/0.1]
SWPG12-P[12-16/0.01]-Q[5-15/0.01]-L[12-24/1]-B[3-20/0.1]-E[1-10/0.1]-F[3-20/0.1]
SWPG16-P[16-25/0.01]-Q[10-24/0.01]-L[16-32/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1]
SWPG20-P[20-30/0.01]-Q[13-29/0.01]-L[20-40/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1]
WPG6-P[6-10/0.01]-Q[2-9/0.01]-L[6-12/1]-B[2-20/0.1]-E[1-10/0.1]-F[2-20/0.1]
WPG8-P[8-13/0.01]-Q[3-12/0.01]-L[8-16/1]-B[2-20/0.1]-E[1-10/0.1]-F[2-20/0.1]
WPG10-P[10-15/0.01]-Q[3-14/0.01]-L[10-20/1]-B[3-20/0.1]-E[1-10/0.1]-F[3-20/0.1]
WPG12-P[12-16/0.01]-Q[5-15/0.01]-L[12-24/1]-B[3-20/0.1]-E[1-10/0.1]-F[3-20/0.1]
WPG16-P[16-25/0.01]-Q[10-24/0.01]-L[16-32/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1]
WPG20-P[20-30/0.01]-Q[13-29/0.01]-L[20-40/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSSurface Treatment Heat Treatment Material Locating Side Outer Dia. P (Ø)
(mm)
Mounting Side Outer Dia. D
(Ø)
B
(mm)
E
(mm)
F
(mm)
L
(mm)
Q
(mm)
1 Piece(s) 10 Day(s) or more 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3046 ~ 1062 ~ 201 ~ 102 ~ 206 ~ 122 ~ 9
1 Piece(s) 10 Day(s) or more 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3048 ~ 1382 ~ 201 ~ 102 ~ 208 ~ 163 ~ 12
1 Piece(s) 10 Day(s) or more 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS30410 ~ 15103 ~ 201 ~ 103 ~ 2010 ~ 203 ~ 14
1 Piece(s) 10 Day(s) or more 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS30412 ~ 16123 ~ 201 ~ 103 ~ 2012 ~ 245 ~ 15
1 Piece(s) 10 Day(s) or more 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS30416 ~ 25165 ~ 201 ~ 105 ~ 2016 ~ 3210 ~ 24
1 Piece(s) 10 Day(s) or more 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS30420 ~ 30205 ~ 201 ~ 105 ~ 2020 ~ 4013 ~ 29
1 Piece(s) 9 Day(s) or more 10Not ProvidedNot Provided[Stainless Steel] SUS3046 ~ 1062 ~ 201 ~ 102 ~ 206 ~ 122 ~ 9
1 Piece(s) 9 Day(s) or more 10Not ProvidedNot Provided[Stainless Steel] SUS3048 ~ 1382 ~ 201 ~ 102 ~ 208 ~ 163 ~ 12
1 Piece(s) 9 Day(s) or more 10Not ProvidedNot Provided[Stainless Steel] SUS30410 ~ 15103 ~ 201 ~ 103 ~ 2010 ~ 203 ~ 14
1 Piece(s) 9 Day(s) or more 10Not ProvidedNot Provided[Stainless Steel] SUS30412 ~ 16123 ~ 201 ~ 103 ~ 2012 ~ 245 ~ 15
1 Piece(s) 9 Day(s) or more 10Not ProvidedNot Provided[Stainless Steel] SUS30416 ~ 25165 ~ 201 ~ 105 ~ 2016 ~ 3210 ~ 24
1 Piece(s) 9 Day(s) or more 10Not ProvidedNot Provided[Stainless Steel] SUS30420 ~ 30205 ~ 201 ~ 105 ~ 2020 ~ 4013 ~ 29
1 Piece(s) 10 Day(s) or more 10Not ProvidedDirectly Quenching[Steel] SKS3 Equivalent6 ~ 1062 ~ 201 ~ 102 ~ 206 ~ 122 ~ 9
1 Piece(s) 10 Day(s) or more 10Not ProvidedDirectly Quenching[Steel] SKS3 Equivalent8 ~ 1382 ~ 201 ~ 102 ~ 208 ~ 163 ~ 12
1 Piece(s) 10 Day(s) or more 10Not ProvidedDirectly Quenching[Steel] SKS3 Equivalent10 ~ 15103 ~ 201 ~ 103 ~ 2010 ~ 203 ~ 14
1 Piece(s) 10 Day(s) or more 10Not ProvidedDirectly Quenching[Steel] SKS3 Equivalent12 ~ 16123 ~ 201 ~ 103 ~ 2012 ~ 245 ~ 15
1 Piece(s) 10 Day(s) or more 10Not ProvidedDirectly Quenching[Steel] SKS3 Equivalent16 ~ 25165 ~ 201 ~ 105 ~ 2016 ~ 3210 ~ 24
1 Piece(s) 10 Day(s) or more 10Not ProvidedDirectly Quenching[Steel] SKS3 Equivalent20 ~ 30205 ~ 201 ~ 105 ~ 2020 ~ 4013 ~ 29

Loading...

  1. 1

Example

Locating Pins - Double Stepped - Tapped:Related Image
 

Basic Information

Basic Shape Double-Stepped Insertion Guide Tip Shape Round Insertion Guide Tip Type Tapered
Insertion Guide Specifications Not Provided Mounting Side Shape Tapped Locating Side O.D. Tolerance 0/-0.01
Mounting Side Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)