(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Locating Pins - Straight, Sphere (Tapped)

Locating Pins - Straight, Sphere (Tapped)

- Locating Pins - Straight, Sphere (Tapped) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.

Locating Pins - Straight, Sphere - Tapped:Related Image

[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]When the D dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]On some combination of dimensions, the center hole may not be available.
[ ! ]Polishing and centering hole is sometimes not available for SUS304.
 
Material No.[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
Tapped
(1)SKS3 Equivalent-Treated Hardness: 60~63HRCLPSQTA
(2)SKS3 EquivalentHard Chrome PlatingTreated Hardness: 50~55HRC
Plating Hardness: 750HV~
GLPSQTA
(3)SKS3 Equivalent--BLPSQTA
(4)SUS304--SLPSQTA
(5)SUS304Hard Chrome PlatingPlating Hardness: 750HV~HLPSQTA
(6)SUS440C or 13Cr stainless-Treated Hardness: 50~55HRCCLPSQTA

Specifications

Part Number-L
     
Type Tolerance D
BLPSQTA G8-L29.3

■Tolerance Selection
DStandard Grade
MPGH
m6p6g6h7
5~6+0.012
+0.004
+0.020
+0.012
-0.004
-0.012
0
-0.012
8, 10+0.015
+0.006
+0.024
+0.015
-0.005
-0.014
0
-0.015

■Tapped
Part NumberL 0.1mm IncrementM (Coarse)* Tightening Torque
N • cm
TypeD Tol.D
LPSQTA
GLPSQTA
BLPSQTA
SLPSQTA
HLPSQTA
CLPSQTA
M (m6)
P (p6)
G (g6)
H (h7)
510.0~30.0M2-3
610.0~40.0M3985
815.0~40.0M54618
10M54618
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2365.) Not applicable when using locking materials or lock washers.

Alterations

Locating Pins - Straight, Sphere - Tapped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BLPSQTAG5-L[10-30/0.1]
BLPSQTAG6-L[10-40/0.1]
BLPSQTAG8-L[15-40/0.1]
BLPSQTAG10-L[15-40/0.1]
BLPSQTAH5-L[10-30/0.1]
BLPSQTAH6-L[10-40/0.1]
BLPSQTAH8-L[15-40/0.1]
BLPSQTAH10-L[15-40/0.1]
BLPSQTAM5-L[10-30/0.1]
BLPSQTAM6-L[10-40/0.1]
BLPSQTAM8-L[15-40/0.1]
BLPSQTAM10-L[15-40/0.1]
BLPSQTAP5-L[10-30/0.1]
BLPSQTAP6-L[10-40/0.1]
BLPSQTAP8-L[15-40/0.1]
BLPSQTAP10-L[15-40/0.1]
CLPSQTAG5-L[10-30/0.1]
CLPSQTAG6-L[10-40/0.1]
CLPSQTAG8-L[15-40/0.1]
CLPSQTAG10-L[15-40/0.1]
CLPSQTAH5-L[10-30/0.1]
CLPSQTAH6-L[10-40/0.1]
CLPSQTAH8-L[15-40/0.1]
CLPSQTAH10-L[15-40/0.1]
CLPSQTAM5-L[10-30/0.1]
CLPSQTAM6-L[10-40/0.1]
CLPSQTAM8-L[15-40/0.1]
CLPSQTAM10-L[15-40/0.1]
CLPSQTAP5-L[10-30/0.1]
CLPSQTAP6-L[10-40/0.1]
CLPSQTAP8-L[15-40/0.1]
CLPSQTAP10-L[15-40/0.1]
GLPSQTAG5-L[10-30/0.1]
GLPSQTAG6-L[10-40/0.1]
GLPSQTAG8-L[15-40/0.1]
GLPSQTAG10-L[15-40/0.1]
GLPSQTAH5-L[10-30/0.1]
GLPSQTAH6-L[10-40/0.1]
GLPSQTAH8-L[15-40/0.1]
GLPSQTAH10-L[15-40/0.1]
GLPSQTAM5-L[10-30/0.1]
GLPSQTAM6-L[10-40/0.1]
GLPSQTAM8-L[15-40/0.1]
GLPSQTAM10-L[15-40/0.1]
GLPSQTAP5-L[10-30/0.1]
GLPSQTAP6-L[10-40/0.1]
GLPSQTAP8-L[15-40/0.1]
GLPSQTAP10-L[15-40/0.1]
HLPSQTAG5-L[10-30/0.1]
HLPSQTAG6-L[10-40/0.1]
HLPSQTAG8-L[15-40/0.1]
HLPSQTAG10-L[15-40/0.1]
HLPSQTAH5-L[10-30/0.1]
HLPSQTAH6-L[10-40/0.1]
HLPSQTAH8-L[15-40/0.1]
HLPSQTAH10-L[15-40/0.1]
HLPSQTAM5-L[10-30/0.1]
HLPSQTAM6-L[10-40/0.1]
HLPSQTAM8-L[15-40/0.1]
HLPSQTAM10-L[15-40/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSSurface Treatment Heat Treatment Material Locating Side Outer Dia. P (Ø)
(mm)
Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(Ø)
Mounting Side Tolerance L
(mm)
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent5g65g610 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent6g66g610 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent8g68g615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent10g610g615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent5h75h710 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent6h76h710 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent8h78h715 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent10h710h715 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent5m65m610 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent6m66m610 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent8m68m615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent10m610m615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent5p65p610 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent6p66p610 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent8p68p615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedNot Provided[Steel] SKS3 Equivalent10p610p615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5g65g610 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6g66g610 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8g68g615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10g610g615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5h75h710 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6h76h710 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6h78h715 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10h710h715 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5m65m610 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6m66m610 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8m68m615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10m610m615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5p65p610 ~ 30
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6p66p610 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8p68p615 ~ 40
1 Piece(s) 4 Day(s) 10Not ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10p610p615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5g65g610 ~ 30
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent6g66g610 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent8g68g615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent10g610g615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5h75h710 ~ 30
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent6h76h710 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent8h78h715 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent10h710h715 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5m65m610 ~ 30
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent6m66m610 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent8m68m615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent10m610m615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5p65p610 ~ 30
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent6p66p610 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent8p68p615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent10p610p615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3045g65g610 ~ 30
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3046g66g610 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3048g68g615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS30410g610g615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3045h75h710 ~ 30
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3046h76h710 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3048h78h715 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS30410h710h715 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3045m65m610 ~ 30
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3046m66m610 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3048m68m615 ~ 40
1 Piece(s) 5 Day(s) 10[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS30410m610m615 ~ 40

Loading...

 

Basic Information

Basic Shape Straight / Air Vent Insertion Guide Tip Shape Round Insertion Guide Tip Type Spherical
Insertion Guide Specifications Not Provided Mounting Side Shape Tapped

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)