(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Hex Support Pins - Stepped

Support Pins - Tip Shape Selectable, Pilot:Related Image
Support Pins - Tip Shape Selectable, Pilot:Related Image
 
[ M ]Material[ S ]Surface Treatment[ H ]HardnessPilot
①S45CBlack Oxide-LSPB
②S45CHard Chrome PlatingPlating Hardness: 750HV ~LSPBR
③S45CBlack OxideTreated Hardness: 45 ~ 50HRCLSPBHB
④S45CHard Chrome PlatingTreated Hardness: 45 ~ 50HRC /
Plating Hardness: 750HV ~
LSPBHR
⑤SUS304--LSPBSU
⑥SUS440C or 13Cr stainless-Treated Hardness: 50 ~ 55HRCLSPBSC
[ ! ]SUS304 may not be polished and may have no centering hole.

Specifications

Part Number-L-P-B-E-A
LSPBC12-L25.01-P8.00-B10    
◆Tapped, Threaded
Recommended Tightening Torque (Reference)
M (Coarse)Tightening Torque
N • cm
M3   98
M4  225
M5  461
M6  784
M8 1911
M10 3783
M12 6605
M1616366
M2032928
[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.
Part NumberL
0.01mm Increment
P
0.01mm Increment
B
0.1mm Increment
E
0.1mm Increment (Shape A only)
A
Selection (Shape A only)
R
(Shape C)
dM1 (Coarse)1W2
TypeTip ShapeD
Pilot
LSPB
LSPBR
LSPBHB
LSPBHR
LSPBSU
LSPBSC
A
B
C
1020.00~80.004.00~8.002.0~20.00.5~10.015
30
45
60
1.56M3688
124.00~10.002.0~20.01.58M561010
155.00~10.002.0~25.0210M591310
208.00~15.002.0~30.0312M891710
2510.00~15.002.0~30.0416M892010
[ ! ]For Pilot, D dim. 10 or more is available. [ ! ]Note the strength of undercut part for Pilot.>> P.1566

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
LSPBA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBHBA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHBA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHBA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHBA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHBA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHBB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBHBB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBHBB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBHBB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBHBB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBHBC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBHBC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBHBC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBHBC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBHBC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBHRA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHRA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHRA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHRA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHRA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBHRB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBHRB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBHRB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBHRB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBHRB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBHRC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBHRC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBHRC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBHRC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBHRC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBRA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBRA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBRA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBRA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBRA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBRB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBRB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBRB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBRB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBRB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBRC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBRC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBRC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBRC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBRC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSTip Shape Material Surface Treatment
(Ø)
Hardening Hardness Outer Dia. D
(mm)
A
(°)
B
(mm)
E
(mm)
L
(mm)
P
(mm)
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided1015 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided1215 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided1515 ~ 602 ~ 250.5 ~ 1020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided2015 ~ 602 ~ 300.5 ~ 1020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided2515 ~ 602 ~ 300.5 ~ 1020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC1015 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC1215 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC1515 ~ 602 ~ 250.5 ~ 1020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC2015 ~ 602 ~ 300.5 ~ 1020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC2515 ~ 602 ~ 300.5 ~ 1020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~1015 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~1215 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~1515 ~ 602 ~ 250.5 ~ 1020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~2015 ~ 602 ~ 300.5 ~ 1020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~2515 ~ 602 ~ 300.5 ~ 1020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV1015 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV1215 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV1515 ~ 602 ~ 250.5 ~ 1020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV2015 ~ 602 ~ 300.5 ~ 1020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV2515 ~ 602 ~ 300.5 ~ 1020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV25-2 ~ 30-20 ~ 8010 ~ 15

Loading...

 

Basic Information

Shape Support Pin Height Tolerance 0/+0.05 Mounting Type With Pilot, Tapped

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)