(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Height Adjusting Pins - Flat, Tip Set Screw - Threaded

Height Adjusting Pins  - Flat, Tip Set Screw - Threaded

With Wrench Flats. Locating is possible by attaching a pin on the tip or by Flat Tip adjustment.

Support Pins - Flat, Tip Set Screw - Threaded:Related Image
[ ! ]The range of L dimension should be within 0.02 for same orders.
 
[ M ]Material[ S ]Surface Treatment[ H ]HardnessFlatTip Set Screw Type
ThreadedThreaded with PilotThreaded
①S45C EquivalentBlack Oxide-STPABSTPDBSPFAB
②S45C EquivalentHard Chrome PlatingPlating Hardness: 750HV ~STPARSTPDR-
③S45C EquivalentBlack OxideTreated Hardness: 45 ~ 50HRCSTPAHBSTPDHB-
④S45C EquivalentHard Chrome PlatingTreated Hardness: 45 ~ 50HRC /
Plating Hardness: 750HV ~
STPAHRSTPDHR-
⑤SUS304--STPASUSTPDSU-
⑥SUS440C or 13Cr stainless-Treated Hardness: 50 ~ 55HRCSTPACSTPDC-
[ ! ]SUS304 may not be polished.

Specifications

Part Number-L-P-B 
STPAB10
SPFAB12
-
-
L20.03
L20.01

-

P6

-

B5
(Flat)
(Tip Set Screw)
◆Threaded
Recommended Tightening Torque (Reference)
M (Coarse)Tightening Torque
N • cm
M3   98
M4  225
M5  461
M6  784
M8 1911
M10 3783
M12 6605
M1616366
M2032928
[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.
■Flat
Part NumberL
0.01mm Increment
M (Coarse)dM3 (Coarse)FW
TypeD
Threaded
STPAB
STPAR
STPAHB
STPAHR
STPASU
STPAC
Threaded with Pilot
STPDB
STPDR
STPDHB
STPDHR
STPDSU
STPDC
610.00~50.00M33M31.558
8M55M5278
1020.00~80.00M56M6388
12M58M841010
15M810M1051310
20M812M1251710
■Tip Set Screw
Part NumberL
0.01mm Increment
P SelectionB
0.5mm Increment
dFM1 (Coarse)WAN (Coarse)
TypeD
Threaded
SPFAB
1220.00~80.0064.0~6.084M8101010M3
1520.00~80.0085.0~10.0105M10131015M4
2025.00~80.0010 125.0~15.0125M12171020M4
2530.00~80.0012 165.0~19.0165M16201224M4
3035.00~80.0016 205.0~23.0206M20241828M4

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SPFAB12-L[20-80/0.01]-P6-B[4-6/0.5]
SPFAB15-L[20-80/0.01]-P8-B[5-10/0.5]
SPFAB20-L[25-80/0.01]-P[10,​12]-B[5-15/0.5]
SPFAB25-L[30-80/0.01]-P[12,​16]-B[5-19/0.5]
SPFAB30-L[35-80/0.01]-P[16,​20]-B[5-23/0.5]
STPAB6-L[10-50/0.01]
STPAB8-L[10-50/0.01]
STPAB10-L[20-80/0.01]
STPAB12-L[20-80/0.01]
STPAB15-L[20-80/0.01]
STPAB20-L[20-80/0.01]
STPAC6-L[10-50/0.01]
STPAC8-L[10-50/0.01]
STPAC10-L[20-80/0.01]
STPAC12-L[20-80/0.01]
STPAC15-L[20-80/0.01]
STPAC20-L[20-80/0.01]
STPAHB6-L[10-50/0.01]
STPAHB8-L[10-50/0.01]
STPAHB10-L[20-80/0.01]
STPAHB12-L[20-80/0.01]
STPAHB15-L[20-80/0.01]
STPAHB20-L[20-80/0.01]
STPAHR6-L[10-50/0.01]
STPAHR8-L[10-50/0.01]
STPAHR10-L[20-80/0.01]
STPAHR12-L[20-80/0.01]
STPAHR15-L[20-80/0.01]
STPAHR20-L[20-80/0.01]
STPAR6-L[10-50/0.01]
STPAR8-L[10-50/0.01]
STPAR10-L[20-80/0.01]
STPAR12-L[20-80/0.01]
STPAR15-L[20-80/0.01]
STPAR20-L[20-80/0.01]
STPASU6-L[10-50/0.01]
STPASU8-L[10-50/0.01]
STPASU10-L[20-80/0.01]
STPASU12-L[20-80/0.01]
STPASU15-L[20-80/0.01]
STPASU20-L[20-80/0.01]
STPDB6-L[10-50/0.01]
STPDB8-L[10-50/0.01]
STPDB10-L[20-80/0.01]
STPDB12-L[20-80/0.01]
STPDB15-L[20-80/0.01]
STPDB20-L[20-80/0.01]
STPDC6-L[10-50/0.01]
STPDC8-L[10-50/0.01]
STPDC10-L[20-80/0.01]
STPDC12-L[20-80/0.01]
STPDC15-L[20-80/0.01]
STPDC20-L[20-80/0.01]
STPDHB6-L[10-50/0.01]
STPDHB8-L[10-50/0.01]
STPDHB10-L[20-80/0.01]
STPDHB12-L[20-80/0.01]
STPDHB15-L[20-80/0.01]
STPDHB20-L[20-80/0.01]
STPDHR6-L[10-50/0.01]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSTip Shape Material Surface Treatment
(Ø)
Hardening Hardness Outer Dia. D
(mm)
B
(mm)
L
(mm)
P
(mm)
1 Piece(s) 12 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided124 ~ 620 ~ 806
1 Piece(s) 12 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided155 ~ 1020 ~ 808
1 Piece(s) 12 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided205 ~ 1525 ~ 8010 ~ 12
1 Piece(s) 12 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided255 ~ 1930 ~ 8012 ~ 16
1 Piece(s) 12 Day(s) or more 10Tip Set Screw[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided305 ~ 2335 ~ 8016 ~ 20
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided6-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided8-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC6-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC8-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC6-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC8-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~6-10 ~ 50-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~8-10 ~ 50-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~10-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~12-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~15-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~20-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV6-10 ~ 50-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV8-10 ~ 50-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV10-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV12-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV15-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedPlating Hardness: 750HV20-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided6-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided8-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided10-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided12-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided15-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS304Not ProvidedNot ProvidedNot Provided20-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided6-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided8-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC6-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC8-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC6-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC8-10 ~ 50-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-20 ~ 80-
1 Piece(s) 9 Day(s) or more 10Flat[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-20 ~ 80-
1 Piece(s) 10 Day(s) or more 10Flat[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~6-10 ~ 50-

Loading...

 

Basic Information

Shape Support Pin Height Tolerance 0/+0.05 Mounting Type Threaded

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)