(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Aluminum Frame 8-100 Series/slot width 10/100x200mm

Aluminum Frame 8-100 Series/slot width 10/100x200mm

Aluminum Frame 8-100 Series/slot width 10/100x200 mm.
Aluminum profile is a device used to build machine structures. It is available in various sizes, cross-sectional shapes, and with different types of surface treatments to choose from.
[Feature]
● Shape : Rectangle
● Slot width :10 mm.
● Cross-section rectangle : 100 x 200 mm.
number of slot width x length = 2 X 4 slot
number of slotted surfaces = 4 sides
● Overall length :The size is configurable between 50 to 4000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6061SS-T6 Equivalent and A6063S-T5
● Surface treatment: Clear Anodize
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.

(i)Caution

  • Additional freight and delivery charge are added to items longer than 2000.1mm

Aluminum Extrusion 8-100 Series/slot width 10/100x200mm:Related Image

Aluminum Extrusion 8-100 Series/slot width 10/100x200mm:Related Image

Aluminum Extrusion 8-100 Series/slot width 10/100x200mm:Related Image

[ ! ]Cut surfaces and altered parts are not surface treated.

■8-45 Series
Aluminum Extrusions with 10mm Slot Width. Applicable to M8 Screws.

Specifications

Part Number - L
GFS8-100200 - 800
KGFS8-100200 - 4000


■Configurable Length Extrusion

Type [ M ]Material [ S ]Surface Treatment Part Number L
0.5mm Increment
Mass
kg/m
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
GNFS A6063-T6 Clear Anodize GNFS8-100200 50~4000 20.45 7574 874.3x104 3179.53x104
GFS A6061SS-T6 Equivalent Clear Anodize GFS8-100200 50~4000 20.45 7574 874.3x104 3179.53x104

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.

 

■Fixed Length Extrusions (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type [ M ]Material [ S ]Surface Treatment Part Number L
mm
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
GNFS A6063-T6 Clear Anodize KGNFS8-100200 4000 7574 874.3x104 3179.53x104
GFS A6061SS-T6 Equivalent Clear Anodize KGFS8-100200 4000 7574 874.3x104 3179.53x104

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 8-100 Series/slot width 10/100x200mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-755&756
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends.P2-757
End Tapping 4 Corner HolesLSP/RSP/SPWP2-768
Specify How to CutPrecision CutSCChange total length tolerance. (L±0.5→L±0.2)
[ ! ]Available only for L≦1500
P2-758
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-759&760
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-761&762
CounterboresCounterbores at Specified PositionZ6/XA100Add counterbores at specified position. Use the holes for connecting the frames and a table top.P2-763
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-764
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-765
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-766
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-767
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames.P2-768
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
GFS8-100200-[50-4000/0.5]
GNFS8-100200-[50-4000/0.5]
KGFS8-100200-4000
KGNFS8-100200-4000
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSExtrusion Type_ Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)
1 Piece(s) 12 Day(s) or more 10GFS (High Rigidity)A6061SS-T6 EquivalentConfigurable-50 ~ 4000
1 Piece(s) 12 Day(s) or more 10GNFS (High Rigidity, Economy)A6063S-T6Configurable-50 ~ 4000
1 Piece(s) 12 Day(s) or more 10GFS (High Rigidity)A6061SS-T6 EquivalentStationary4000-
1 Piece(s) 12 Day(s) or more 10GNFS (High Rigidity, Economy)A6063S-T6Stationary4000-

Loading...

  1. 1
 

Basic Information

Standard Extrusion Size(mm) 100 Extrusion Size 100x200 Extrusion Series MISUMI 8-45 Series (10 mm Groove Width)
Extrusion Type Rectangle Shape Number of Extrusion Slots 2 Slots x 2 Slots Surface Treatment Clear Anodize
Number of Slotted Surfaces Four-Side Slots Surface Milled Not Provided Extrusion Size: Width (A)(mm) 100
Extrusion Size: Thickness (T)(mm) 200

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)